linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Amir Goldstein <amir73il@gmail.com>
To: Eryu Guan <eguan@redhat.com>
Cc: Josef Bacik <jbacik@fb.com>, Christoph Hellwig <hch@lst.de>,
	fstests@vger.kernel.org, linux-fsdevel@vger.kernel.org
Subject: [RFC][PATCH 7/8] fstests: add support for working with dm-log-writes target
Date: Wed, 23 Aug 2017 18:49:16 +0300	[thread overview]
Message-ID: <1503503357-26234-8-git-send-email-amir73il@gmail.com> (raw)
In-Reply-To: <1503503357-26234-1-git-send-email-amir73il@gmail.com>

Cherry-picked the relevant common bits from commit 70d41e17164b
in Josef Bacik's fstests tree (https://github.com/josefbacik/fstests).
Quoting from Josef's commit message:

  This patch adds the supporting code for using the dm-log-writes
  target.  The dmlogwrites code is similar to the dmflakey code, it just
  gives us functions to build and tear down a dm-log-writes target.  We
  add a new LOGWRITES_DEV variable to take in the device we will use as
  the log and add checks for that.

[Amir:]
- Removed unneeded _test_falloc_support
- Moved _require_log_writes to dmlogwrites
- Document _require_log_writes

Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
---
 README                       |  2 ++
 common/dmlogwrites           | 86 ++++++++++++++++++++++++++++++++++++++++++++
 doc/requirement-checking.txt | 20 +++++++++++
 3 files changed, 108 insertions(+)
 create mode 100644 common/dmlogwrites

diff --git a/README b/README
index 9456fa7..4963d28 100644
--- a/README
+++ b/README
@@ -91,6 +91,8 @@ Preparing system for tests:
              - set TEST_XFS_SCRUB=1 to have _check_xfs_filesystem run
                xfs_scrub -vd to scrub the filesystem metadata online before
                unmounting to run the offline check.
+             - setenv LOGWRITES_DEV to a block device to use for power fail
+               testing.
 
         - or add a case to the switch in common/config assigning
           these variables based on the hostname of your test
diff --git a/common/dmlogwrites b/common/dmlogwrites
new file mode 100644
index 0000000..50e209d
--- /dev/null
+++ b/common/dmlogwrites
@@ -0,0 +1,86 @@
+##/bin/bash
+#
+# Copyright (c) 2015 Facebook, Inc.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+#
+# common functions for setting up and tearing down a dm log-writes device
+
+_require_log_writes()
+{
+	_require_dm_target log-writes
+	_require_test_program "log-writes/replay-log"
+}
+
+_init_log_writes()
+{
+	local BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
+	LOGWRITES_NAME=logwrites-test
+	LOGWRITES_DMDEV=/dev/mapper/$LOGWRITES_NAME
+	LOGWRITES_TABLE="0 $BLK_DEV_SIZE log-writes $SCRATCH_DEV $LOGWRITES_DEV"
+	$DMSETUP_PROG create $LOGWRITES_NAME --table "$LOGWRITES_TABLE" || \
+		_fatal "failed to create log-writes device"
+	$DMSETUP_PROG mknodes > /dev/null 2>&1
+}
+
+_log_writes_mark()
+{
+	[ $# -ne 1 ] && _fatal "_log_writes_mark takes one argument"
+	$DMSETUP_PROG message $LOGWRITES_NAME 0 mark $1
+}
+
+_log_writes_mkfs()
+{
+	_scratch_options mkfs
+	_mkfs_dev $SCRATCH_OPTIONS $LOGWRITES_DMDEV
+	_log_writes_mark mkfs
+}
+
+_mount_log_writes()
+{
+	mount -t $FSTYP $MOUNT_OPTIONS $* $LOGWRITES_DMDEV $SCRATCH_MNT
+}
+
+_unmount_log_writes()
+{
+	$UMOUNT_PROG $SCRATCH_MNT
+}
+
+# _replay_log <mark>
+#
+# This replays the log contained on $INTEGRITY_DEV onto $SCRATCH_DEV upto the
+# mark passed in.
+_replay_log()
+{
+	_mark=$1
+
+	$here/src/log-writes/replay-log --log $LOGWRITES_DEV --replay $SCRATCH_DEV \
+		--end-mark $_mark > /dev/null 2>&1
+	[ $? -ne 0 ] && _fatal "replay failed"
+}
+
+_log_writes_remove()
+{
+	$DMSETUP_PROG remove $LOGWRITES_NAME > /dev/null 2>&1
+	$DMSETUP_PROG mknodes > /dev/null 2>&1
+}
+
+_cleanup_log_writes()
+{
+	# If dmsetup load fails then we need to make sure to do resume here
+	# otherwise the umount will hang
+	$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+	_log_writes_remove
+}
diff --git a/doc/requirement-checking.txt b/doc/requirement-checking.txt
index 95d10e6..4e01b1f 100644
--- a/doc/requirement-checking.txt
+++ b/doc/requirement-checking.txt
@@ -21,6 +21,10 @@ they have.  This is done with _require_<xxx> macros, which may take parameters.
 
 	_require_statx
 
+ (4) Device mapper requirement.
+
+	_require_dm_target
+	_require_log_writes
 
 ====================
 GENERAL REQUIREMENTS
@@ -102,3 +106,19 @@ _require_statx
 
      The test requires the use of the statx() system call and will be skipped
      if it isn't available in the kernel.
+
+
+==========================
+DEVICE MAPPER REQUIREMENTS
+==========================
+
+_require_dm_target <name>
+
+     The test requires the use of the device mapper target and will be skipped
+     if it isn't available in the kernel.
+
+_require_log_writes
+
+     The test requires the use of the device mapper target log-writes.
+     The test also requires the test program log-writes/replay-log is built
+     and will be skipped if either isn't available.
-- 
2.7.4

  parent reply	other threads:[~2017-08-23 15:49 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-23 15:49 [RFC][PATCH 0/8] Crash consistency xfstest using dm-log-writes Amir Goldstein
2017-08-23 15:49 ` [RFC][PATCH 1/8] common/rc: convert some egrep to grep Amir Goldstein
2017-08-23 15:49 ` [RFC][PATCH 2/8] common/rc: fix _require_xfs_io_command params check Amir Goldstein
2017-08-23 15:49 ` [RFC][PATCH 3/8] fsx: fixes to random seed Amir Goldstein
2017-08-23 15:49 ` [RFC][PATCH 4/8] fsx: fix path of .fsx* files Amir Goldstein
2017-08-23 15:49 ` [RFC][PATCH 5/8] fsx: add support for integrity check with dm-log-writes target Amir Goldstein
2017-08-23 15:49 ` [RFC][PATCH 6/8] log-writes: add replay-log program to replay " Amir Goldstein
2017-08-23 15:49 ` Amir Goldstein [this message]
2017-08-23 15:58   ` [RFC][PATCH 7/8] fstests: add support for working with " Amir Goldstein
2017-08-23 16:51     ` Josef Bacik
2017-08-23 15:49 ` [RFC][PATCH 8/8] fstests: add crash consistency fsx test using dm-log-writes Amir Goldstein

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1503503357-26234-8-git-send-email-amir73il@gmail.com \
    --to=amir73il@gmail.com \
    --cc=eguan@redhat.com \
    --cc=fstests@vger.kernel.org \
    --cc=hch@lst.de \
    --cc=jbacik@fb.com \
    --cc=linux-fsdevel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).