From: Jan Kara <jack@suse.cz>
To: linux-fsdevel@vger.kernel.org
Cc: Jan Kara <jack@suse.cz>,
linux-ext4@vger.kernel.org, "Theodore Ts'o" <tytso@mit.edu>
Subject: [PATCH 2/5] ext4: Don't use MAXQUOTAS value
Date: Wed, 10 Sep 2014 21:22:49 +0200 [thread overview]
Message-ID: <1410376972-18417-3-git-send-email-jack@suse.cz> (raw)
In-Reply-To: <1410376972-18417-1-git-send-email-jack@suse.cz>
MAXQUOTAS value defines maximum number of quota types VFS supports.
This isn't necessarily the number of types ext4 supports. Although ext4
will support project quotas, use ext4 private definition for consistency
with other filesystems.
CC: linux-ext4@vger.kernel.org
CC: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
---
fs/ext4/ext4.h | 5 ++++-
fs/ext4/ext4_jbd2.h | 6 +++---
fs/ext4/super.c | 22 +++++++++++-----------
3 files changed, 18 insertions(+), 15 deletions(-)
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index b0c225cdb52c..1da22717ecdb 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1174,6 +1174,9 @@ struct ext4_super_block {
#define EXT4_MF_MNTDIR_SAMPLED 0x0001
#define EXT4_MF_FS_ABORTED 0x0002 /* Fatal error detected */
+/* Number of quota types we support */
+#define EXT4_MAXQUOTAS 2
+
/*
* fourth extended-fs super-block data in memory
*/
@@ -1237,7 +1240,7 @@ struct ext4_sb_info {
u32 s_min_batch_time;
struct block_device *journal_bdev;
#ifdef CONFIG_QUOTA
- char *s_qf_names[MAXQUOTAS]; /* Names of quota files with journalled quota */
+ char *s_qf_names[EXT4_MAXQUOTAS]; /* Names of quota files with journalled quota */
int s_jquota_fmt; /* Format of quota to use */
#endif
unsigned int s_want_extra_isize; /* New inodes should reserve # bytes */
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index 17c00ff202f2..9c5b49fb281e 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -102,9 +102,9 @@
#define EXT4_QUOTA_INIT_BLOCKS(sb) 0
#define EXT4_QUOTA_DEL_BLOCKS(sb) 0
#endif
-#define EXT4_MAXQUOTAS_TRANS_BLOCKS(sb) (MAXQUOTAS*EXT4_QUOTA_TRANS_BLOCKS(sb))
-#define EXT4_MAXQUOTAS_INIT_BLOCKS(sb) (MAXQUOTAS*EXT4_QUOTA_INIT_BLOCKS(sb))
-#define EXT4_MAXQUOTAS_DEL_BLOCKS(sb) (MAXQUOTAS*EXT4_QUOTA_DEL_BLOCKS(sb))
+#define EXT4_MAXQUOTAS_TRANS_BLOCKS(sb) (EXT4_MAXQUOTAS*EXT4_QUOTA_TRANS_BLOCKS(sb))
+#define EXT4_MAXQUOTAS_INIT_BLOCKS(sb) (EXT4_MAXQUOTAS*EXT4_QUOTA_INIT_BLOCKS(sb))
+#define EXT4_MAXQUOTAS_DEL_BLOCKS(sb) (EXT4_MAXQUOTAS*EXT4_QUOTA_DEL_BLOCKS(sb))
static inline int ext4_jbd2_credits_xattr(struct inode *inode)
{
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 0b28b36e7915..baa73b798f8b 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -823,7 +823,7 @@ static void ext4_put_super(struct super_block *sb)
percpu_counter_destroy(&sbi->s_extent_cache_cnt);
brelse(sbi->s_sbh);
#ifdef CONFIG_QUOTA
- for (i = 0; i < MAXQUOTAS; i++)
+ for (i = 0; i < EXT4_MAXQUOTAS; i++)
kfree(sbi->s_qf_names[i]);
#endif
@@ -2207,7 +2207,7 @@ static void ext4_orphan_cleanup(struct super_block *sb,
/* Needed for iput() to work correctly and not trash data */
sb->s_flags |= MS_ACTIVE;
/* Turn on quotas so that they are updated correctly */
- for (i = 0; i < MAXQUOTAS; i++) {
+ for (i = 0; i < EXT4_MAXQUOTAS; i++) {
if (EXT4_SB(sb)->s_qf_names[i]) {
int ret = ext4_quota_on_mount(sb, i);
if (ret < 0)
