From: Jaegeuk Kim <jaegeuk@kernel.org>
To: linux-kernel@vger.kernel.org, linux-fsdevel@vger.kernel.org,
linux-f2fs-devel@lists.sourceforge.net
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Subject: [PATCH 3/5] f2fs: control the memory footprint used by ino entries
Date: Sat, 8 Nov 2014 23:36:07 -0800 [thread overview]
Message-ID: <1415518569-20626-3-git-send-email-jaegeuk@kernel.org> (raw)
In-Reply-To: <1415518569-20626-1-git-send-email-jaegeuk@kernel.org>
This patch adds to control the memory footprint used by ino entries.
This will conduct best effort, not strictly.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
---
fs/f2fs/node.c | 28 ++++++++++++++++++++++------
fs/f2fs/node.h | 3 ++-
fs/f2fs/segment.c | 3 ++-
3 files changed, 26 insertions(+), 8 deletions(-)
diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index 44b8afe..4ea2c47 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -31,22 +31,38 @@ bool available_free_memory(struct f2fs_sb_info *sbi, int type)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct sysinfo val;
+ unsigned long avail_ram;
unsigned long mem_size = 0;
bool res = false;
si_meminfo(&val);
- /* give 25%, 25%, 50% memory for each components respectively */
+
+ /* only uses low memory */
+ avail_ram = val.totalram - val.totalhigh;
+
+ /* give 25%, 25%, 50%, 50% memory for each components respectively */
if (type == FREE_NIDS) {
- mem_size = (nm_i->fcnt * sizeof(struct free_nid)) >> 12;
- res = mem_size < ((val.totalram * nm_i->ram_thresh / 100) >> 2);
+ mem_size = (nm_i->fcnt * sizeof(struct free_nid)) >>
+ PAGE_CACHE_SHIFT;
+ res = mem_size < ((avail_ram * nm_i->ram_thresh / 100) >> 2);
} else if (type == NAT_ENTRIES) {
- mem_size = (nm_i->nat_cnt * sizeof(struct nat_entry)) >> 12;
- res = mem_size < ((val.totalram * nm_i->ram_thresh / 100) >> 2);
+ mem_size = (nm_i->nat_cnt * sizeof(struct nat_entry)) >>
+ PAGE_CACHE_SHIFT;
+ res = mem_size < ((avail_ram * nm_i->ram_thresh / 100) >> 2);
} else if (type == DIRTY_DENTS) {
if (sbi->sb->s_bdi->dirty_exceeded)
return false;
mem_size = get_pages(sbi, F2FS_DIRTY_DENTS);
- res = mem_size < ((val.totalram * nm_i->ram_thresh / 100) >> 1);
+ res = mem_size < ((avail_ram * nm_i->ram_thresh / 100) >> 1);
+ } else if (type == INO_ENTRIES) {
+ int i;
+
+ if (sbi->sb->s_bdi->dirty_exceeded)
+ return false;
+ for (i = 0; i <= UPDATE_INO; i++)
+ mem_size += (sbi->ino_num[i] * sizeof(struct ino_entry))
+ >> PAGE_CACHE_SHIFT;
+ res = mem_size < ((avail_ram * nm_i->ram_thresh / 100) >> 1);
}
return res;
}
diff --git a/fs/f2fs/node.h b/fs/f2fs/node.h
index acb71e5..d10b644 100644
--- a/fs/f2fs/node.h
+++ b/fs/f2fs/node.h
@@ -106,7 +106,8 @@ static inline void raw_nat_from_node_info(struct f2fs_nat_entry *raw_ne,
enum mem_type {
FREE_NIDS, /* indicates the free nid list */
NAT_ENTRIES, /* indicates the cached nat entry */
- DIRTY_DENTS /* indicates dirty dentry pages */
+ DIRTY_DENTS, /* indicates dirty dentry pages */
+ INO_ENTRIES, /* indicates inode entries */
};
struct nat_entry_set {
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 16721b5d..e094675 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -276,7 +276,8 @@ void f2fs_balance_fs_bg(struct f2fs_sb_info *sbi)
{
/* check the # of cached NAT entries and prefree segments */
if (try_to_free_nats(sbi, NAT_ENTRY_PER_BLOCK) ||
- excess_prefree_segs(sbi))
+ excess_prefree_segs(sbi) ||
+ available_free_memory(sbi, INO_ENTRIES))
f2fs_sync_fs(sbi->sb, true);
}
--
2.1.1
------------------------------------------------------------------------------
next prev parent reply other threads:[~2014-11-09 7:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-09 7:36 [PATCH 1/5] f2fs: disable roll-forward when active_logs = 2 Jaegeuk Kim
2014-11-09 7:36 ` [PATCH 2/5] f2fs: introduce the number of inode entries Jaegeuk Kim
2014-11-09 7:36 ` Jaegeuk Kim [this message]
2014-11-10 3:28 ` [f2fs-dev] [PATCH 3/5] f2fs: control the memory footprint used by ino entries Changman Lee
2014-11-10 5:20 ` Jaegeuk Kim
2014-11-09 7:36 ` [PATCH 4/5] f2fs: write node pages if checkpoint is not doing Jaegeuk Kim
2014-11-10 7:37 ` [f2fs-dev] " Changman Lee
2014-11-09 7:36 ` [PATCH 5/5] f2fs: do not skip any writes under memory pressure Jaegeuk Kim
2014-11-10 9:54 ` [f2fs-dev] [PATCH 1/5] f2fs: disable roll-forward when active_logs = 2 Changman Lee
2014-11-10 15:07 ` Jaegeuk Kim
2014-11-11 22:43 ` [f2fs-dev] " Changman Lee
2014-11-14 1:21 ` Jaegeuk Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415518569-20626-3-git-send-email-jaegeuk@kernel.org \
--to=jaegeuk@kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).