From: Nick Piggin <npiggin@suse.de>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux Filesystems <linux-fsdevel@vger.kernel.org>,
Mark Fasheh <mark.fasheh@oracle.com>,
Linux Memory Management <linux-mm@kvack.org>
Subject: [patch 08/44] mm: write iovec cleanup
Date: Tue, 24 Apr 2007 11:23:54 +1000 [thread overview]
Message-ID: <20070424013433.190269000@suse.de> (raw)
In-Reply-To: 20070424012346.696840000@suse.de
[-- Attachment #1: mm-write-iov-cleanup.patch --]
[-- Type: text/plain, Size: 8574 bytes --]
Hide some of the open-coded nr_segs tests into the iovec helpers. This is
all to simplify generic_file_buffered_write, because that gets more complex
in the next patch.
Cc: Linux Memory Management <linux-mm@kvack.org>
Cc: Linux Filesystems <linux-fsdevel@vger.kernel.org>
Signed-off-by: Nick Piggin <npiggin@suse.de>
mm/filemap.c | 36 +++++--------------
mm/filemap.h | 104 +++++++++++++++++++++++++++----------------------------
mm/filemap_xip.c | 17 +++-----
3 files changed, 69 insertions(+), 88 deletions(-)
Index: linux-2.6/mm/filemap.h
===================================================================
--- linux-2.6.orig/mm/filemap.h
+++ linux-2.6/mm/filemap.h
@@ -22,82 +22,82 @@ __filemap_copy_from_user_iovec_inatomic(
/*
* Copy as much as we can into the page and return the number of bytes which
- * were sucessfully copied. If a fault is encountered then clear the page
- * out to (offset+bytes) and return the number of bytes which were copied.
- *
- * NOTE: For this to work reliably we really want copy_from_user_inatomic_nocache
- * to *NOT* zero any tail of the buffer that it failed to copy. If it does,
- * and if the following non-atomic copy succeeds, then there is a small window
- * where the target page contains neither the data before the write, nor the
- * data after the write (it contains zero). A read at this time will see
- * data that is inconsistent with any ordering of the read and the write.
- * (This has been detected in practice).
+ * were sucessfully copied. If a fault is encountered then return the number of
+ * bytes which were copied.
*/
static inline size_t
-filemap_copy_from_user(struct page *page, unsigned long offset,
- const char __user *buf, unsigned bytes)
+filemap_copy_from_user_atomic(struct page *page, unsigned long offset,
+ const struct iovec *iov, unsigned long nr_segs,
+ size_t base, size_t bytes)
{
char *kaddr;
- int left;
+ size_t copied;
kaddr = kmap_atomic(page, KM_USER0);
- left = __copy_from_user_inatomic_nocache(kaddr + offset, buf, bytes);
+ if (likely(nr_segs == 1)) {
+ int left;
+ char __user *buf = iov->iov_base + base;
+ left = __copy_from_user_inatomic_nocache(kaddr + offset,
+ buf, bytes);
+ copied = bytes - left;
+ } else {
+ copied = __filemap_copy_from_user_iovec_inatomic(kaddr + offset,
+ iov, base, bytes);
+ }
kunmap_atomic(kaddr, KM_USER0);
- if (left != 0) {
- /* Do it the slow way */
- kaddr = kmap(page);
- left = __copy_from_user_nocache(kaddr + offset, buf, bytes);
- kunmap(page);
- }
- return bytes - left;
+ return copied;
}
/*
- * This has the same sideeffects and return value as filemap_copy_from_user().
- * The difference is that on a fault we need to memset the remainder of the
- * page (out to offset+bytes), to emulate filemap_copy_from_user()'s
- * single-segment behaviour.
+ * This has the same sideeffects and return value as
+ * filemap_copy_from_user_atomic().
+ * The difference is that it attempts to resolve faults.
