Re: freevxfs: hp-ux support. ( 1cce17017970c07) patchset 4/4

["Krzysztof Błaszkowski" <kb@sysmikro.com.pl>]

>From 627df3ea68b3d5d7e159163f3de610d1f9101fd4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Krzysztof=20B=C5=82aszkowski?= <kb@sysmikro.com.pl>
Date: Fri, 10 Jun 2016 13:35:40 +0200
Subject: [PATCH 4/4] updated Kconfig information
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Krzysztof Błaszkowski <kb@sysmikro.com.pl>
---
 fs/freevxfs/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/freevxfs/Kconfig b/fs/freevxfs/Kconfig
index 4cc1dd8..ce49df1 100644
--- a/fs/freevxfs/Kconfig
+++ b/fs/freevxfs/Kconfig
@@ -9,7 +9,8 @@ config VXFS_FS
 	  these particular OS implementations of vxfs may differ in on-disk
 	  data endianess and/or superblock offset. The vxfs module has been
 	  tested with SCO UnixWare and HP-UX B.10.20 (pa-risc 1.1 arch.)
-	  Currently only readonly access is supported.
+	  Currently only readonly access is supported and VxFX versions
+	  2, 3 and 4. Tests were performed with HP-UX VxFS version 3.
 
 	  NOTE: the file system type as used by mount(1), mount(2) and
 	  fstab(5) is 'vxfs' as it describes the file system format, not
-- 
2.8.3


-- 
Krzysztof Blaszkowski