From: "Matias Bjørling" <m@bjorling.me>
To: hch@infradead.org, axboe@fb.com, linux-fsdevel@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-nvme@lists.infradead.org
Cc: javier@lightnvm.io, Stephen.Bates@pmcs.com,
keith.busch@intel.com, "Matias Bjørling" <m@bjorling.me>
Subject: [PATCH v4 0/8] Support for Open-Channel SSDs
Date: Fri, 5 Jun 2015 14:54:22 +0200 [thread overview]
Message-ID: <1433508870-28251-1-git-send-email-m@bjorling.me> (raw)
Hi,
This is an updated version based on the feedback from Christoph.
Patch 1-2 are fixes and preparation for the nvme driver. The first fixes
a flag bug. The second allows rq->special in nvme_submit_sync_cmd to
be set and used.
Patch 3 fixes capacity reporting in null_blk.
Patch 4-8 introduces LightNVM and a simple target.
Jens, the patches are on top of your for-next tree.
Development and further information on LightNVM can be found at:
https://github.com/OpenChannelSSD/linux
Changes since v3:
- Remove dependence on REQ_NVM_GC
- Refactor nvme integration to use nvme_submit_sync_cmd for
internal commands.
- Fix race condition bug on multiple threads on RRPC target.
- Rename sysfs entry under the block device from nvm to lightnvm.
The configuration is found in /sys/block/*/lightnvm/
Changes since v2:
Feedback from Paul Bolle:
- Fix license to GPLv2, documentation, compilation.
Feedback from Keith Busch:
- nvme: Move lightnvm out and into nvme-lightnvm.c.
- nvme: Set controller css on lightnvm command set.
- nvme: Remove OACS.
Feedback from Christoph Hellwig:
- lightnvm: Move out of block layer into /drivers/lightnvm/core.c
- lightnvm: refactor request->phys_sector into device drivers.
- lightnvm: refactor prep/unprep into device drivers.
- lightnvm: move nvm_dev from request_queue to gendisk.
New
- Bad block table support (From Javier).
- Update maintainers file.
Changes since v1:
- Splitted LightNVM into two parts. A get/put interface for flash
blocks and the respective targets that implement flash translation
layer logic.
- Updated the patches according to the LightNVM specification changes.
- Added interface to add/remove targets for a block device.
Matias Bjørling (8):
nvme: add special param for nvme_submit_sync_cmd
nvme: don't overwrite req->cmd_flags on sync cmd
null_blk: wrong capacity when bs is not 512 bytes
bio: Introduce LightNVM payload
lightnvm: Support for Open-Channel SSDs
lightnvm: RRPC target
null_blk: LightNVM support
nvme: LightNVM support
Documentation/block/null_blk.txt | 8 +
MAINTAINERS | 9 +
drivers/Kconfig | 2 +
drivers/Makefile | 2 +
drivers/block/Makefile | 2 +-
drivers/block/null_blk.c | 136 ++++-
drivers/block/nvme-core.c | 134 ++++-
drivers/block/nvme-lightnvm.c | 320 +++++++++++
drivers/block/nvme-scsi.c | 4 +-
drivers/lightnvm/Kconfig | 26 +
drivers/lightnvm/Makefile | 6 +
drivers/lightnvm/core.c | 833 +++++++++++++++++++++++++++++
drivers/lightnvm/rrpc.c | 1088 ++++++++++++++++++++++++++++++++++++++
drivers/lightnvm/rrpc.h | 221 ++++++++
include/linux/bio.h | 9 +
include/linux/blk_types.h | 4 +-
include/linux/blkdev.h | 2 +
include/linux/genhd.h | 3 +
include/linux/lightnvm.h | 379 +++++++++++++
include/linux/nvme.h | 11 +-
include/uapi/linux/nvme.h | 131 +++++
21 files changed, 3300 insertions(+), 30 deletions(-)
create mode 100644 drivers/block/nvme-lightnvm.c
create mode 100644 drivers/lightnvm/Kconfig
create mode 100644 drivers/lightnvm/Makefile
create mode 100644 drivers/lightnvm/core.c
create mode 100644 drivers/lightnvm/rrpc.c
create mode 100644 drivers/lightnvm/rrpc.h
create mode 100644 include/linux/lightnvm.h
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-06-05 12:54 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-05 12:54 Matias Bjørling [this message]
2015-06-05 12:54 ` [PATCH v4 1/8] nvme: add special param for nvme_submit_sync_cmd Matias Bjørling
2015-06-05 12:54 ` [PATCH v4 2/8] nvme: don't overwrite req->cmd_flags on sync cmd Matias Bjørling
2015-06-09 7:31 ` Christoph Hellwig
2015-06-05 12:54 ` [PATCH v4 3/8] null_blk: wrong capacity when bs is not 512 bytes Matias Bjørling
2015-06-05 12:54 ` [PATCH v4 4/8] bio: Introduce LightNVM payload Matias Bjørling
2015-06-05 18:17 ` Matias Bjorling
2015-07-06 13:16 ` Pavel Machek
2015-06-05 12:54 ` [PATCH v4 5/8] lightnvm: Support for Open-Channel SSDs Matias Bjørling
2015-06-05 12:54 ` [PATCH v4 6/8] lightnvm: RRPC target Matias Bjørling
2015-06-05 12:54 ` [PATCH v4 7/8] null_blk: LightNVM support Matias Bjørling
2015-06-05 12:54 ` [PATCH v4 8/8] nvme: " Matias Bjørling
2015-06-08 14:48 ` [PATCH v4 0/8] Support for Open-Channel SSDs Stephen Bates
2015-06-09 7:46 ` Christoph Hellwig
2015-06-10 18:11 ` Matias Bjorling
2015-06-11 10:29 ` Christoph Hellwig
2015-06-13 16:17 ` Matias Bjorling
2015-06-17 13:59 ` Christoph Hellwig
2015-06-17 18:04 ` Matias Bjorling
2015-07-16 12:23 ` Matias Bjørling
2015-07-16 12:46 ` Christoph Hellwig
2015-07-16 13:06 ` Matias Bjørling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433508870-28251-1-git-send-email-m@bjorling.me \
--to=m@bjorling.me \
--cc=Stephen.Bates@pmcs.com \
--cc=axboe@fb.com \
--cc=hch@infradead.org \
--cc=javier@lightnvm.io \
--cc=keith.busch@intel.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).