*/
static inline size_t
-filemap_copy_from_user_iovec(struct page *page, unsigned long offset,
- const struct iovec *iov, size_t base, size_t bytes)
+filemap_copy_from_user(struct page *page, unsigned long offset,
+ const struct iovec *iov, unsigned long nr_segs,
+ size_t base, size_t bytes)
{
char *kaddr;
size_t copied;
- kaddr = kmap_atomic(page, KM_USER0);
- copied = __filemap_copy_from_user_iovec_inatomic(kaddr + offset, iov,
- base, bytes);
- kunmap_atomic(kaddr, KM_USER0);
- if (copied != bytes) {
- kaddr = kmap(page);
- copied = __filemap_copy_from_user_iovec_inatomic(kaddr + offset, iov,
- base, bytes);
- if (bytes - copied)
- memset(kaddr + offset + copied, 0, bytes - copied);
- kunmap(page);
+ kaddr = kmap(page);
+ if (likely(nr_segs == 1)) {
+ int left;
+ char __user *buf = iov->iov_base + base;
+ left = __copy_from_user_nocache(kaddr + offset, buf, bytes);
+ copied = bytes - left;
+ } else {
+ copied = __filemap_copy_from_user_iovec_inatomic(kaddr + offset,
+ iov, base, bytes);
}
+ kunmap(page);
return copied;
}
static inline void
-filemap_set_next_iovec(const struct iovec **iovp, size_t *basep, size_t bytes)
+filemap_set_next_iovec(const struct iovec **iovp, unsigned long nr_segs,
+ size_t *basep, size_t bytes)
{
- const struct iovec *iov = *iovp;
- size_t base = *basep;
-
- while (bytes) {
- int copy = min(bytes, iov->iov_len - base);
-
- bytes -= copy;
- base += copy;
- if (iov->iov_len == base) {
- iov++;
- base = 0;
+ if (likely(nr_segs == 1)) {
+ *basep += bytes;
+ } else {
+ const struct iovec *iov = *iovp;
+ size_t base = *basep;
+
+ while (bytes) {
+ int copy = min(bytes, iov->iov_len - base);
+
+ bytes -= copy;
+ base += copy;
+ if (iov->iov_len == base) {
+ iov++;
+ base = 0;
+ }
}
+ *iovp = iov;
+ *basep = base;
}
- *iovp = iov;
- *basep = base;
}
#endif
Index: linux-2.6/mm/filemap.c
===================================================================
--- linux-2.6.orig/mm/filemap.c
+++ linux-2.6/mm/filemap.c
@@ -1930,12 +1930,7 @@ generic_file_buffered_write(struct kiocb
/*
* handle partial DIO write. Adjust cur_iov if needed.
*/
- if (likely(nr_segs == 1))
- buf = iov->iov_base + written;
- else {
- filemap_set_next_iovec(&cur_iov, &iov_offset, written);
- buf = cur_iov->iov_base + iov_offset;
- }
+ filemap_set_next_iovec(&cur_iov, nr_segs, &iov_offset, written);
do {
struct page *page;
@@ -1945,6 +1940,7 @@ generic_file_buffered_write(struct kiocb
size_t bytes; /* Bytes to write to page */
size_t copied; /* Bytes copied from user */
+ buf = cur_iov->iov_base + iov_offset;
offset = (pos & (PAGE_CACHE_SIZE - 1));
index = pos >> PAGE_CACHE_SHIFT;
bytes = PAGE_CACHE_SIZE - offset;
@@ -1976,13 +1972,10 @@ generic_file_buffered_write(struct kiocb
if (unlikely(status))
goto fs_write_aop_error;
- if (likely(nr_segs == 1))
- copied = filemap_copy_from_user(page, offset,
- buf, bytes);
