From: Jan Kara <jack@suse.cz>
To: linux-fsdevel@vger.kernel.org
Cc: LKML <linux-kernel@vger.kernel.org>,
hch@lst.de, Jan Kara <jack@suse.cz>,
linux-ext4@vger.kernel.org, tytso@mit.edu
Subject: [PATCH 10/16] ext4: Remove syncing logic from ext4_file_write
Date: Wed, 2 Sep 2009 15:59:20 +0200 [thread overview]
Message-ID: <1251899966-7316-11-git-send-email-jack@suse.cz> (raw)
In-Reply-To: <1251899966-7316-1-git-send-email-jack@suse.cz>
The syncing is now properly handled by generic_file_aio_write() so
no special ext4 code is needed.
CC: linux-ext4@vger.kernel.org
CC: tytso@mit.edu
Signed-off-by: Jan Kara <jack@suse.cz>
---
fs/ext4/file.c | 53 ++---------------------------------------------------
1 files changed, 2 insertions(+), 51 deletions(-)
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 3f1873f..aafe432 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -58,10 +58,7 @@ static ssize_t
ext4_file_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
- struct file *file = iocb->ki_filp;
- struct inode *inode = file->f_path.dentry->d_inode;
- ssize_t ret;
- int err;
+ struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode;
/*
* If we have encountered a bitmap-format file, the size limit
@@ -81,53 +78,7 @@ ext4_file_write(struct kiocb *iocb, const struct iovec *iov,
}
}
- ret = generic_file_aio_write(iocb, iov, nr_segs, pos);
- /*
- * Skip flushing if there was an error, or if nothing was written.
- */
- if (ret <= 0)
- return ret;
-
- /*
- * If the inode is IS_SYNC, or is O_SYNC and we are doing data
- * journalling then we need to make sure that we force the transaction
- * to disk to keep all metadata uptodate synchronously.
- */
- if (file->f_flags & O_SYNC) {
- /*
- * If we are non-data-journaled, then the dirty data has
- * already been flushed to backing store by generic_osync_inode,
- * and the inode has been flushed too if there have been any
- * modifications other than mere timestamp updates.
- *
- * Open question --- do we care about flushing timestamps too
- * if the inode is IS_SYNC?
- */
- if (!ext4_should_journal_data(inode))
- return ret;
-
- goto force_commit;
- }
-
- /*
- * So we know that there has been no forced data flush. If the inode
- * is marked IS_SYNC, we need to force one ourselves.
- */
- if (!IS_SYNC(inode))
- return ret;
-
- /*
- * Open question #2 --- should we force data to disk here too? If we
- * don't, the only impact is that data=writeback filesystems won't
- * flush data to disk automatically on IS_SYNC, only metadata (but
- * historically, that is what ext2 has done.)
- */
-
-force_commit:
- err = ext4_force_commit(inode->i_sb);
- if (err)
- return err;
- return ret;
+ return generic_file_aio_write(iocb, iov, nr_segs, pos);
}
static struct vm_operations_struct ext4_file_vm_ops = {
--
1.6.0.2
next prev parent reply other threads:[~2009-09-02 13:59 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-02 13:59 [PATCH 0/16] Make O_SYNC handling use standard syncing path (version 4) Jan Kara
2009-09-02 13:59 ` [PATCH 01/16] vfs: Introduce filemap_fdatawait_range Jan Kara
2009-09-02 13:59 ` [PATCH 02/16] vfs: Export __generic_file_aio_write() and add some comments Jan Kara
2009-09-02 13:59 ` [PATCH 03/16] vfs: Remove syncing from generic_file_direct_write() and generic_file_buffered_write() Jan Kara
2009-09-02 13:59 ` [PATCH 04/16] pohmelfs: Use __generic_file_aio_write instead of generic_file_aio_write_nolock Jan Kara
2009-09-02 13:59 ` [PATCH 05/16] ocfs2: " Jan Kara
2009-09-02 13:59 ` [PATCH 06/16] vfs: Rename generic_file_aio_write_nolock Jan Kara
2009-09-02 21:47 ` Christoph Hellwig
2009-09-03 10:24 ` Jan Kara
2009-09-03 15:37 ` Christoph Hellwig
2009-09-02 13:59 ` [PATCH 07/16] vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode Jan Kara
2009-09-02 13:59 ` [PATCH 08/16] ext2: Update comment about generic_osync_inode Jan Kara
2009-09-02 13:59 ` [PATCH 09/16] ext3: Remove syncing logic from ext3_file_write Jan Kara
2009-09-02 13:59 ` Jan Kara [this message]
2009-09-02 13:59 ` [PATCH 11/16] ntfs: Use new syncing helpers and update comments Jan Kara
2009-09-02 13:59 ` [PATCH 12/16] ocfs2: Update syncing after splicing to match generic version Jan Kara
2009-09-02 13:59 ` [PATCH 13/16] xfs: Convert sync_page_range() to simple filemap_write_and_wait_range() Jan Kara
2009-09-02 13:59 ` [PATCH 14/16] pohmelfs: Use new syncing helper Jan Kara
2009-09-02 13:59 ` [PATCH 15/16] fat: Opencode sync_page_range_nolock() Jan Kara
2009-09-02 13:59 ` [PATCH 16/16] vfs: Remove generic_osync_inode() and sync_page_range{_nolock}() Jan Kara
2009-09-02 14:16 ` [PATCH 0/16] Make O_SYNC handling use standard syncing path (version 4) Christoph Hellwig
2009-09-02 22:18 ` [PATCH] fsync: wait for data writeout completion before calling ->fsync Christoph Hellwig
2009-09-02 22:37 ` Joel Becker
2009-09-03 10:47 ` Jan Kara
2009-09-03 15:39 ` Christoph Hellwig
2009-09-10 20:25 ` [PATCH 18/16] implement posix O_SYNC and O_DSYNC semantics Christoph Hellwig
2009-09-10 20:38 ` Trond Myklebust
2009-09-10 20:40 ` Christoph Hellwig
2009-09-10 20:43 ` Trond Myklebust
2009-09-10 20:44 ` Christoph Hellwig
2009-09-10 23:07 ` Andreas Dilger
2009-09-10 23:18 ` Christoph Hellwig
2009-09-11 19:16 ` [PATCHv2 " Christoph Hellwig
2009-09-14 16:54 ` Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1251899966-7316-11-git-send-email-jack@suse.cz \
--to=jack@suse.cz \
--cc=hch@lst.de \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).