From: Greg Thelen <gthelen@google.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
containers@lists.osdl.org, linux-fsdevel@vger.kernel.org,
Andrea Righi <arighi@develer.com>,
Balbir Singh <balbir@linux.vnet.ibm.com>,
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>,
Minchan Kim <minchan.kim@gmail.com>,
Johannes Weiner <hannes@cmpxchg.org>,
Ciju Rajan K <ciju@linux.vnet.ibm.com>,
David Rientjes <rientjes@google.com>,
Wu Fengguang <fengguang.wu@intel.com>,
Vivek Goyal <vgoyal@redhat.com>,
Dave Chinner <david@fromorbit.com>,
Greg Thelen <gthelen@google.com>
Subject: [PATCH v8 12/12] memcg: check memcg dirty limits in page writeback
Date: Fri, 3 Jun 2011 09:16:37 -0700 [thread overview]
Message-ID: <1307117797-747-1-git-send-email-gthelen@google.com> (raw)
If the current process is in a non-root memcg, then
balance_dirty_pages() will consider the memcg dirty limits as well as
the system-wide limits. This allows different cgroups to have distinct
dirty limits which trigger direct and background writeback at different
levels.
If called with a mem_cgroup, then throttle_vm_writeout() queries the
given cgroup for its dirty memory usage limits.
Signed-off-by: Andrea Righi <arighi@develer.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
---
include/linux/writeback.h | 3 ++-
mm/page-writeback.c | 35 +++++++++++++++++++++++++++++------
mm/vmscan.c | 2 +-
3 files changed, 32 insertions(+), 8 deletions(-)
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 4f5c0d2..0b4b851 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -8,6 +8,7 @@
#include <linux/fs.h>
struct backing_dev_info;
+struct mem_cgroup;
/*
* fs/fs-writeback.c
@@ -91,7 +92,7 @@ void laptop_mode_timer_fn(unsigned long data);
#else
static inline void laptop_sync_completion(void) { }
#endif
-void throttle_vm_writeout(gfp_t gfp_mask);
+void throttle_vm_writeout(gfp_t gfp_mask, struct mem_cgroup *mem_cgroup);
/* These are exported to sysctl. */
extern int dirty_background_ratio;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 62fcf3d..30c265b 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -473,7 +473,8 @@ unsigned long bdi_dirty_limit(struct backing_dev_info *bdi, unsigned long dirty)
* data. It looks at the number of dirty pages in the machine and will force
* the caller to perform writeback if the system is over `vm_dirty_ratio'.
* If we're over `background_thresh' then the writeback threads are woken to
- * perform some writeout.
+ * perform some writeout. The current task may belong to a cgroup with
+ * dirty limits, which are also checked.
*/
static void balance_dirty_pages(struct address_space *mapping,
unsigned long write_chunk)
@@ -488,6 +489,8 @@ static void balance_dirty_pages(struct address_space *mapping,
bool dirty_exceeded = false;
struct backing_dev_info *bdi = mapping->backing_dev_info;
+ mem_cgroup_balance_dirty_pages(mapping, write_chunk);
+
for (;;) {
struct writeback_control wbc = {
.sync_mode = WB_SYNC_NONE,
@@ -651,23 +654,43 @@ void balance_dirty_pages_ratelimited_nr(struct address_space *mapping,
}
EXPORT_SYMBOL(balance_dirty_pages_ratelimited_nr);
-void throttle_vm_writeout(gfp_t gfp_mask)
+/*
+ * Throttle the current task if it is near dirty memory usage limits. Both
+ * global dirty memory limits and (if @mem_cgroup is given) per-cgroup dirty
+ * memory limits are checked.
+ *
+ * If near limits, then wait for usage to drop. Dirty usage should drop because
+ * dirty producers should have used balance_dirty_pages(), which would have
+ * scheduled writeback.
+ */
+void throttle_vm_writeout(gfp_t gfp_mask, struct mem_cgroup *mem_cgroup)
{
unsigned long background_thresh;
unsigned long dirty_thresh;
+ struct dirty_info memcg_info;
+ bool do_memcg;
for ( ; ; ) {
global_dirty_limits(&background_thresh, &dirty_thresh);
+ do_memcg = mem_cgroup &&
+ mem_cgroup_hierarchical_dirty_info(
+ determine_dirtyable_memory(), mem_cgroup,
+ &memcg_info);
/*
* Boost the allowable dirty threshold a bit for page
* allocators so they don't get DoS'ed by heavy writers
*/
dirty_thresh += dirty_thresh / 10; /* wheeee... */
-
- if (global_page_state(NR_UNSTABLE_NFS) +
- global_page_state(NR_WRITEBACK) <= dirty_thresh)
- break;
+ if (do_memcg)
+ memcg_info.dirty_thresh += memcg_info.dirty_thresh / 10;
+
+ if ((global_page_state(NR_UNSTABLE_NFS) +
+ global_page_state(NR_WRITEBACK) <= dirty_thresh) &&
+ (!do_memcg ||
+ (memcg_info.nr_unstable_nfs +
+ memcg_info.nr_writeback <= memcg_info.dirty_thresh)))
+ break;
congestion_wait(BLK_RW_ASYNC, HZ/10);
/*
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 292582c..66324a4 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1953,7 +1953,7 @@ restart:
sc->nr_scanned - nr_scanned, sc))
goto restart;
- throttle_vm_writeout(sc->gfp_mask);
+ throttle_vm_writeout(sc->gfp_mask, sc->mem_cgroup);
}
/*
--
1.7.3.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2011-06-03 16:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-03 16:16 Greg Thelen [this message]
2011-06-05 4:52 ` [PATCH v8 12/12] memcg: check memcg dirty limits in page writeback Minchan Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1307117797-747-1-git-send-email-gthelen@google.com \
--to=gthelen@google.com \
--cc=akpm@linux-foundation.org \
--cc=arighi@develer.com \
--cc=balbir@linux.vnet.ibm.com \
--cc=ciju@linux.vnet.ibm.com \
--cc=containers@lists.osdl.org \
--cc=david@fromorbit.com \
--cc=fengguang.wu@intel.com \
--cc=hannes@cmpxchg.org \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=minchan.kim@gmail.com \
--cc=nishimura@mxp.nes.nec.co.jp \
--cc=rientjes@google.com \
--cc=vgoyal@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).