From: Amir Goldstein <amir73il@gmail.com>
To: "Darrick J . Wong" <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>,
linux-xfs@vger.kernel.org, linux-fsdevel@vger.kernel.org
Subject: [PATCH v4] xfs: fix the size of xfs_mode_to_ftype table
Date: Thu, 22 Dec 2016 23:07:21 +0200 [thread overview]
Message-ID: <1482440841-10819-1-git-send-email-amir73il@gmail.com> (raw)
In-Reply-To: <1482343293-9028-1-git-send-email-amir73il@gmail.com>
Fix the size of the xfs_mode_to_ftype conversion table,
which was too small to handle a malformed on-disk value
of mode=S_IFMT.
Use a convenience macros S_DT(mode) to convert from
mode to dirent file type and change the name of the table
to xfs_dtype_to_ftype to correctly describe its index values.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
---
fs/xfs/libxfs/xfs_dir2.c | 17 ++++++++---------
fs/xfs/libxfs/xfs_dir2.h | 4 +++-
fs/xfs/xfs_iops.c | 2 +-
3 files changed, 12 insertions(+), 11 deletions(-)
Darrick,
So my holiday season cleanup is now down to this one patch.
I pulled back the common code and added the needed macros in
xfs code, so this can be safely applied to xfsprogs as well.
I will send a patch to xfsprogs later.
Tested with generic/396 with -n ftype=0|1.
Amir.
v4:
- independent fix patch for xfs
v3:
- resort to simpler cleanup with macros DT_MAX and S_DT()
- mention the minor bug fix in commit message
v2:
- add private conversion from common to on-disk values
v1:
- use common conversion functions to get on-disk values
diff --git a/fs/xfs/libxfs/xfs_dir2.c b/fs/xfs/libxfs/xfs_dir2.c
index c58d72c..539f498 100644
--- a/fs/xfs/libxfs/xfs_dir2.c
+++ b/fs/xfs/libxfs/xfs_dir2.c
@@ -41,15 +41,14 @@ struct xfs_name xfs_name_dotdot = { (unsigned char *)"..", 2, XFS_DIR3_FT_DIR };
* for file type specification. This will be propagated into the directory
* structure if appropriate for the given operation and filesystem config.
*/
-const unsigned char xfs_mode_to_ftype[S_IFMT >> S_SHIFT] = {
- [0] = XFS_DIR3_FT_UNKNOWN,
- [S_IFREG >> S_SHIFT] = XFS_DIR3_FT_REG_FILE,
- [S_IFDIR >> S_SHIFT] = XFS_DIR3_FT_DIR,
- [S_IFCHR >> S_SHIFT] = XFS_DIR3_FT_CHRDEV,
- [S_IFBLK >> S_SHIFT] = XFS_DIR3_FT_BLKDEV,
- [S_IFIFO >> S_SHIFT] = XFS_DIR3_FT_FIFO,
- [S_IFSOCK >> S_SHIFT] = XFS_DIR3_FT_SOCK,
- [S_IFLNK >> S_SHIFT] = XFS_DIR3_FT_SYMLINK,
+const unsigned char xfs_dtype_to_ftype[S_DT_MAX] = {
+ [DT_REG] = XFS_DIR3_FT_REG_FILE,
+ [DT_DIR] = XFS_DIR3_FT_DIR,
+ [DT_CHR] = XFS_DIR3_FT_CHRDEV,
+ [DT_BLK] = XFS_DIR3_FT_BLKDEV,
+ [DT_FIFO] = XFS_DIR3_FT_FIFO,
+ [DT_SOCK] = XFS_DIR3_FT_SOCK,
+ [DT_LNK] = XFS_DIR3_FT_SYMLINK,
};
/*
diff --git a/fs/xfs/libxfs/xfs_dir2.h b/fs/xfs/libxfs/xfs_dir2.h
index 0197590..a069c3e 100644
--- a/fs/xfs/libxfs/xfs_dir2.h
+++ b/fs/xfs/libxfs/xfs_dir2.h
@@ -35,7 +35,9 @@ extern struct xfs_name xfs_name_dotdot;
* directory filetype conversion tables.