@@ -2263,7 +2263,7 @@ static void ext4_orphan_cleanup(struct super_block *sb,
PLURAL(nr_truncates));
#ifdef CONFIG_QUOTA
/* Turn quotas off */
- for (i = 0; i < MAXQUOTAS; i++) {
+ for (i = 0; i < EXT4_MAXQUOTAS; i++) {
if (sb_dqopt(sb)->files[i])
dquot_quota_off(sb, i);
}
@@ -4243,7 +4243,7 @@ failed_mount:
remove_proc_entry(sb->s_id, ext4_proc_root);
}
#ifdef CONFIG_QUOTA
- for (i = 0; i < MAXQUOTAS; i++)
+ for (i = 0; i < EXT4_MAXQUOTAS; i++)
kfree(sbi->s_qf_names[i]);
#endif
ext4_blkdev_remove(sbi);
@@ -4770,7 +4770,7 @@ struct ext4_mount_options {
u32 s_min_batch_time, s_max_batch_time;
#ifdef CONFIG_QUOTA
int s_jquota_fmt;
- char *s_qf_names[MAXQUOTAS];
+ char *s_qf_names[EXT4_MAXQUOTAS];
#endif
};
@@ -4800,7 +4800,7 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
old_opts.s_max_batch_time = sbi->s_max_batch_time;
#ifdef CONFIG_QUOTA
old_opts.s_jquota_fmt = sbi->s_jquota_fmt;
- for (i = 0; i < MAXQUOTAS; i++)
+ for (i = 0; i < EXT4_MAXQUOTAS; i++)
if (sbi->s_qf_names[i]) {
old_opts.s_qf_names[i] = kstrdup(sbi->s_qf_names[i],
GFP_KERNEL);
@@ -4961,7 +4961,7 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
#ifdef CONFIG_QUOTA
/* Release old quota file names */
- for (i = 0; i < MAXQUOTAS; i++)
+ for (i = 0; i < EXT4_MAXQUOTAS; i++)
kfree(old_opts.s_qf_names[i]);
if (enable_quota) {
if (sb_any_quota_suspended(sb))
@@ -4990,7 +4990,7 @@ restore_opts:
sbi->s_max_batch_time = old_opts.s_max_batch_time;
#ifdef CONFIG_QUOTA
sbi->s_jquota_fmt = old_opts.s_jquota_fmt;
- for (i = 0; i < MAXQUOTAS; i++) {
+ for (i = 0; i < EXT4_MAXQUOTAS; i++) {
kfree(sbi->s_qf_names[i]);
sbi->s_qf_names[i] = old_opts.s_qf_names[i];
}
@@ -5193,7 +5193,7 @@ static int ext4_quota_enable(struct super_block *sb, int type, int format_id,
{
int err;
struct inode *qf_inode;
- unsigned long qf_inums[MAXQUOTAS] = {
+ unsigned long qf_inums[EXT4_MAXQUOTAS] = {
le32_to_cpu(EXT4_SB(sb)->s_es->s_usr_quota_inum),
le32_to_cpu(EXT4_SB(sb)->s_es->s_grp_quota_inum)
};
@@ -5221,13 +5221,13 @@ static int ext4_quota_enable(struct super_block *sb, int type, int format_id,
static int ext4_enable_quotas(struct super_block *sb)
{
int type, err = 0;
- unsigned long qf_inums[MAXQUOTAS] = {
+ unsigned long qf_inums[EXT4_MAXQUOTAS] = {
le32_to_cpu(EXT4_SB(sb)->s_es->s_usr_quota_inum),
le32_to_cpu(EXT4_SB(sb)->s_es->s_grp_quota_inum)
};
sb_dqopt(sb)->flags |= DQUOT_QUOTA_SYS_FILE;
- for (type = 0; type < MAXQUOTAS; type++) {
+ for (type = 0; type < EXT4_MAXQUOTAS; type++) {
if (qf_inums[type]) {
err = ext4_quota_enable(sb, type, QFMT_VFS_V1,
DQUOT_USAGE_ENABLED);
--
1.8.1.4
next prev parent reply other threads:[~2014-09-10 19:23 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-10 19:22 [PATCH 0/5] Remove MAXQUOTAS usage from filesystems Jan Kara
2014-09-10 19:22 ` [PATCH 1/5] ext3: Don't use MAXQUOTAS value Jan Kara
2014-09-10 19:22 ` Jan Kara [this message]
2014-09-11 15:16 ` [PATCH 2/5] ext4: " Theodore Ts'o
2014-09-10 19:22 ` [PATCH 3/5] reiserfs: " Jan Kara
2014-09-21 11:09 ` Jeff Mahoney
2014-09-10 19:22 ` [PATCH 4/5] gfs2: " Jan Kara
2014-09-11 12:41 ` Steven Whitehouse
2014-09-10 19:22 ` [PATCH 5/5] ocfs2: " Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410376972-18417-3-git-send-email-jack@suse.cz \
--to=jack@suse.cz \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).