linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dave Chinner <david@fromorbit.com>
To: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 18/21] fs: introduce a per-cpu last_ino allocator
Date: Thu, 21 Oct 2010 11:49:43 +1100	[thread overview]
Message-ID: <1287622186-1935-19-git-send-email-david@fromorbit.com> (raw)
In-Reply-To: <1287622186-1935-1-git-send-email-david@fromorbit.com>

From: Eric Dumazet <eric.dumazet@gmail.com>

new_inode() dirties a contended cache line to get increasing
inode numbers. This limits performance on workloads that cause
significant parallel inode allocation.

Solve this problem by using a per_cpu variable fed by the shared
last_ino in batches of 1024 allocations.  This reduces contention on
the shared last_ino, and give same spreading ino numbers than before
(i.e. same wraparound after 2^32 allocations).

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/inode.c |   45 ++++++++++++++++++++++++++++++++++++++-------
 1 files changed, 38 insertions(+), 7 deletions(-)

diff --git a/fs/inode.c b/fs/inode.c
index ba514a1..b33b57c 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -815,6 +815,43 @@ repeat:
 	return NULL;
 }
 
+/*
+ * Each cpu owns a range of LAST_INO_BATCH numbers.
+ * 'shared_last_ino' is dirtied only once out of LAST_INO_BATCH allocations,
+ * to renew the exhausted range.
+ *
+ * This does not significantly increase overflow rate because every CPU can
+ * consume at most LAST_INO_BATCH-1 unused inode numbers. So there is
+ * NR_CPUS*(LAST_INO_BATCH-1) wastage. At 4096 and 1024, this is ~0.1% of the
+ * 2^32 range, and is a worst-case. Even a 50% wastage would only increase
+ * overflow rate by 2x, which does not seem too significant.
+ *
+ * On a 32bit, non LFS stat() call, glibc will generate an EOVERFLOW
+ * error if st_ino won't fit in target struct field. Use 32bit counter
+ * here to attempt to avoid that.
+ */
+#define LAST_INO_BATCH 1024
+static DEFINE_PER_CPU(unsigned int, last_ino);
+
+static unsigned int get_next_ino(void)
+{
+	unsigned int *p = &get_cpu_var(last_ino);
+	unsigned int res = *p;
+
+#ifdef CONFIG_SMP
+	if (unlikely((res & (LAST_INO_BATCH-1)) == 0)) {
+		static atomic_t shared_last_ino;
+		int next = atomic_add_return(LAST_INO_BATCH, &shared_last_ino);
+
+		res = next - LAST_INO_BATCH;
+	}
+#endif
+
+	*p = ++res;
+	put_cpu_var(last_ino);
+	return res;
+}
+
 /**
  *	new_inode 	- obtain an inode
  *	@sb: superblock
@@ -829,12 +866,6 @@ repeat:
  */
 struct inode *new_inode(struct super_block *sb)
 {
-	/*
-	 * On a 32bit, non LFS stat() call, glibc will generate an EOVERFLOW
-	 * error if st_ino won't fit in target struct field. Use 32bit counter
-	 * here to attempt to avoid that.
-	 */
-	static unsigned int last_ino;
 	struct inode *inode;
 
 	spin_lock_prefetch(&inode_lock);
@@ -846,7 +877,7 @@ struct inode *new_inode(struct super_block *sb)
 		 * set the inode state before we make the inode accessible to
 		 * the outside world.
 		 */
-		inode->i_ino = ++last_ino;
+		inode->i_ino = get_next_ino();
 		inode->i_state = 0;
 		__inode_sb_list_add(inode);
 		spin_unlock(&inode_lock);
-- 
1.7.1


