From: Namjae Jeon <linkinjeon@gmail.com>
To: jaegeuk.kim@samsung.com
Cc: linux-f2fs-devel@lists.sourceforge.net,
linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
Namjae Jeon <linkinjeon@gmail.com>,
Namjae Jeon <namjae.jeon@samsung.com>,
Pankaj Kumar <pankaj.km@samsung.com>
Subject: [PATCH 1/4] f2fs: reorganize the f2fs_setattr() function.
Date: Sat, 8 Jun 2013 21:25:03 +0900 [thread overview]
Message-ID: <1370694303-2738-1-git-send-email-linkinjeon@gmail.com> (raw)
From: Namjae Jeon <namjae.jeon@samsung.com>
Remove the redundant code from this function and make it aligned with
usages of latest generic vfs layer function e.g using the setattr_copy()
instead of using the f2fs specific function.
Also correct the condition for updating the size of file via
truncate_setsize().
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>
---
fs/f2fs/acl.c | 5 +----
fs/f2fs/file.c | 47 +++++------------------------------------------
2 files changed, 6 insertions(+), 46 deletions(-)
diff --git a/fs/f2fs/acl.c b/fs/f2fs/acl.c
index 44abc2f..2d13f44 100644
--- a/fs/f2fs/acl.c
+++ b/fs/f2fs/acl.c
@@ -17,9 +17,6 @@
#include "xattr.h"
#include "acl.h"
-#define get_inode_mode(i) ((is_inode_flag_set(F2FS_I(i), FI_ACL_MODE)) ? \
- (F2FS_I(i)->i_acl_mode) : ((i)->i_mode))
-
static inline size_t f2fs_acl_size(int count)
{
if (count <= 4) {
@@ -299,7 +296,7 @@ int f2fs_acl_chmod(struct inode *inode)
struct f2fs_sb_info *sbi = F2FS_SB(inode->i_sb);
struct posix_acl *acl;
int error;
- umode_t mode = get_inode_mode(inode);
+ umode_t mode = inode->i_mode;
if (!test_opt(sbi, POSIX_ACL))
return 0;
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index deefd25..8dfc1da 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -300,63 +300,26 @@ static int f2fs_getattr(struct vfsmount *mnt,
return 0;
}
-#ifdef CONFIG_F2FS_FS_POSIX_ACL
-static void __setattr_copy(struct inode *inode, const struct iattr *attr)
-{
- struct f2fs_inode_info *fi = F2FS_I(inode);
- unsigned int ia_valid = attr->ia_valid;
-
- if (ia_valid & ATTR_UID)
- inode->i_uid = attr->ia_uid;
- if (ia_valid & ATTR_GID)
- inode->i_gid = attr->ia_gid;
- if (ia_valid & ATTR_ATIME)
- inode->i_atime = timespec_trunc(attr->ia_atime,
- inode->i_sb->s_time_gran);
- if (ia_valid & ATTR_MTIME)
- inode->i_mtime = timespec_trunc(attr->ia_mtime,
- inode->i_sb->s_time_gran);
- if (ia_valid & ATTR_CTIME)
- inode->i_ctime = timespec_trunc(attr->ia_ctime,
- inode->i_sb->s_time_gran);
- if (ia_valid & ATTR_MODE) {
- umode_t mode = attr->ia_mode;
-
- if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID))
- mode &= ~S_ISGID;
- set_acl_inode(fi, mode);
- }
-}
-#else
-#define __setattr_copy setattr_copy
-#endif
-
int f2fs_setattr(struct dentry *dentry, struct iattr *attr)
{
struct inode *inode = dentry->d_inode;
- struct f2fs_inode_info *fi = F2FS_I(inode);
int err;
err = inode_change_ok(inode, attr);
if (err)
return err;
- if ((attr->ia_valid & ATTR_SIZE) &&
- attr->ia_size != i_size_read(inode)) {
- truncate_setsize(inode, attr->ia_size);
+ if ((attr->ia_valid & ATTR_SIZE)) {
+ if (attr->ia_size != i_size_read(inode))
+ truncate_setsize(inode, attr->ia_size);
f2fs_truncate(inode);
f2fs_balance_fs(F2FS_SB(inode->i_sb));
}
- __setattr_copy(inode, attr);
+ setattr_copy(inode, attr);
- if (attr->ia_valid & ATTR_MODE) {
+ if (attr->ia_valid & ATTR_MODE)
err = f2fs_acl_chmod(inode);
- if (err || is_inode_flag_set(fi, FI_ACL_MODE)) {
- inode->i_mode = fi->i_acl_mode;
- clear_inode_flag(fi, FI_ACL_MODE);
- }
- }
mark_inode_dirty(inode);
return err;
--
1.7.9.5
next reply other threads:[~2013-06-08 12:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-08 12:25 Namjae Jeon [this message]
2013-06-10 0:38 ` [f2fs-dev] [PATCH 1/4] f2fs: reorganize the f2fs_setattr() function Changman Lee
2013-06-10 22:57 ` Namjae Jeon
2013-06-11 5:48 ` Changman Lee
2013-06-11 11:30 ` Namjae Jeon
2013-06-14 4:20 ` Namjae Jeon
2013-06-21 4:42 ` Changman Lee
2013-06-21 7:30 ` Namjae Jeon
2013-06-24 2:32 ` Changman Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370694303-2738-1-git-send-email-linkinjeon@gmail.com \
--to=linkinjeon@gmail.com \
--cc=jaegeuk.kim@samsung.com \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=namjae.jeon@samsung.com \
--cc=pankaj.km@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).