From: "Matias Bjørling" <m@bjorling.me>
To: hch@infradead.org, axboe@fb.com, linux-fsdevel@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-nvme@lists.infradead.org
Cc: jg@lightnvm.io, Stephen.Bates@pmcs.com, keith.busch@intel.com,
"Matias Bjørling" <mb@lightnvm.io>
Subject: [PATCH v7 0/5] Support for Open-Channel SSDs
Date: Fri, 7 Aug 2015 16:29:46 +0200 [thread overview]
Message-ID: <1438957791-24632-1-git-send-email-mb@lightnvm.io> (raw)
These patches implement support for Open-Channel SSDs.
Applies against axboe's linux-block/for-4.3/drivers and can be found
in the lkml_v7 branch at https://github.com/OpenChannelSSD/linux
Any feedback is greatly appreciated.
Changes since v6:
- Multipage support (Javier Gonzalez)
- General code cleanups
- Fixed memleak on register failure
Changes since v5:
Feedback from Christoph Hellwig.
- Created new null_nvm from null_blk to register itself as a lightnvm
device.
- Changed the interface of register/unregister to only take disk_name.
The gendisk alloc in nvme is kept. Most instantiations will
involve the device gendisk, therefore wait with refactoring to a
later time.
- Renamed global parameters in core.c and rrpc.c
Changes since v4:
- Remove gendisk->nvm dependency
- Remove device driver rq private field dependency.
- Update submission and completion. The flow is now
Target -> Block Manager -> Device Driver, replacing callbacks in
device driver.
- Abstracted out the block manager into its own module. Other block
managers can now be implemented. For example to support fully
host-based SSDs.
- No longer exposes the device driver gendisk to user-space.
- Management is moved into /sys/modules/lnvm/parameters/configure_debug
Changes since v3:
- Remove dependency on REQ_NVM_GC
- Refactor nvme integration to use nvme_submit_sync_cmd for
internal commands.
- Fix race condition bug on multiple threads on RRPC target.
- Rename sysfs entry under the block device from nvm to lightnvm.
The configuration is found in /sys/block/*/lightnvm/
Changes since v2:
Feedback from Paul Bolle:
- Fix license to GPLv2, documentation, compilation.
Feedback from Keith Busch:
- nvme: Move lightnvm out and into nvme-lightnvm.c.
- nvme: Set controller css on lightnvm command set.
- nvme: Remove OACS.
Feedback from Christoph Hellwig:
- lightnvm: Move out of block layer into /drivers/lightnvm/core.c
- lightnvm: refactor request->phys_sector into device drivers.
- lightnvm: refactor prep/unprep into device drivers.
- lightnvm: move nvm_dev from request_queue to gendisk.
New
- Bad block table support (From Javier).
- Update maintainers file.
Changes since v1:
- Splitted LightNVM into two parts. A get/put interface for flash
blocks and the respective targets that implement flash translation
layer logic.
- Updated the patches according to the LightNVM specification changes.
- Added interface to add/remove targets for a block device.
Thanks to Jens Axboe, Christoph Hellwig, Keith Busch, Paul Bolle,
Javier Gonzalez and Jesper Madsen for discussions and contributions.
Matias Bjørling (5):
lightnvm: Support for Open-Channel SSDs
lightnvm: Hybrid Open-Channel SSD RRPC target
lightnvm: Hybrid Open-Channel SSD block manager
null_nvm: Lightnvm test driver
nvme: LightNVM support
MAINTAINERS | 8 +
drivers/Kconfig | 2 +
drivers/Makefile | 5 +
drivers/block/Makefile | 2 +-
drivers/block/nvme-core.c | 23 +-
drivers/block/nvme-lightnvm.c | 568 ++++++++++++++++++
drivers/lightnvm/Kconfig | 36 ++
drivers/lightnvm/Makefile | 8 +
drivers/lightnvm/bm_hb.c | 366 ++++++++++++
drivers/lightnvm/bm_hb.h | 46 ++
drivers/lightnvm/core.c | 591 +++++++++++++++++++
drivers/lightnvm/null_nvm.c | 481 +++++++++++++++
drivers/lightnvm/rrpc.c | 1296 +++++++++++++++++++++++++++++++++++++++++
drivers/lightnvm/rrpc.h | 236 ++++++++
include/linux/lightnvm.h | 334 +++++++++++
include/linux/nvme.h | 6 +
include/uapi/linux/nvme.h | 3 +
17 files changed, 4007 insertions(+), 4 deletions(-)
create mode 100644 drivers/block/nvme-lightnvm.c
create mode 100644 drivers/lightnvm/Kconfig
create mode 100644 drivers/lightnvm/Makefile
create mode 100644 drivers/lightnvm/bm_hb.c
create mode 100644 drivers/lightnvm/bm_hb.h
create mode 100644 drivers/lightnvm/core.c
create mode 100644 drivers/lightnvm/null_nvm.c
create mode 100644 drivers/lightnvm/rrpc.c
create mode 100644 drivers/lightnvm/rrpc.h
create mode 100644 include/linux/lightnvm.h
--
2.1.4
next reply other threads:[~2015-08-07 14:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-07 14:29 Matias Bjørling [this message]
2015-08-07 14:29 ` [PATCH v7 1/5] lightnvm: Support for Open-Channel SSDs Matias Bjørling
2015-09-02 3:50 ` Dongsheng Yang
2015-09-02 10:48 ` Matias Bjørling
2015-09-04 7:06 ` Dongsheng Yang
2015-09-04 8:05 ` Matias Bjørling
2015-09-04 8:27 ` Dongsheng Yang
2015-09-04 8:49 ` Matias Bjørling
2015-08-07 14:29 ` [PATCH v7 2/5] lightnvm: Hybrid Open-Channel SSD RRPC target Matias Bjørling
2015-08-07 14:29 ` [PATCH v7 3/5] lightnvm: Hybrid Open-Channel SSD block manager Matias Bjørling
2015-08-07 14:29 ` [PATCH v7 4/5] null_nvm: Lightnvm test driver Matias Bjørling
2015-08-07 14:29 ` [PATCH v7 5/5] nvme: LightNVM support Matias Bjørling
2015-09-02 3:50 ` [PATCH v7 0/5] Support for Open-Channel SSDs Dongsheng Yang
2015-09-02 10:59 ` Matias Bjørling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438957791-24632-1-git-send-email-mb@lightnvm.io \
--to=m@bjorling.me \
--cc=Stephen.Bates@pmcs.com \
--cc=axboe@fb.com \
--cc=hch@infradead.org \
--cc=jg@lightnvm.io \
--cc=keith.busch@intel.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=mb@lightnvm.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).