From: Matthew Wilcox <matthew.r.wilcox@intel.com>
To: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mm@kvack.org
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>,
willy@linux.intel.com, Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH v12 12/20] ext2: Remove ext2_xip_verify_sb()
Date: Fri, 24 Oct 2014 17:20:44 -0400 [thread overview]
Message-ID: <1414185652-28663-13-git-send-email-matthew.r.wilcox@intel.com> (raw)
In-Reply-To: <1414185652-28663-1-git-send-email-matthew.r.wilcox@intel.com>
Jan Kara pointed out that calling ext2_xip_verify_sb() in ext2_remount()
doesn't make sense, since changing the XIP option on remount isn't
allowed. It also doesn't make sense to re-check whether blocksize is
supported since it can't change between mounts.
Replace the call to ext2_xip_verify_sb() in ext2_fill_super() with the
equivalent check and delete the definition.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
---
fs/ext2/super.c | 33 ++++++++++++---------------------
fs/ext2/xip.c | 12 ------------
fs/ext2/xip.h | 2 --
3 files changed, 12 insertions(+), 35 deletions(-)
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 170dc41..f975854 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -868,9 +868,6 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent)
((EXT2_SB(sb)->s_mount_opt & EXT2_MOUNT_POSIX_ACL) ?
MS_POSIXACL : 0);
- ext2_xip_verify_sb(sb); /* see if bdev supports xip, unset
- EXT2_MOUNT_XIP if not */
-
if (le32_to_cpu(es->s_rev_level) == EXT2_GOOD_OLD_REV &&
(EXT2_HAS_COMPAT_FEATURE(sb, ~0U) ||
EXT2_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
@@ -900,11 +897,17 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent)
blocksize = BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size);
- if (ext2_use_xip(sb) && blocksize != PAGE_SIZE) {
- if (!silent)
+ if (sbi->s_mount_opt & EXT2_MOUNT_XIP) {
+ if (blocksize != PAGE_SIZE) {
ext2_msg(sb, KERN_ERR,
- "error: unsupported blocksize for xip");
- goto failed_mount;
+ "error: unsupported blocksize for xip");
+ goto failed_mount;
+ }
+ if (!sb->s_bdev->bd_disk->fops->direct_access) {
+ ext2_msg(sb, KERN_ERR,
+ "error: device does not support xip");
+ goto failed_mount;
+ }
}
/* If the blocksize doesn't match, re-read the thing.. */
@@ -1249,7 +1252,6 @@ static int ext2_remount (struct super_block * sb, int * flags, char * data)
{
struct ext2_sb_info * sbi = EXT2_SB(sb);
struct ext2_super_block * es;
- unsigned long old_mount_opt = sbi->s_mount_opt;
struct ext2_mount_options old_opts;
unsigned long old_sb_flags;
int err;
@@ -1274,22 +1276,11 @@ static int ext2_remount (struct super_block * sb, int * flags, char * data)
sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
((sbi->s_mount_opt & EXT2_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
- ext2_xip_verify_sb(sb); /* see if bdev supports xip, unset
- EXT2_MOUNT_XIP if not */
-
- if ((ext2_use_xip(sb)) && (sb->s_blocksize != PAGE_SIZE)) {
- ext2_msg(sb, KERN_WARNING,
- "warning: unsupported blocksize for xip");
- err = -EINVAL;
- goto restore_opts;
- }
-
es = sbi->s_es;
- if ((sbi->s_mount_opt ^ old_mount_opt) & EXT2_MOUNT_XIP) {
+ if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT2_MOUNT_XIP) {
ext2_msg(sb, KERN_WARNING, "warning: refusing change of "
"xip flag with busy inodes while remounting");
- sbi->s_mount_opt &= ~EXT2_MOUNT_XIP;
- sbi->s_mount_opt |= old_mount_opt & EXT2_MOUNT_XIP;
+ sbi->s_mount_opt ^= EXT2_MOUNT_XIP;
}
if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
spin_unlock(&sbi->s_lock);
diff --git a/fs/ext2/xip.c b/fs/ext2/xip.c
index 132d4da..66ca113 100644
--- a/fs/ext2/xip.c
+++ b/fs/ext2/xip.c
@@ -13,15 +13,3 @@
#include "ext2.h"
#include "xip.h"
-void ext2_xip_verify_sb(struct super_block *sb)
-{
- struct ext2_sb_info *sbi = EXT2_SB(sb);
-
- if ((sbi->s_mount_opt & EXT2_MOUNT_XIP) &&
- !sb->s_bdev->bd_disk->fops->direct_access) {
- sbi->s_mount_opt &= (~EXT2_MOUNT_XIP);
- ext2_msg(sb, KERN_WARNING,
- "warning: ignoring xip option - "
- "not supported by bdev");
- }
-}
diff --git a/fs/ext2/xip.h b/fs/ext2/xip.h
index e7b9f0a..87eeb04 100644
--- a/fs/ext2/xip.h
+++ b/fs/ext2/xip.h
@@ -6,13 +6,11 @@
*/
#ifdef CONFIG_EXT2_FS_XIP
-extern void ext2_xip_verify_sb (struct super_block *);
