From: Dave Kleikamp <dave.kleikamp@oracle.com>
To: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
Zach Brown <zab@zabbo.net>,
"Maxim V. Patlasov" <mpatlasov@parallels.com>,
Dave Kleikamp <dave.kleikamp@oracle.com>
Subject: [PATCH V6 00/30] loop: Issue O_DIRECT aio using bio_vec
Date: Tue, 29 Jan 2013 10:23:13 -0600 [thread overview]
Message-ID: <1359476623-10544-1-git-send-email-dave.kleikamp@oracle.com> (raw)
Al,
I'd like to push this patchset to linux-next. Would you like to pull it
into your vfs tree, would you rather I submitted it separately, or do
you have any issues with it before including it?
This patchset was begun by Zach Brown and was originally submitted for
review in October, 2009. Feedback was positive, and I have picked up
where he left off, porting his patches to the latest mainline kernel
and adding support more file systems.
This patch series adds a kernel interface to fs/aio.c so that kernel code can
issue concurrent asynchronous IO to file systems. It adds an aio command and
file system methods which specify io memory with pages instead of userspace
addresses.
This series was written to reduce the current overhead loop imposes by
performing synchronus buffered file system IO from a kernel thread. These
patches turn loop into a light weight layer that translates bios into iocbs.
It introduces new file ops, read_iter() and write_iter(), that replace the
aio_read() and aio_write() operations. The iov_iter structure can now contain
either a user-space iovec or a kernel-space bio_vec. Since it would be
overly complicated to replace every instance of aio_read() and aio_write(),
the old operations are not removed, but file systems implementing the new
ones need not keep the old ones.
The only change from V5 is a fixing a serious cut-and-paste error in patch
17 that made aio writes fail.
These patches apply to 3.8-rc5 and are also available at:
git://github.com/kleikamp/linux-shaggy.git loop_v6
Asias He (1):
block_dev: add support for read_iter, write_iter
Dave Kleikamp (17):
iov_iter: iov_iter_copy_from_user() should use non-atomic copy
fuse: convert fuse to use iov_iter_copy_[to|from]_user
dio: Convert direct_IO to use iov_iter
dio: add bio_vec support to __blockdev_direct_IO()
fs: create file_readable() and file_writable() functions
fs: use read_iter and write_iter rather than aio_read and aio_write
fs: add read_iter and write_iter to several file systems
ext4: add support for read_iter and write_iter
nfs: add support for read_iter, write_iter
nfs: simplify swap
btrfs: add support for read_iter and write_iter
xfs: add support for read_iter and write_iter
gfs2: Convert aio_read/write ops to read/write_iter
udf: convert file ops from aio_read/write to read/write_iter
afs: add support for read_iter and write_iter
ecrpytfs: Convert aio_read/write ops to read/write_iter
ubifs: convert file ops from aio_read/write to read/write_iter
Zach Brown (12):
iov_iter: move into its own file
iov_iter: add copy_to_user support
iov_iter: hide iovec details behind ops function pointers
iov_iter: add bvec support
iov_iter: add a shorten call
iov_iter: let callers extract iovecs and bio_vecs
fs: pull iov_iter use higher up the stack
aio: add aio_kernel_() interface
aio: add aio support for iov_iter arguments
bio: add bvec_length(), like iov_length()
loop: use aio to perform io on the underlying file
ocfs2: add support for read_iter, write_iter, and direct_IO_bvec
Documentation/filesystems/Locking | 6 +-
Documentation/filesystems/vfs.txt | 12 +-
drivers/block/loop.c | 148 +++++++++----
drivers/char/raw.c | 4 +-
drivers/mtd/nand/nandsim.c | 4 +-
drivers/staging/ccg/storage_common.c | 4 +-
drivers/usb/gadget/storage_common.c | 4 +-
fs/9p/vfs_addr.c | 12 +-
fs/9p/vfs_file.c | 8 +-
fs/Makefile | 2 +-
fs/adfs/file.c | 4 +-
fs/affs/file.c | 4 +-
fs/afs/file.c | 4 +-
fs/afs/internal.h | 3 +-
fs/afs/write.c | 9 +-
fs/aio.c | 170 ++++++++++++++-
fs/bad_inode.c | 14 ++
fs/bfs/file.c | 4 +-
fs/block_dev.c | 27 ++-
fs/btrfs/file.c | 42 ++--
fs/btrfs/inode.c | 61 +++---
fs/ceph/addr.c | 3 +-
fs/cifs/file.c | 4 +-
fs/compat.c | 10 +-
fs/direct-io.c | 223 ++++++++++++++------
fs/ecryptfs/file.c | 15 +-
fs/exofs/file.c | 4 +-
fs/ext2/file.c | 4 +-
fs/ext2/inode.c | 8 +-
fs/ext3/file.c | 4 +-
fs/ext3/inode.c | 15 +-
fs/ext4/ext4.h | 3 +-
fs/ext4/file.c | 34 +--
fs/ext4/indirect.c | 16 +-
fs/ext4/inode.c | 23 +-
fs/f2fs/data.c | 4 +-
fs/f2fs/file.c | 4 +-
fs/fat/file.c | 4 +-
fs/fat/inode.c | 10 +-
fs/fuse/file.c | 40 ++--
fs/gfs2/aops.c | 7 +-
fs/gfs2/file.c | 21 +-
fs/hfs/inode.c | 11 +-
fs/hfsplus/inode.c | 10 +-
fs/hostfs/hostfs_kern.c | 4 +-
fs/hpfs/file.c | 4 +-
fs/iov-iter.c | 386 ++++++++++++++++++++++++++++++++++
fs/jffs2/file.c | 8 +-
fs/jfs/file.c | 4 +-
fs/jfs/inode.c | 7 +-
fs/logfs/file.c | 4 +-
fs/minix/file.c | 4 +-
fs/nfs/direct.c | 302 +++++++++++++++++---------
fs/nfs/file.c | 33 ++-
fs/nfs/internal.h | 4 +-
fs/nfs/nfs4file.c | 4 +-
fs/nilfs2/file.c | 4 +-
fs/nilfs2/inode.c | 8 +-
fs/ocfs2/aops.c | 8 +-
fs/ocfs2/aops.h | 2 +-
fs/ocfs2/file.c | 53 ++---