  parent reply	other threads:[~2010-10-21  0:50 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-21  0:49 Inode Lock Scalability V6 Dave Chinner
2010-10-21  0:49 ` [PATCH 01/21] fs: switch bdev inode bdi's correctly Dave Chinner
2010-10-21  0:49 ` [PATCH 02/21] kernel: add bl_list Dave Chinner
2010-10-21  0:49 ` [PATCH 03/21] fs: Convert nr_inodes and nr_unused to per-cpu counters Dave Chinner
2010-10-21  0:49 ` [PATCH 04/21] fs: Implement lazy LRU updates for inodes Dave Chinner
2010-10-21  2:14   ` Christian Stroetmann
2010-10-21 10:07   ` Nick Piggin
2010-10-21 12:22     ` Christoph Hellwig
2010-10-23  9:32   ` Al Viro
2010-10-21  0:49 ` [PATCH 05/21] fs: inode split IO and LRU lists Dave Chinner
2010-10-21  0:49 ` [PATCH 06/21] fs: Clean up inode reference counting Dave Chinner
2010-10-21  1:41   ` Christoph Hellwig
2010-10-21  0:49 ` [PATCH 07/21] exofs: use iput() for inode reference count decrements Dave Chinner
2010-10-21  0:49 ` [PATCH 08/21] fs: rework icount to be a locked variable Dave Chinner
2010-10-21 19:40   ` Al Viro
2010-10-21 22:32     ` Dave Chinner
2010-10-21  0:49 ` [PATCH 09/21] fs: Factor inode hash operations into functions Dave Chinner
2010-10-21  0:49 ` [PATCH 10/21] fs: Stop abusing find_inode_fast in iunique Dave Chinner
2010-10-21  0:49 ` [PATCH 11/21] fs: move i_ref increments into find_inode/find_inode_fast Dave Chinner
2010-10-21  0:49 ` [PATCH 12/21] fs: remove inode_add_to_list/__inode_add_to_list Dave Chinner
2010-10-21  0:49 ` [PATCH 13/21] fs: Introduce per-bucket inode hash locks Dave Chinner
2010-10-21  0:49 ` [PATCH 14/21] fs: add a per-superblock lock for the inode list Dave Chinner
2010-10-21  0:49 ` [PATCH 15/21] fs: split locking of inode writeback and LRU lists Dave Chinner
2010-10-21  0:49 ` [PATCH 16/21] fs: Protect inode->i_state with the inode->i_lock Dave Chinner
2010-10-22  1:56   ` Al Viro
2010-10-22  2:26     ` Nick Piggin
2010-10-22  3:14     ` Dave Chinner
2010-10-22 10:37       ` Al Viro
2010-10-22 11:40         ` Christoph Hellwig
2010-10-23 21:40           ` Al Viro
2010-10-23 21:37         ` Al Viro
2010-10-24 14:13           ` Christoph Hellwig
2010-10-24 16:21             ` Christoph Hellwig
2010-10-24 19:17               ` Al Viro
2010-10-24 20:04                 ` Christoph Hellwig
2010-10-24 20:36                   ` Al Viro
2010-10-24  2:18       ` Nick Piggin
2010-10-21  0:49 ` [PATCH 17/21] fs: protect wake_up_inode with inode->i_lock Dave Chinner
2010-10-21  2:17   ` Christoph Hellwig
2010-10-21 13:16     ` Nick Piggin
2010-10-21  0:49 ` Dave Chinner [this message]
2010-10-21  0:49 ` [PATCH 19/21] fs: icache remove inode_lock Dave Chinner
2010-10-21  2:14   ` Christian Stroetmann
2010-10-21  0:49 ` [PATCH 20/21] fs: Reduce inode I_FREEING and factor inode disposal Dave Chinner
2010-10-21  0:49 ` [PATCH 21/21] fs: do not assign default i_ino in new_inode Dave Chinner
2010-10-21  5:04 ` Inode Lock Scalability V7 (was V6) Dave Chinner
2010-10-21 13:20   ` Nick Piggin
2010-10-21 23:52     ` Dave Chinner
2010-10-22  0:45       ` Nick Piggin
2010-10-22  2:20         ` Al Viro
2010-10-22  2:34           ` Nick Piggin
2010-10-22  2:41             ` Nick Piggin
2010-10-22  2:48               ` Nick Piggin
2010-10-22  3:12                 ` Al Viro
2010-10-22  4:48                   ` Nick Piggin
2010-10-22  3:07             ` Al Viro
2010-10-22  4:46               ` Nick Piggin
2010-10-22  5:01                 ` Nick Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1287622186-1935-19-git-send-email-david@fromorbit.com \
    --to=david@fromorbit.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).