From: Vishal Verma <vishal.l.verma@intel.com>
To: linux-nvdimm@lists.01.org
Cc: Dan Williams <dan.j.williams@intel.com>,
linux-fsdevel@vger.kernel.org, linux-block@vger.kernel.org,
xfs@oss.sgi.com, linux-ext4@vger.kernel.org, linux-mm@kvack.org,
Matthew Wilcox <matthew@wil.cx>,
Ross Zwisler <ross.zwisler@linux.intel.com>,
Dave Chinner <david@fromorbit.com>, Jan Kara <jack@suse.cz>,
Jens Axboe <axboe@fb.com>, Al Viro <viro@zeniv.linux.org.uk>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org,
Christoph Hellwig <hch@infradead.org>,
Jeff Moyer <jmoyer@redhat.com>
Subject: [PATCH v4 1/7] block, dax: pass blk_dax_ctl through to drivers
Date: Thu, 28 Apr 2016 15:16:52 -0600 [thread overview]
Message-ID: <1461878218-3844-2-git-send-email-vishal.l.verma@intel.com> (raw)
In-Reply-To: <1461878218-3844-1-git-send-email-vishal.l.verma@intel.com>
From: Dan Williams <dan.j.williams@intel.com>
This is in preparation for doing badblocks checking against the
requested sector range in the driver. Currently we opportunistically
return as much data that can be "dax'd" starting at the given sector.
When errors are present we want to limit that range to the first
encountered error, or fail the dax request if the range encompasses an
error.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
arch/powerpc/sysdev/axonram.c | 10 +++++-----
drivers/block/brd.c | 9 +++++----
drivers/nvdimm/pmem.c | 9 +++++----
drivers/s390/block/dcssblk.c | 12 ++++++------
fs/block_dev.c | 2 +-
include/linux/blkdev.h | 3 +--
6 files changed, 23 insertions(+), 22 deletions(-)
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 0d112b9..d85673f 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -139,17 +139,17 @@ axon_ram_make_request(struct request_queue *queue, struct bio *bio)
/**
* axon_ram_direct_access - direct_access() method for block device
- * @device, @sector, @data: see block_device_operations method
+ * @dax: see block_device_operations method
*/
static long
-axon_ram_direct_access(struct block_device *device, sector_t sector,
- void __pmem **kaddr, pfn_t *pfn)
+axon_ram_direct_access(struct block_device *device, struct blk_dax_ctl *dax)
{
+ sector_t sector = get_start_sect(device) + dax->sector;
struct axon_ram_bank *bank = device->bd_disk->private_data;
loff_t offset = (loff_t)sector << AXON_RAM_SECTOR_SHIFT;
- *kaddr = (void __pmem __force *) bank->io_addr + offset;
- *pfn = phys_to_pfn_t(bank->ph_addr + offset, PFN_DEV);
+ dax->addr = (void __pmem __force *) bank->io_addr + offset;
+ dax->pfn = phys_to_pfn_t(bank->ph_addr + offset, PFN_DEV);
return bank->size - offset;
}
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 51a071e..71521c1 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -380,9 +380,10 @@ static int brd_rw_page(struct block_device *bdev, sector_t sector,
}
#ifdef CONFIG_BLK_DEV_RAM_DAX
-static long brd_direct_access(struct block_device *bdev, sector_t sector,
- void __pmem **kaddr, pfn_t *pfn)
+static long brd_direct_access(struct block_device *bdev,
+ struct blk_dax_ctl *dax)
{
+ sector_t sector = get_start_sect(bdev) + dax->sector;
struct brd_device *brd = bdev->bd_disk->private_data;
struct page *page;
@@ -391,8 +392,8 @@ static long brd_direct_access(struct block_device *bdev, sector_t sector,
page = brd_insert_page(brd, sector);
if (!page)
return -ENOSPC;
- *kaddr = (void __pmem *)page_address(page);
- *pfn = page_to_pfn_t(page);
+ dax->addr = (void __pmem *)page_address(page);
+ dax->pfn = page_to_pfn_t(page);
return PAGE_SIZE;
}
diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c
index f798899..f72733c 100644
--- a/drivers/nvdimm/pmem.c
+++ b/drivers/nvdimm/pmem.c
@@ -181,14 +181,15 @@ static int pmem_rw_page(struct block_device *bdev, sector_t sector,
return rc;
}
-static long pmem_direct_access(struct block_device *bdev, sector_t sector,
- void __pmem **kaddr, pfn_t *pfn)
+static long pmem_direct_access(struct block_device *bdev,
+ struct blk_dax_ctl *dax)
{
+ sector_t sector = get_start_sect(bdev) + dax->sector;
struct pmem_device *pmem = bdev->bd_disk->private_data;
resource_size_t offset = sector * 512 + pmem->data_offset;
- *kaddr = pmem->virt_addr + offset;
- *pfn = phys_to_pfn_t(pmem->phys_addr + offset, pmem->pfn_flags);
+ dax->addr = pmem->virt_addr + offset;
+ dax->pfn = phys_to_pfn_t(pmem->phys_addr + offset, pmem->pfn_flags);
return pmem->size - pmem->pfn_pad - offset;
}
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index b839086..613f587 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -30,8 +30,8 @@ static int dcssblk_open(struct block_device *bdev, fmode_t mode);