static inline int ext2_use_xip (struct super_block *sb)
{
struct ext2_sb_info *sbi = EXT2_SB(sb);
return (sbi->s_mount_opt & EXT2_MOUNT_XIP);
}
#else
-#define ext2_xip_verify_sb(sb) do { } while (0)
#define ext2_use_xip(sb) 0
#endif
--
2.1.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-10-24 21:20 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-24 21:20 [PATCH v12 00/20] DAX: Page cache bypass for filesystems on memory storage Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 01/20] axonram: Fix bug in direct_access Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 02/20] block: Change direct_access calling convention Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 03/20] mm: Fix XIP fault vs truncate race Matthew Wilcox
2015-01-12 23:09 ` Andrew Morton
2015-01-13 18:50 ` Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 04/20] mm: Allow page fault handlers to perform the COW Matthew Wilcox
2015-01-12 23:09 ` Andrew Morton
2015-01-13 18:58 ` Matthew Wilcox
2015-02-05 9:16 ` Yigal Korman
2015-02-05 21:39 ` Matthew Wilcox
2015-02-08 11:48 ` Yigal Korman
2014-10-24 21:20 ` [PATCH v12 05/20] vfs,ext2: Introduce IS_DAX(inode) Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 06/20] dax,ext2: Replace XIP read and write with DAX I/O Matthew Wilcox
2015-01-12 23:09 ` Andrew Morton
2015-01-13 20:59 ` Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 07/20] dax,ext2: Replace ext2_clear_xip_target with dax_clear_blocks Matthew Wilcox
2015-01-12 23:09 ` Andrew Morton
2015-01-13 21:39 ` Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 08/20] dax,ext2: Replace the XIP page fault handler with the DAX page fault handler Matthew Wilcox
2015-01-12 23:09 ` Andrew Morton
2015-01-13 21:53 ` Matthew Wilcox
2015-01-13 22:47 ` Andrew Morton
2014-10-24 21:20 ` [PATCH v12 09/20] dax,ext2: Replace xip_truncate_page with dax_truncate_page Matthew Wilcox
2015-01-12 23:09 ` Andrew Morton
2015-01-13 21:55 ` Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 10/20] dax: Replace XIP documentation with DAX documentation Matthew Wilcox
2015-01-12 23:10 ` Andrew Morton
2016-01-21 18:38 ` Jared Hulbert
2016-01-22 13:07 ` Wilcox, Matthew R
2016-01-22 13:48 ` Chris Brandt
2016-01-22 14:39 ` Matthew Wilcox
2016-01-24 9:03 ` Jared Hulbert
2016-01-25 16:52 ` Matthew Wilcox
2016-01-25 21:18 ` Jared Hulbert
2016-01-27 19:51 ` Jared Hulbert
2014-10-24 21:20 ` [PATCH v12 11/20] vfs: Remove get_xip_mem Matthew Wilcox
2014-10-24 21:20 ` Matthew Wilcox [this message]
2014-10-24 21:20 ` [PATCH v12 13/20] ext2: Remove ext2_use_xip Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 14/20] ext2: Remove xip.c and xip.h Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 15/20] vfs,ext2: Remove CONFIG_EXT2_FS_XIP and rename CONFIG_FS_XIP to CONFIG_FS_DAX Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 16/20] ext2: Remove ext2_aops_xip Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 17/20] ext2: Get rid of most mentions of XIP in ext2 Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 18/20] dax: Add dax_zero_page_range Matthew Wilcox
2015-01-12 23:10 ` Andrew Morton
2015-01-12 23:20 ` Ross Zwisler
2014-10-24 21:20 ` [PATCH v12 19/20] ext4: Add DAX functionality Matthew Wilcox
2014-10-24 21:20 ` [PATCH v12 20/20] brd: Rename XIP to DAX Matthew Wilcox
2014-12-10 14:03 ` [PATCH v12 00/20] DAX: Page cache bypass for filesystems on memory storage Christoph Hellwig
2014-12-10 14:12 ` Matthew Wilcox
2014-12-10 14:28 ` Jeff Moyer
2014-12-10 20:53 ` Dave Chinner
2015-01-05 18:41 ` Christoph Hellwig
2015-01-06 8:47 ` Andrew Morton
2015-01-08 11:49 ` pread2/ pwrite2 Christoph Hellwig
2015-01-09 19:30 ` Steve French
2015-01-08 16:27 ` [PATCH v12 00/20] DAX: Page cache bypass for filesystems on memory storage Milosz Tanski
2015-01-08 16:28 ` Milosz Tanski
2015-01-08 17:36 ` Jeremy Allison
2015-01-12 14:47 ` Matthew Wilcox
2015-01-12 23:09 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414185652-28663-13-git-send-email-matthew.r.wilcox@intel.com \
--to=matthew.r.wilcox@intel.com \
--cc=akpm@linux-foundation.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=willy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).