From: Matthew Wilcox <matthew.r.wilcox@intel.com>
To: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
linux-fsdevel@vger.kernel.org, willy@linux.intel.com
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Subject: [PATCH v6 12/22] ext2: Remove ext2_xip_verify_sb()
Date: Tue, 25 Feb 2014 09:18:28 -0500 [thread overview]
Message-ID: <1393337918-28265-13-git-send-email-matthew.r.wilcox@intel.com> (raw)
In-Reply-To: <1393337918-28265-1-git-send-email-matthew.r.wilcox@intel.com>
Jan Kara pointed out that calling ext2_xip_verify_sb() in ext2_remount()
doesn't make sense, since changing the XIP option on remount isn't
allowed. It also doesn't make sense to re-check whether blocksize is
supported since it can't change between mounts.
Replace the call to ext2_xip_verify_sb() in ext2_fill_super() with the
equivalent check and delete the definition.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
---
fs/ext2/super.c | 33 ++++++++++++---------------------
fs/ext2/xip.c | 12 ------------
fs/ext2/xip.h | 2 --
3 files changed, 12 insertions(+), 35 deletions(-)
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 20d6697..3a1db39 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -868,9 +868,6 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent)
((EXT2_SB(sb)->s_mount_opt & EXT2_MOUNT_POSIX_ACL) ?
MS_POSIXACL : 0);
- ext2_xip_verify_sb(sb); /* see if bdev supports xip, unset
- EXT2_MOUNT_XIP if not */
-
if (le32_to_cpu(es->s_rev_level) == EXT2_GOOD_OLD_REV &&
(EXT2_HAS_COMPAT_FEATURE(sb, ~0U) ||
EXT2_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
@@ -900,11 +897,17 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent)
blocksize = BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size);
- if (ext2_use_xip(sb) && blocksize != PAGE_SIZE) {
- if (!silent)
+ if (sbi->s_mount_opt & EXT2_MOUNT_XIP) {
+ if (blocksize != PAGE_SIZE) {
ext2_msg(sb, KERN_ERR,
- "error: unsupported blocksize for xip");
- goto failed_mount;
+ "error: unsupported blocksize for xip");
+ goto failed_mount;
+ }
+ if (!sb->s_bdev->bd_disk->fops->direct_access) {
+ ext2_msg(sb, KERN_ERR,
+ "error: device does not support xip");
+ goto failed_mount;
+ }
}
/* If the blocksize doesn't match, re-read the thing.. */
@@ -1249,7 +1252,6 @@ static int ext2_remount (struct super_block * sb, int * flags, char * data)
{
struct ext2_sb_info * sbi = EXT2_SB(sb);
struct ext2_super_block * es;
- unsigned long old_mount_opt = sbi->s_mount_opt;
struct ext2_mount_options old_opts;
unsigned long old_sb_flags;
int err;
@@ -1273,22 +1275,11 @@ static int ext2_remount (struct super_block * sb, int * flags, char * data)
sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
((sbi->s_mount_opt & EXT2_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
- ext2_xip_verify_sb(sb); /* see if bdev supports xip, unset
- EXT2_MOUNT_XIP if not */
-
- if ((ext2_use_xip(sb)) && (sb->s_blocksize != PAGE_SIZE)) {
- ext2_msg(sb, KERN_WARNING,
- "warning: unsupported blocksize for xip");
- err = -EINVAL;
- goto restore_opts;
- }
-
es = sbi->s_es;
- if ((sbi->s_mount_opt ^ old_mount_opt) & EXT2_MOUNT_XIP) {
+ if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT2_MOUNT_XIP) {
ext2_msg(sb, KERN_WARNING, "warning: refusing change of "
"xip flag with busy inodes while remounting");
- sbi->s_mount_opt &= ~EXT2_MOUNT_XIP;
- sbi->s_mount_opt |= old_mount_opt & EXT2_MOUNT_XIP;
+ sbi->s_mount_opt ^= EXT2_MOUNT_XIP;
}
if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
spin_unlock(&sbi->s_lock);
diff --git a/fs/ext2/xip.c b/fs/ext2/xip.c
index 132d4da..66ca113 100644
--- a/fs/ext2/xip.c
+++ b/fs/ext2/xip.c
@@ -13,15 +13,3 @@
#include "ext2.h"
#include "xip.h"
-void ext2_xip_verify_sb(struct super_block *sb)
-{
- struct ext2_sb_info *sbi = EXT2_SB(sb);
-
- if ((sbi->s_mount_opt & EXT2_MOUNT_XIP) &&