fs/ocfs2/inode.h | 2 -
fs/ocfs2/ocfs2_trace.h | 6 +-
fs/omfs/file.c | 4 +-
fs/ramfs/file-mmu.c | 4 +-
fs/ramfs/file-nommu.c | 4 +-
fs/read_write.c | 66 +++++-
fs/read_write.h | 4 +
fs/reiserfs/file.c | 4 +-
fs/reiserfs/inode.c | 7 +-
fs/romfs/mmap-nommu.c | 2 +-
fs/sysv/file.c | 4 +-
fs/ubifs/file.c | 12 +-
fs/udf/file.c | 13 +-
fs/udf/inode.c | 10 +-
fs/ufs/file.c | 4 +-
fs/xfs/xfs_aops.c | 13 +-
fs/xfs/xfs_file.c | 51 ++---
include/linux/aio.h | 18 ++
include/linux/bio.h | 8 +
include/linux/blk_types.h | 2 -
include/linux/fs.h | 155 ++++++++++++--
include/linux/nfs_fs.h | 13 +-
include/uapi/linux/aio_abi.h | 2 +
include/uapi/linux/loop.h | 1 +
mm/filemap.c | 395 +++++++++++++++--------------------
mm/page_io.c | 15 +-
87 files changed, 1789 insertions(+), 892 deletions(-)
create mode 100644 fs/iov-iter.c
--
1.8.1.1
next reply other threads:[~2013-01-29 16:23 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-29 16:23 Dave Kleikamp [this message]
2013-01-29 16:23 ` [PATCH V6 01/30] iov_iter: move into its own file Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 02/30] iov_iter: iov_iter_copy_from_user() should use non-atomic copy Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 03/30] iov_iter: add copy_to_user support Dave Kleikamp
[not found] ` <1359476623-10544-1-git-send-email-dave.kleikamp-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2013-01-29 16:23 ` [PATCH V6 04/30] fuse: convert fuse to use iov_iter_copy_[to|from]_user Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 05/30] iov_iter: hide iovec details behind ops function pointers Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 06/30] iov_iter: add bvec support Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 07/30] iov_iter: add a shorten call Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 08/30] iov_iter: let callers extract iovecs and bio_vecs Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 09/30] dio: Convert direct_IO to use iov_iter Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 10/30] dio: add bio_vec support to __blockdev_direct_IO() Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 11/30] fs: pull iov_iter use higher up the stack Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 12/30] aio: add aio_kernel_() interface Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 13/30] aio: add aio support for iov_iter arguments Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 14/30] bio: add bvec_length(), like iov_length() Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 15/30] loop: use aio to perform io on the underlying file Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 16/30] fs: create file_readable() and file_writable() functions Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 17/30] fs: use read_iter and write_iter rather than aio_read and aio_write Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 18/30] fs: add read_iter and write_iter to several file systems Dave Kleikamp
2013-02-01 7:51 ` Artem Bityutskiy
2013-02-01 20:40 ` Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 19/30] ocfs2: add support for read_iter, write_iter, and direct_IO_bvec Dave Kleikamp
2013-01-30 0:59 ` Joel Becker
2013-01-29 16:23 ` [PATCH V6 20/30] ext4: add support for read_iter and write_iter Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 21/30] nfs: add support for read_iter, write_iter Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 22/30] nfs: simplify swap Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 23/30] btrfs: add support for read_iter and write_iter Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 24/30] block_dev: add support for read_iter, write_iter Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 25/30] xfs: add support for read_iter and write_iter Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 26/30] gfs2: Convert aio_read/write ops to read/write_iter Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 27/30] udf: convert file ops from aio_read/write " Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 28/30] afs: add support for read_iter and write_iter Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 29/30] ecrpytfs: Convert aio_read/write ops to read/write_iter Dave Kleikamp
2013-01-29 16:23 ` [PATCH V6 30/30] ubifs: convert file ops from aio_read/write " Dave Kleikamp
2013-01-29 18:42 ` [PATCH V6 00/30] loop: Issue O_DIRECT aio using bio_vec Jeff Moyer
2013-01-29 18:45 ` Dave Kleikamp
2013-01-30 3:22 ` Dave Kleikamp
2013-01-30 19:23 ` Jeff Moyer
2013-01-30 19:26 ` Dave Kleikamp
2013-02-18 21:42 ` Sedat Dilek
2013-02-18 22:14 ` Dave Kleikamp
2013-01-29 23:38 ` [PATCH V6 18/30] fs: add read_iter and write_iter to several file systems Dave Kleikamp
2013-01-30 0:52 ` Dave Kleikamp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359476623-10544-1-git-send-email-dave.kleikamp@oracle.com \
--to=dave.kleikamp@oracle.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mpatlasov@parallels.com \
--cc=viro@zeniv.linux.org.uk \
--cc=zab@zabbo.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).