From: Jan Kara <jack@suse.cz>
To: linux-fsdevel@vger.kernel.org
Cc: linux-ext4@vger.kernel.org, linux-mm@kvack.org,
Ross Zwisler <ross.zwisler@linux.intel.com>,
Dan Williams <dan.j.williams@intel.com>,
linux-nvdimm@lists.01.org, Matthew Wilcox <willy@linux.intel.com>,
Jan Kara <jack@suse.cz>
Subject: [PATCH 10/18] dax: Remove pointless writeback from dax_do_io()
Date: Mon, 18 Apr 2016 23:35:33 +0200 [thread overview]
Message-ID: <1461015341-20153-11-git-send-email-jack@suse.cz> (raw)
In-Reply-To: <1461015341-20153-1-git-send-email-jack@suse.cz>
dax_do_io() is calling filemap_write_and_wait() if DIO_LOCKING flags is
set. Presumably this was copied over from direct IO code. However DAX
inodes have no pagecache pages to write so the call is pointless. Remove
it.
Signed-off-by: Jan Kara <jack@suse.cz>
---
fs/dax.c | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/fs/dax.c b/fs/dax.c
index 7c0036dd1570..237581441bc1 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -268,15 +268,8 @@ ssize_t dax_do_io(struct kiocb *iocb, struct inode *inode,
memset(&bh, 0, sizeof(bh));
bh.b_bdev = inode->i_sb->s_bdev;
- if ((flags & DIO_LOCKING) && iov_iter_rw(iter) == READ) {
- struct address_space *mapping = inode->i_mapping;
+ if ((flags & DIO_LOCKING) && iov_iter_rw(iter) == READ)
inode_lock(inode);
- retval = filemap_write_and_wait_range(mapping, pos, end - 1);
- if (retval) {
- inode_unlock(inode);
- goto out;
- }
- }
/* Protects against truncate */
if (!(flags & DIO_SKIP_DIO_COUNT))
@@ -297,7 +290,6 @@ ssize_t dax_do_io(struct kiocb *iocb, struct inode *inode,
if (!(flags & DIO_SKIP_DIO_COUNT))
inode_dio_end(inode);
- out:
return retval;
}
EXPORT_SYMBOL_GPL(dax_do_io);
--
2.6.6
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2016-04-18 21:35 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-18 21:35 [RFC v3] [PATCH 0/18] DAX page fault locking Jan Kara
2016-04-18 21:35 ` [PATCH 01/18] ext4: Handle transient ENOSPC properly for DAX Jan Kara
2016-04-18 21:35 ` [PATCH 02/18] ext4: Fix race in transient ENOSPC detection Jan Kara
2016-04-18 21:35 ` [PATCH 03/18] DAX: move RADIX_DAX_ definitions to dax.c Jan Kara
2016-04-18 21:35 ` [PATCH 04/18] dax: Remove complete_unwritten argument Jan Kara
2016-04-18 21:35 ` [PATCH 05/18] ext2: Avoid DAX zeroing to corrupt data Jan Kara
2016-04-29 16:30 ` Ross Zwisler
2016-04-18 21:35 ` [PATCH 06/18] dax: Remove dead zeroing code from fault handlers Jan Kara
2016-04-29 16:48 ` Ross Zwisler
2016-04-18 21:35 ` [PATCH 07/18] ext4: Refactor direct IO code Jan Kara
2016-04-18 21:35 ` [PATCH 08/18] ext4: Pre-zero allocated blocks for DAX IO Jan Kara
2016-04-29 18:01 ` Ross Zwisler
2016-05-02 13:09 ` Jan Kara
2016-04-18 21:35 ` [PATCH 09/18] dax: Remove zeroing from dax_io() Jan Kara
2016-04-29 18:56 ` Ross Zwisler
2016-04-18 21:35 ` Jan Kara [this message]
2016-04-29 19:00 ` [PATCH 10/18] dax: Remove pointless writeback from dax_do_io() Ross Zwisler
2016-04-18 21:35 ` [PATCH 11/18] dax: Fix condition for filling of PMD holes Jan Kara
2016-04-29 19:08 ` Ross Zwisler
2016-05-02 13:16 ` Jan Kara
2016-04-18 21:35 ` [PATCH 12/18] dax: Remove redundant inode size checks Jan Kara
2016-04-18 21:35 ` [PATCH 13/18] dax: Make huge page handling depend of CONFIG_BROKEN Jan Kara
2016-04-29 19:53 ` Ross Zwisler
2016-05-02 13:19 ` Jan Kara
2016-04-18 21:35 ` [PATCH 14/18] dax: Define DAX lock bit for radix tree exceptional entry Jan Kara
2016-04-29 20:03 ` Ross Zwisler
2016-04-18 21:35 ` [PATCH 15/18] dax: Allow DAX code to replace exceptional entries Jan Kara
2016-04-29 20:29 ` Ross Zwisler
2016-04-18 21:35 ` [PATCH 16/18] dax: New fault locking Jan Kara
2016-04-27 4:27 ` NeilBrown
2016-05-06 4:13 ` Ross Zwisler
2016-05-10 12:27 ` Jan Kara
2016-05-11 19:26 ` Ross Zwisler
2016-05-12 7:58 ` Jan Kara
2016-04-18 21:35 ` [PATCH 17/18] dax: Use radix tree entry lock to protect cow faults Jan Kara
2016-04-19 11:46 ` Jerome Glisse
2016-04-19 14:33 ` Jan Kara
2016-04-19 15:19 ` Jerome Glisse
2016-04-18 21:35 ` [PATCH 18/18] dax: Remove i_mmap_lock protection Jan Kara
2016-05-06 3:35 ` [RFC v3] [PATCH 0/18] DAX page fault locking Ross Zwisler
2016-05-06 20:33 ` Ross Zwisler
2016-05-09 9:38 ` Jan Kara
2016-05-10 15:28 ` Jan Kara
2016-05-10 20:30 ` Ross Zwisler
2016-05-10 22:39 ` Ross Zwisler
2016-05-11 9:19 ` Jan Kara
2016-05-11 15:52 ` Ross Zwisler
2016-05-09 21:28 ` Verma, Vishal L
2016-05-10 11:52 ` Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461015341-20153-11-git-send-email-jack@suse.cz \
--to=jack@suse.cz \
--cc=dan.j.williams@intel.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-nvdimm@lists.01.org \
--cc=ross.zwisler@linux.intel.com \
--cc=willy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).