*/
#define S_SHIFT 12
-extern const unsigned char xfs_mode_to_ftype[];
+#define S_DT(mode) (((mode) & S_IFMT) >> S_SHIFT)
+#define S_DT_MAX (S_DT(S_IFMT) + 1)
+extern const unsigned char xfs_dtype_to_ftype[];
/*
* directory operations vector for encode/decode routines
diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c
index 308bebb..d2da9ca 100644
--- a/fs/xfs/xfs_iops.c
+++ b/fs/xfs/xfs_iops.c
@@ -103,7 +103,7 @@ xfs_dentry_to_name(
{
namep->name = dentry->d_name.name;
namep->len = dentry->d_name.len;
- namep->type = xfs_mode_to_ftype[(mode & S_IFMT) >> S_SHIFT];
+ namep->type = xfs_dtype_to_ftype[S_DT(mode)];
}
STATIC void
--
2.7.4
next prev parent reply other threads:[~2016-12-22 21:07 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-19 20:10 [RFC][PATCH 00/11] common implementation of dirent file types Amir Goldstein
2016-12-19 20:10 ` [RFC][PATCH 01/11] fs: common implementation of file type conversions Amir Goldstein
2016-12-19 21:13 ` Darrick J. Wong
2016-12-20 5:01 ` Amir Goldstein
2016-12-20 7:37 ` [RFC][PATCH v2 " Amir Goldstein
2016-12-19 20:10 ` [RFC][PATCH 02/11] ufs: use fs_umode_to_dtype() helper Amir Goldstein
2016-12-19 20:11 ` [RFC][PATCH 03/11] hfsplus: " Amir Goldstein
2016-12-19 20:11 ` [RFC][PATCH 04/11] ext2: use common file type conversion Amir Goldstein
2016-12-19 20:11 ` [RFC][PATCH 05/11] exofs: " Amir Goldstein
2016-12-19 21:50 ` Boaz Harrosh
2016-12-19 20:11 ` [RFC][PATCH 06/11] ext4: " Amir Goldstein
2016-12-19 20:11 ` [RFC][PATCH 07/11] ocfs2: " Amir Goldstein
2016-12-19 20:11 ` [RFC][PATCH 08/11] f2fs: " Amir Goldstein
2016-12-19 20:11 ` [RFC][PATCH 09/11] nilfs2: " Amir Goldstein
2016-12-19 20:11 ` [RFC][PATCH 10/11] btrfs: " Amir Goldstein
2016-12-19 20:11 ` [RFC][PATCH 11/11] xfs: " Amir Goldstein
2016-12-19 21:55 ` Darrick J. Wong
2016-12-20 6:17 ` Amir Goldstein
2016-12-20 14:07 ` Amir Goldstein
2016-12-20 0:28 ` Darrick J. Wong
2016-12-20 5:20 ` Amir Goldstein
2016-12-21 5:23 ` Dave Chinner
2016-12-21 6:37 ` Amir Goldstein
2016-12-21 10:12 ` [RFC][PATCH v2 " Amir Goldstein
2016-12-21 18:01 ` [PATCH v3 " Amir Goldstein
2016-12-22 21:07 ` Amir Goldstein [this message]
2016-12-23 21:01 ` [PATCH v4] xfs: fix the size of xfs_mode_to_ftype table Darrick J. Wong
2016-12-24 7:31 ` Amir Goldstein
2016-12-24 14:11 ` Brian Foster
2016-12-21 15:06 ` [RFC][PATCH 11/11] xfs: use common file type conversion Theodore Ts'o
2016-12-21 16:37 ` Amir Goldstein
2016-12-21 22:56 ` Theodore Ts'o
2016-12-22 5:54 ` Amir Goldstein
2016-12-22 20:30 ` Amir Goldstein
2016-12-21 16:59 ` Miklos Szeredi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1482440841-10819-1-git-send-email-amir73il@gmail.com \
--to=amir73il@gmail.com \
--cc=darrick.wong@oracle.com \
--cc=david@fromorbit.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).