linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Monakhov <dmonakhov@openvz.org>
To: linux-fsdevel@vger.kernel.org
Cc: jack@suse.cz, hch@infradead.org, Dmitry Monakhov <dmonakhov@openvz.org>
Subject: [PATCH 03/12] ext3: handle errors in orphan_cleanup
Date: Wed, 19 May 2010 10:01:59 +0400	[thread overview]
Message-ID: <1274248928-5113-4-git-send-email-dmonakhov@openvz.org> (raw)
In-Reply-To: <1274248928-5113-3-git-send-email-dmonakhov@openvz.org>

Orphan cleanup procedure is complex task and may fail due to number
of reasons. Handle errors from orphan_cleanp according to
predefined per-sb errors behavior flags.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
---
 fs/ext3/super.c |   27 +++++++++++++++++++--------
 1 files changed, 19 insertions(+), 8 deletions(-)

diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 0fc1293..5ca068f 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -1438,23 +1438,24 @@ static int ext3_check_descriptors(struct super_block *sb)
  * e2fsck was run on this filesystem, and it must have already done the orphan
  * inode cleanup for us, so we can safely abort without any further action.
  */
-static void ext3_orphan_cleanup (struct super_block * sb,
+static int ext3_orphan_cleanup (struct super_block * sb,
 				 struct ext3_super_block * es)
 {
 	unsigned int s_flags = sb->s_flags;
 	int nr_orphans = 0, nr_truncates = 0;
+	int ret = 0;
 #ifdef CONFIG_QUOTA
 	int i;
 #endif
 	if (!es->s_last_orphan) {
 		jbd_debug(4, "no orphan inodes to clean up\n");
-		return;
+		return ret;
 	}
 
 	if (bdev_read_only(sb->s_bdev)) {
 		ext3_msg(sb, KERN_ERR, "error: write access "
 			"unavailable, skipping orphan cleanup.");
-		return;
+		return ret;
 	}
 
 	if (EXT3_SB(sb)->s_mount_state & EXT3_ERROR_FS) {
@@ -1463,7 +1464,7 @@ static void ext3_orphan_cleanup (struct super_block * sb,
 				  "clearing orphan list.\n");
 		es->s_last_orphan = 0;
 		jbd_debug(1, "Skipping orphan recovery on fs with errors.\n");
-		return;
+		return ret;
 	}
 
 	if (s_flags & MS_RDONLY) {
@@ -1476,11 +1477,13 @@ static void ext3_orphan_cleanup (struct super_block * sb,
 	/* Turn on quotas so that they are updated correctly */
 	for (i = 0; i < MAXQUOTAS; i++) {
 		if (EXT3_SB(sb)->s_qf_names[i]) {
-			int ret = ext3_quota_on_mount(sb, i);
-			if (ret < 0)
+			ret = ext3_quota_on_mount(sb, i);
+			if (ret < 0) {
 				ext3_msg(sb, KERN_ERR,
 					"error: cannot turn on journaled "
 					"quota: %d", ret);
+				goto out;
+			}
 		}
 	}
 #endif
@@ -1514,7 +1517,7 @@ static void ext3_orphan_cleanup (struct super_block * sb,
 		}
 		iput(inode);  /* The delete magic happens here! */
 	}
-
+out:
 #define PLURAL(x) (x), ((x)==1) ? "" : "s"
 
 	if (nr_orphans)
@@ -1523,6 +1526,9 @@ static void ext3_orphan_cleanup (struct super_block * sb,
 	if (nr_truncates)
 		ext3_msg(sb, KERN_INFO, "%d truncate%s cleaned up",
 		       PLURAL(nr_truncates));
+	if (ret)
+		ext3_msg(sb, KERN_ERR, "Error %d wile orphan cleanup", ret);
+
 #ifdef CONFIG_QUOTA
 	/* Turn quotas off */
 	for (i = 0; i < MAXQUOTAS; i++) {
@@ -1531,6 +1537,7 @@ static void ext3_orphan_cleanup (struct super_block * sb,
 	}
 #endif
 	sb->s_flags = s_flags; /* Restore MS_RDONLY status */
+	return ret;
 }
 
 /*
@@ -2034,7 +2041,11 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
 	ext3_setup_super (sb, es, sb->s_flags & MS_RDONLY);
 
 	EXT3_SB(sb)->s_mount_state |= EXT3_ORPHAN_FS;
-	ext3_orphan_cleanup(sb, es);
+	ret = ext3_orphan_cleanup(sb, es);
+
+	if (ret)
+		goto failed_mount3;
+
 	EXT3_SB(sb)->s_mount_state &= ~EXT3_ORPHAN_FS;
 	if (needs_recovery)
 		ext3_msg(sb, KERN_INFO, "recovery complete");
-- 
1.6.6.1


  reply	other threads:[~2010-05-19  6:02 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-19  6:01 [PATCH 00/12] quota: Redesign IO error handling interface V2 Dmitry Monakhov
2010-05-19  6:01 ` [PATCH 01/12] quota: Add proper error handling on quota initialization Dmitry Monakhov
2010-05-19  6:01   ` [PATCH 02/12] quota: Check what quota is properly initialized for inode before charge Dmitry Monakhov
2010-05-19  6:01     ` Dmitry Monakhov [this message]
2010-05-19  6:02       ` [PATCH 04/12] ext4: handle errors in orphan_cleanup Dmitry Monakhov
2010-05-19  6:02         ` [PATCH 05/12] ufs: add error handling for dquot_initialize Dmitry Monakhov
2010-05-19  6:02           ` [PATCH 06/12] udf: " Dmitry Monakhov
2010-05-19  6:02             ` [PATCH 07/12] reiserfs: " Dmitry Monakhov
2010-05-19  6:02               ` [PATCH 08/12] ocfs2: " Dmitry Monakhov
2010-05-19  6:02                 ` [PATCH 09/12] jfs: " Dmitry Monakhov
2010-05-19  6:02                   ` [PATCH 10/12] ext4: " Dmitry Monakhov
2010-05-19  6:02                     ` [PATCH 11/12] ext3: " Dmitry Monakhov
2010-05-19  6:02                       ` [PATCH 12/12] ext2: " Dmitry Monakhov
2010-05-20 17:30                         ` Jan Kara
2010-05-20 17:32                       ` [PATCH 11/12] ext3: " Jan Kara
2010-05-20 17:34             ` [PATCH 06/12] udf: " Jan Kara
2010-05-20 17:33           ` [PATCH 05/12] ufs: " Jan Kara
2010-05-20 17:35       ` [PATCH 03/12] ext3: handle errors in orphan_cleanup Jan Kara
2010-05-20 18:13     ` [PATCH 02/12] quota: Check what quota is properly initialized for inode before charge Jan Kara
2010-05-20 18:05   ` [PATCH 01/12] quota: Add proper error handling on quota initialization Jan Kara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1274248928-5113-4-git-send-email-dmonakhov@openvz.org \
    --to=dmonakhov@openvz.org \
    --cc=hch@infradead.org \
    --cc=jack@suse.cz \
    --cc=linux-fsdevel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).