From: Mel Gorman <mgorman@suse.de>
To: Linux-MM <linux-mm@kvack.org>,
Linux-FSDevel <linux-fsdevel@vger.kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>,
Vlastimil Babka <vbabka@suse.cz>, Jan Kara <jack@suse.cz>,
Michal Hocko <mhocko@suse.cz>, Hugh Dickins <hughd@google.com>,
Mel Gorman <mgorman@suse.de>,
Linux Kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH 07/17] mm: page_alloc: Take the ALLOC_NO_WATERMARK check out of the fast path
Date: Thu, 1 May 2014 09:44:38 +0100 [thread overview]
Message-ID: <1398933888-4940-8-git-send-email-mgorman@suse.de> (raw)
In-Reply-To: <1398933888-4940-1-git-send-email-mgorman@suse.de>
ALLOC_NO_WATERMARK is set in a few cases. Always by kswapd, always for
__GFP_MEMALLOC, sometimes for swap-over-nfs, tasks etc. Each of these cases
are relatively rare events but the ALLOC_NO_WATERMARK check is an unlikely
branch in the fast path. This patch moves the check out of the fast path
and after it has been determined that the watermarks have not been met. This
helps the common fast path at the cost of making the slow path slower and
hitting kswapd with a performance cost. It's a reasonable tradeoff.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
---
mm/page_alloc.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 2e576fd..dc123ff 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1944,9 +1944,6 @@ zonelist_scan:
(alloc_flags & ALLOC_CPUSET) &&
!cpuset_zone_allowed_softwall(zone, gfp_mask))
continue;
- BUILD_BUG_ON(ALLOC_NO_WATERMARKS < NR_WMARK);
- if (unlikely(alloc_flags & ALLOC_NO_WATERMARKS))
- goto try_this_zone;
/*
* Distribute pages in proportion to the individual
* zone size to ensure fair page aging. The zone a
@@ -1993,6 +1990,11 @@ zonelist_scan:
classzone_idx, alloc_flags)) {
int ret;
+ /* Checked here to keep the fast path fast */
+ BUILD_BUG_ON(ALLOC_NO_WATERMARKS < NR_WMARK);
+ if (alloc_flags & ALLOC_NO_WATERMARKS)
+ goto try_this_zone;
+
if (IS_ENABLED(CONFIG_NUMA) &&
!did_zlc_setup && nr_online_nodes > 1) {
/*
--
1.8.4.5
next prev parent reply other threads:[~2014-05-01 8:44 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-01 8:44 [PATCH 00/17] Misc page alloc, shmem, mark_page_accessed and page_waitqueue optimisations Mel Gorman
2014-05-01 8:44 ` [PATCH 01/17] mm: page_alloc: Do not update zlc unless the zlc is active Mel Gorman
2014-05-01 13:25 ` Johannes Weiner
2014-05-06 15:04 ` Rik van Riel
2014-05-01 8:44 ` [PATCH 02/17] mm: page_alloc: Do not treat a zone that cannot be used for dirty pages as "full" Mel Gorman
2014-05-06 15:09 ` Rik van Riel
2014-05-01 8:44 ` [PATCH 03/17] mm: page_alloc: Use jump labels to avoid checking number_of_cpusets Mel Gorman
2014-05-06 15:10 ` Rik van Riel
2014-05-06 20:23 ` Peter Zijlstra
2014-05-06 22:21 ` Mel Gorman
2014-05-07 9:04 ` Peter Zijlstra
2014-05-07 9:43 ` Mel Gorman
2014-05-01 8:44 ` [PATCH 04/17] mm: page_alloc: Calculate classzone_idx once from the zonelist ref Mel Gorman
2014-05-06 16:01 ` Rik van Riel
2014-05-01 8:44 ` [PATCH 05/17] mm: page_alloc: Only check the zone id check if pages are buddies Mel Gorman
2014-05-06 16:48 ` Rik van Riel
2014-05-01 8:44 ` [PATCH 06/17] mm: page_alloc: Only check the alloc flags and gfp_mask for dirty once Mel Gorman
2014-05-06 17:24 ` Rik van Riel
2014-05-01 8:44 ` Mel Gorman [this message]
2014-05-06 17:25 ` [PATCH 07/17] mm: page_alloc: Take the ALLOC_NO_WATERMARK check out of the fast path Rik van Riel
2014-05-01 8:44 ` [PATCH 08/17] mm: page_alloc: Use word-based accesses for get/set pageblock bitmaps Mel Gorman
2014-05-02 22:34 ` Sasha Levin
2014-05-04 13:14 ` Mel Gorman
2014-05-05 12:40 ` Vlastimil Babka
2014-05-06 9:13 ` Mel Gorman
2014-05-06 14:42 ` Vlastimil Babka
2014-05-06 15:12 ` Mel Gorman
2014-05-06 20:34 ` Peter Zijlstra
2014-05-06 22:24 ` Mel Gorman
2014-05-01 8:44 ` [PATCH 09/17] mm: page_alloc: Reduce number of times page_to_pfn is called Mel Gorman
2014-05-06 18:47 ` Rik van Riel
2014-05-01 8:44 ` [PATCH 10/17] mm: page_alloc: Lookup pageblock migratetype with IRQs enabled during free Mel Gorman
2014-05-06 18:48 ` Rik van Riel
2014-05-01 8:44 ` [PATCH 11/17] mm: page_alloc: Use unsigned int for order in more places Mel Gorman
2014-05-01 14:35 ` Dave Hansen
2014-05-01 15:11 ` Mel Gorman
2014-05-01 15:38 ` Dave Hansen
2014-05-06 18:49 ` Rik van Riel
2014-05-01 8:44 ` [PATCH 12/17] mm: page_alloc: Convert hot/cold parameter and immediate callers to bool Mel Gorman
2014-05-06 18:49 ` Rik van Riel
2014-05-01 8:44 ` [PATCH 13/17] mm: shmem: Avoid atomic operation during shmem_getpage_gfp Mel Gorman
2014-05-06 18:53 ` Rik van Riel
2014-05-01 8:44 ` [PATCH 14/17] mm: Do not use atomic operations when releasing pages Mel Gorman
2014-05-01 13:29 ` Johannes Weiner
2014-05-01 13:39 ` Mel Gorman
2014-05-01 13:47 ` Johannes Weiner
2014-05-06 18:54 ` Rik van Riel
2014-05-01 8:44 ` [PATCH 15/17] mm: Do not use unnecessary atomic operations when adding pages to the LRU Mel Gorman
2014-05-01 13:33 ` Johannes Weiner
2014-05-01 13:40 ` Mel Gorman
2014-05-06 15:30 ` Vlastimil Babka
2014-05-06 15:55 ` Mel Gorman
2014-05-01 8:44 ` [PATCH 16/17] mm: Non-atomically mark page accessed during page cache allocation where possible Mel Gorman
2014-05-01 8:44 ` [PATCH 17/17] mm: filemap: Avoid unnecessary barries and waitqueue lookup in unlock_page fastpath Mel Gorman
2014-05-05 10:50 ` Jan Kara
2014-05-07 9:03 ` Mel Gorman
2014-05-06 20:30 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398933888-4940-8-git-send-email-mgorman@suse.de \
--to=mgorman@suse.de \
--cc=hannes@cmpxchg.org \
--cc=hughd@google.com \
--cc=jack@suse.cz \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.cz \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).