static void dcssblk_release(struct gendisk *disk, fmode_t mode);
static blk_qc_t dcssblk_make_request(struct request_queue *q,
struct bio *bio);
-static long dcssblk_direct_access(struct block_device *bdev, sector_t secnum,
- void __pmem **kaddr, pfn_t *pfn);
+static long dcssblk_direct_access(struct block_device *bdev,
+ struct blk_dax_ctl *dax)
static char dcssblk_segments[DCSSBLK_PARM_LEN] = "\0";
@@ -883,9 +883,9 @@ fail:
}
static long
-dcssblk_direct_access (struct block_device *bdev, sector_t secnum,
- void __pmem **kaddr, pfn_t *pfn)
+dcssblk_direct_access(struct block_device *bdev, struct blk_dax_ctl *dax)
{
+ sector_t secnum = get_start_sect(bdev) + dax->sector;
struct dcssblk_dev_info *dev_info;
unsigned long offset, dev_sz;
@@ -894,8 +894,8 @@ dcssblk_direct_access (struct block_device *bdev, sector_t secnum,
return -ENODEV;
dev_sz = dev_info->end - dev_info->start;
offset = secnum * 512;
- *kaddr = (void __pmem *) (dev_info->start + offset);
- *pfn = __pfn_to_pfn_t(PFN_DOWN(dev_info->start + offset), PFN_DEV);
+ dax->addr = (void __pmem *) (dev_info->start + offset);
+ dax->pfn = __pfn_to_pfn_t(PFN_DOWN(dev_info->start + offset), PFN_DEV);
return dev_sz - offset;
}
diff --git a/fs/block_dev.c b/fs/block_dev.c
index b25bb23..79defba 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -488,7 +488,7 @@ long bdev_direct_access(struct block_device *bdev, struct blk_dax_ctl *dax)
sector += get_start_sect(bdev);
if (sector % (PAGE_SIZE / 512))
return -EINVAL;
- avail = ops->direct_access(bdev, sector, &dax->addr, &dax->pfn);
+ avail = ops->direct_access(bdev, dax);
if (!avail)
return -ERANGE;
if (avail > 0 && avail & ~PAGE_MASK)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 669e419..9d8c6d5 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1656,8 +1656,7 @@ struct block_device_operations {
int (*rw_page)(struct block_device *, sector_t, struct page *, int rw);
int (*ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
int (*compat_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
- long (*direct_access)(struct block_device *, sector_t, void __pmem **,
- pfn_t *);
+ long (*direct_access)(struct block_device *, struct blk_dax_ctl *dax);
unsigned int (*check_events) (struct gendisk *disk,
unsigned int clearing);
/* ->media_changed() is DEPRECATED, use ->check_events() instead */
--
2.5.5
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2016-04-28 21:16 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-28 21:16 [PATCH v4 0/7] dax: handling media errors Vishal Verma
2016-04-28 21:16 ` Vishal Verma [this message]
2016-04-28 21:16 ` [PATCH v4 2/7] dax: fallback from pmd to pte on error Vishal Verma
2016-04-28 21:16 ` [PATCH v4 3/7] dax: enable dax in the presence of known media errors (badblocks) Vishal Verma
2016-04-28 21:16 ` [PATCH v4 4/7] dax: use sb_issue_zerout instead of calling dax_clear_sectors Vishal Verma
2016-04-28 21:16 ` [PATCH v4 5/7] fs: prioritize and separate direct_io from dax_io Vishal Verma
2016-05-02 14:56 ` Christoph Hellwig
2016-05-02 15:45 ` Vishal Verma
2016-05-02 15:41 ` Boaz Harrosh
2016-05-02 15:51 ` Vishal Verma
2016-05-02 16:03 ` Boaz Harrosh
2016-05-02 18:52 ` Verma, Vishal L
2016-05-02 16:01 ` Dan Williams
2016-05-02 16:22 ` Boaz Harrosh
2016-05-02 16:49 ` Dan Williams
2016-05-02 17:44 ` Boaz Harrosh
2016-05-02 18:10 ` Dan Williams
2016-05-02 18:32 ` Boaz Harrosh
2016-05-02 18:48 ` Dan Williams
2016-05-02 19:22 ` Boaz Harrosh
2016-05-05 14:24 ` Christoph Hellwig
2016-05-05 15:15 ` Dan Williams
2016-05-05 15:22 ` Christoph Hellwig
2016-05-05 16:24 ` Dan Williams
2016-05-05 21:45 ` Verma, Vishal L
2016-05-08 9:01 ` hch
2016-05-08 18:42 ` Verma, Vishal L
2016-05-05 21:42 ` Verma, Vishal L
2016-05-05 21:39 ` Verma, Vishal L
2016-05-08 9:01 ` hch
2016-04-28 21:16 ` [PATCH v4 6/7] dax: for truncate/hole-punch, do zeroing through the driver if possible Vishal Verma
2016-04-28 21:16 ` [PATCH v4 7/7] dax: fix a comment in dax_zero_page_range and dax_truncate_page Vishal Verma
2016-04-29 21:55 ` [PATCH v4 8/7] Documentation: add error handling information to dax.txt Vishal Verma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461878218-3844-2-git-send-email-vishal.l.verma@intel.com \
--to=vishal.l.verma@intel.com \
--cc=akpm@linux-foundation.org \
--cc=axboe@fb.com \
--cc=dan.j.williams@intel.com \
--cc=david@fromorbit.com \
--cc=hch@infradead.org \
--cc=jack@suse.cz \
--cc=jmoyer@redhat.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-nvdimm@lists.01.org \
--cc=matthew@wil.cx \
--cc=ross.zwisler@linux.intel.com \
--cc=viro@zeniv.linux.org.uk \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).