- else
- copied = filemap_copy_from_user_iovec(page, offset,
- cur_iov, iov_offset, bytes);
+ copied = filemap_copy_from_user(page, offset,
+ cur_iov, nr_segs, iov_offset, bytes);
flush_dcache_page(page);
+
status = a_ops->commit_write(file, page, offset, offset+bytes);
if (unlikely(status < 0))
goto fs_write_aop_error;
@@ -1993,20 +1986,11 @@ generic_file_buffered_write(struct kiocb
if (unlikely(status > 0)) /* filesystem did partial write */
copied = status;
- if (likely(copied > 0)) {
- written += copied;
- count -= copied;
- pos += copied;
- buf += copied;
- if (unlikely(nr_segs > 1)) {
- filemap_set_next_iovec(&cur_iov,
- &iov_offset, copied);
- if (count)
- buf = cur_iov->iov_base + iov_offset;
- } else {
- iov_offset += copied;
- }
- }
+ written += copied;
+ count -= copied;
+ pos += copied;
+ filemap_set_next_iovec(&cur_iov, nr_segs, &iov_offset, copied);
+
unlock_page(page);
mark_page_accessed(page);
page_cache_release(page);
Index: linux-2.6/mm/filemap_xip.c
===================================================================
--- linux-2.6.orig/mm/filemap_xip.c
+++ linux-2.6/mm/filemap_xip.c
@@ -14,7 +14,6 @@
#include <linux/uio.h>
#include <linux/rmap.h>
#include <asm/tlbflush.h>
-#include "filemap.h"
/*
* We do use our own empty page to avoid interference with other users
@@ -318,6 +317,7 @@ __xip_file_write(struct file *filp, cons
unsigned long index;
unsigned long offset;
size_t copied;
+ char *kaddr;
offset = (pos & (PAGE_CACHE_SIZE -1)); /* Within page */
index = pos >> PAGE_CACHE_SHIFT;
@@ -325,14 +325,6 @@ __xip_file_write(struct file *filp, cons
if (bytes > count)
bytes = count;
- /*
- * Bring in the user page that we will copy from _first_.
- * Otherwise there's a nasty deadlock on copying from the
- * same page as we're writing to, without it being marked
- * up-to-date.
- */
- fault_in_pages_readable(buf, bytes);
-
page = a_ops->get_xip_page(mapping,
index*(PAGE_SIZE/512), 0);
if (IS_ERR(page) && (PTR_ERR(page) == -ENODATA)) {
@@ -349,8 +341,13 @@ __xip_file_write(struct file *filp, cons
break;
}
- copied = filemap_copy_from_user(page, offset, buf, bytes);
+ fault_in_pages_readable(buf, bytes);
+ kaddr = kmap_atomic(page, KM_USER0);
+ copied = bytes -
+ __copy_from_user_inatomic_nocache(kaddr, buf, bytes);
+ kunmap_atomic(kaddr, KM_USER0);
flush_dcache_page(page);
+
if (likely(copied > 0)) {
status = copied;
--
next prev parent reply other threads:[~2007-04-24 5:20 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-04-24 1:23 [patch 00/44] Buffered write deadlock fix and new aops for 2.6.21-rc6-mm1 Nick Piggin
2007-04-24 1:23 ` [patch 01/44] mm: revert KERNEL_DS buffered write optimisation Nick Piggin
2007-04-24 1:23 ` [patch 02/44] Revert 81b0c8713385ce1b1b9058e916edcf9561ad76d6 Nick Piggin
2007-04-24 1:23 ` [patch 03/44] Revert 6527c2bdf1f833cc18e8f42bd97973d583e4aa83 Nick Piggin