- !sb->s_bdev->bd_disk->fops->direct_access) {
- sbi->s_mount_opt &= (~EXT2_MOUNT_XIP);
- ext2_msg(sb, KERN_WARNING,
- "warning: ignoring xip option - "
- "not supported by bdev");
- }
-}
diff --git a/fs/ext2/xip.h b/fs/ext2/xip.h
index e7b9f0a..87eeb04 100644
--- a/fs/ext2/xip.h
+++ b/fs/ext2/xip.h
@@ -6,13 +6,11 @@
*/
#ifdef CONFIG_EXT2_FS_XIP
-extern void ext2_xip_verify_sb (struct super_block *);
static inline int ext2_use_xip (struct super_block *sb)
{
struct ext2_sb_info *sbi = EXT2_SB(sb);
return (sbi->s_mount_opt & EXT2_MOUNT_XIP);
}
#else
-#define ext2_xip_verify_sb(sb) do { } while (0)
#define ext2_use_xip(sb) 0
#endif
--
1.8.5.3
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-02-25 14:18 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-25 14:18 [PATCH v6 00/22] Support ext4 on NV-DIMMs Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 01/22] Fix XIP fault vs truncate race Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 02/22] Allow page fault handlers to perform the COW Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 03/22] axonram: Fix bug in direct_access Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 04/22] Change direct_access calling convention Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 05/22] Introduce IS_DAX(inode) Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 06/22] Replace XIP read and write with DAX I/O Matthew Wilcox
2014-03-11 0:32 ` Toshi Kani
2014-03-11 12:53 ` Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 07/22] Replace the XIP page fault handler with the DAX page fault handler Matthew Wilcox
2014-02-28 17:49 ` Toshi Kani
2014-02-28 20:20 ` Matthew Wilcox
2014-02-28 22:18 ` Toshi Kani
2014-03-02 23:30 ` Dave Chinner
2014-03-03 23:07 ` Ross Zwisler
2014-03-04 0:56 ` Dave Chinner
2014-03-20 19:38 ` Matthew Wilcox
2014-03-20 23:55 ` Dave Chinner
2014-02-25 14:18 ` [PATCH v6 08/22] Replace xip_truncate_page with dax_truncate_page Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 09/22] Remove mm/filemap_xip.c Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 10/22] Remove get_xip_mem Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 11/22] Replace ext2_clear_xip_target with dax_clear_blocks Matthew Wilcox
2014-02-25 14:18 ` Matthew Wilcox [this message]
2014-02-25 14:18 ` [PATCH v6 13/22] ext2: Remove ext2_use_xip Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 14/22] ext2: Remove xip.c and xip.h Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 15/22] Remove CONFIG_EXT2_FS_XIP and rename CONFIG_FS_XIP to CONFIG_FS_DAX Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 16/22] ext2: Remove ext2_aops_xip Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 17/22] Get rid of most mentions of XIP in ext2 Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 18/22] xip: Add xip_zero_page_range Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 19/22] ext4: Make ext4_block_zero_page_range static Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 20/22] ext4: Add DAX functionality Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 21/22] ext4: Fix typos Matthew Wilcox
2014-02-25 14:18 ` [PATCH v6 22/22] dax: Add reporting of major faults Matthew Wilcox
2014-02-26 15:07 ` [PATCH v6 23/22] Bugfixes Matthew Wilcox
2014-02-27 14:01 ` [PATCH v6 00/22] Support ext4 on NV-DIMMs Florian Weimer
2014-02-27 16:29 ` Matthew Wilcox
2014-02-27 16:36 ` Florian Weimer
2014-03-02 8:22 ` Pavel Machek
[not found] ` <CF4DEE22.25C8F%matthew.r.wilcox@intel.com>
2014-03-18 18:45 ` [PATCH v6 20/22] ext4: Add DAX functionality Ross Zwisler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393337918-28265-13-git-send-email-matthew.r.wilcox@intel.com \
--to=matthew.r.wilcox@intel.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=willy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).