From: Ryan Mallon <ryan-7Wk5F4Od5/oYd5yxfr4S2w@public.gmane.org>
To: viro-RmSDqhL/yNMiFSDQTTA3OLVCufUGDwFn@public.gmane.org,
dchinner-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
Trond.Myklebust-HgOvQuBEEgTQT0dZR+AlfA@public.gmane.org
Cc: linux-fsdevel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Ryan Mallon <ryan-7Wk5F4Od5/oYd5yxfr4S2w@public.gmane.org>
Subject: [RFC PATCH 0/2] Introduce unlocked version of igrab
Date: Mon, 28 Mar 2011 14:55:59 +1300 [thread overview]
Message-ID: <1301277361-9453-1-git-send-email-ryan@bluewatersys.com> (raw)
Commit 250df6ed274d767da844a5d9f05720b804240197 "fs: protect
inode->i_state with inode->i_lock" introduces a change to igrab to acquire
inode->i_lock.
This change causes a panic on boot on my ARM EP93xx board when the rootfs
uses NFS. The problem occurs because nfs_inode_add_request acquires
inode->i_lock and then calls igrab, resulting in the following panic:
BUG: spinlock recursion on CPU#0, getty/262
lock: cc421cb4, .magic: dead4ead, .owner: getty/262, .owner_cpu: 0
[<c0031b0c>] (unwind_backtrace+0x0/0xe4) from [<c015f16c>] (do_raw_spin_lock+0x40/0x13c)
[<c015f16c>] (do_raw_spin_lock+0x40/0x13c) from [<c00a938c>] (igrab+0x14/0x48)
[<c00a938c>] (igrab+0x14/0x48) from [<c01186bc>] (nfs_updatepage+0x2e0/0x524)
[<c01186bc>] (nfs_updatepage+0x2e0/0x524) from [<c010b19c>] (nfs_write_end+0x23c/0x270)
[<c010b19c>] (nfs_write_end+0x23c/0x270) from [<c006b484>] (generic_file_buffered_write+0x180/0x248)
[<c006b484>] (generic_file_buffered_write+0x180/0x248) from [<c006d060>] (__generic_file_aio_write+0x3b8/0x3f4)
[<c006d060>] (__generic_file_aio_write+0x3b8/0x3f4) from [<c006d108>] (generic_file_aio_write+0x6c/0xdc)
[<c006d108>] (generic_file_aio_write+0x6c/0xdc) from [<c010bce0>] (nfs_file_write+0xec/0x178)
[<c010bce0>] (nfs_file_write+0xec/0x178) from [<c00956ac>] (do_sync_write+0xa4/0xe4)
[<c00956ac>] (do_sync_write+0xa4/0xe4) from [<c00960c8>] (vfs_write+0xb4/0x12c)
[<c00960c8>] (vfs_write+0xb4/0x12c) from [<c00961f0>] (sys_write+0x3c/0x68)
[<c00961f0>] (sys_write+0x3c/0x68) from [<c002c8e0>] (ret_fast_syscall+0x0/0x2c)
This series introduces a new function called __igrab, which is an unlocked
version of igrab and modifies nfs_inode_add_request to use the unlocked
version.
Ryan Mallon (2):
Add unlocked version of igrab.
Use __igrab instead of igrab in nfs_inode_add_request
fs/inode.c | 16 ++++++++++++----
fs/nfs/write.c | 2 +-
include/linux/fs.h | 1 +
3 files changed, 14 insertions(+), 5 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2011-03-28 1:55 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-28 1:55 Ryan Mallon [this message]
2011-03-28 1:56 ` [RFC PATCH 1/2] Add unlocked version of igrab Ryan Mallon
[not found] ` <1301277361-9453-2-git-send-email-ryan-7Wk5F4Od5/oYd5yxfr4S2w@public.gmane.org>
2011-03-28 2:54 ` Matthew Wilcox
[not found] ` <20110328025423.GN13806-6jwH94ZQLHl74goWV3ctuw@public.gmane.org>
2011-03-28 4:39 ` Ryan Mallon
[not found] ` <4D9010F1.1040909-7Wk5F4Od5/oYd5yxfr4S2w@public.gmane.org>
2011-03-28 5:19 ` [PATCH] fs: don't use igrab() while holding i_lock (was Re: [RFC PATCH 1/2] Add unlocked version of igrab.) Dave Chinner
2011-03-28 1:56 ` [RFC PATCH 2/2] Use __igrab instead of igrab in nfs_inode_add_request Ryan Mallon
[not found] ` <1301277361-9453-1-git-send-email-ryan-7Wk5F4Od5/oYd5yxfr4S2w@public.gmane.org>
2011-03-28 4:43 ` [RFC PATCH 0/2] Introduce unlocked version of igrab Dave Chinner
2011-03-28 4:47 ` Ryan Mallon
2011-03-28 5:03 ` Ryan Mallon
[not found] ` <4D9016B7.1080505-7Wk5F4Od5/oYd5yxfr4S2w@public.gmane.org>
2011-03-28 6:01 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1301277361-9453-1-git-send-email-ryan@bluewatersys.com \
--to=ryan-7wk5f4od5/oyd5yxfr4s2w@public.gmane.org \
--cc=Trond.Myklebust-HgOvQuBEEgTQT0dZR+AlfA@public.gmane.org \
--cc=dchinner-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-fsdevel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-nfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=viro-RmSDqhL/yNMiFSDQTTA3OLVCufUGDwFn@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).