2007-04-24 1:23 ` [patch 04/44] mm: clean up buffered write code Nick Piggin
2007-04-24 1:23 ` [patch 05/44] mm: debug write deadlocks Nick Piggin
2007-04-24 1:23 ` [patch 06/44] mm: trim more holes Nick Piggin
2007-04-24 6:07 ` Neil Brown
2007-04-24 6:17 ` Nick Piggin
2007-04-24 1:23 ` [patch 07/44] mm: buffered write cleanup Nick Piggin
2007-04-24 1:23 ` Nick Piggin [this message]
2007-04-24 1:23 ` [patch 09/44] mm: fix pagecache write deadlocks Nick Piggin
2007-04-24 1:23 ` [patch 10/44] mm: buffered write iterator Nick Piggin
2007-04-24 1:23 ` [patch 11/44] fs: fix data-loss on error Nick Piggin
2007-04-24 1:23 ` [patch 12/44] fs: introduce write_begin, write_end, and perform_write aops Nick Piggin
2007-04-24 6:59 ` Neil Brown
2007-04-24 7:23 ` Nick Piggin
2007-04-24 7:49 ` Neil Brown
2007-04-24 10:37 ` Nick Piggin
2007-04-24 1:23 ` [patch 13/44] mm: restore KERNEL_DS optimisations Nick Piggin
2007-04-24 10:43 ` Christoph Hellwig
2007-04-24 11:03 ` Nick Piggin
2007-04-24 1:24 ` [patch 14/44] implement simple fs aops Nick Piggin
2007-04-24 1:24 ` [patch 15/44] block_dev convert to new aops Nick Piggin
2007-04-24 1:24 ` [patch 16/44] rd " Nick Piggin
2007-04-24 10:46 ` Christoph Hellwig
2007-04-24 11:05 ` Nick Piggin
2007-04-24 11:11 ` Christoph Hellwig
2007-04-24 11:16 ` Nick Piggin
2007-04-24 11:18 ` Christoph Hellwig
2007-04-24 11:20 ` Nick Piggin
2007-04-24 11:42 ` Neil Brown
2007-04-24 1:24 ` [patch 17/44] ext2 " Nick Piggin
2007-04-24 1:24 ` [patch 18/44] ext3 " Nick Piggin
2007-04-24 1:24 ` [patch 19/44] ext4 " Nick Piggin
2007-04-24 1:24 ` [patch 20/44] xfs " Nick Piggin
2007-04-24 1:24 ` [patch 21/44] fs: new cont helpers Nick Piggin
2007-04-24 1:24 ` [patch 22/44] fat convert to new aops Nick Piggin
2007-04-24 1:24 ` [patch 23/44] adfs " Nick Piggin
2007-04-24 1:24 ` [patch 24/44] affs " Nick Piggin
2007-04-24 1:24 ` [patch 25/44] hfs " Nick Piggin
2007-04-24 1:24 ` [patch 26/44] hfsplus " Nick Piggin
2007-04-24 1:24 ` [patch 27/44] hpfs " Nick Piggin
2007-04-24 1:24 ` [patch 28/44] bfs " Nick Piggin
2007-04-24 1:24 ` [patch 29/44] qnx4 " Nick Piggin
2007-04-24 1:24 ` [patch 30/44] nfs " Nick Piggin
2007-04-24 1:24 ` [patch 31/44] smb " Nick Piggin
2007-04-24 1:24 ` [patch 32/44] ocfs2: " Nick Piggin
2007-04-24 1:24 ` [patch 33/44] gfs2 " Nick Piggin
2007-04-24 1:24 ` [patch 34/44] fs: no AOP_TRUNCATED_PAGE for writes Nick Piggin
2007-04-24 1:24 ` [patch 35/44] ecryptfs convert to new aops Nick Piggin
2007-04-24 1:24 ` [patch 36/44] fuse " Nick Piggin
2007-04-24 1:24 ` [patch 37/44] hostfs " Nick Piggin
2007-04-27 16:11 ` Jeff Dike
2007-04-24 1:24 ` [patch 38/44] jffs2 " Nick Piggin
2007-04-24 1:24 ` [patch 39/44] cifs " Nick Piggin
2007-04-24 1:24 ` [patch 40/44] ufs " Nick Piggin
2007-04-24 1:24 ` [patch 41/44] udf " Nick Piggin
2007-04-24 1:24 ` [patch 42/44] sysv " Nick Piggin
2007-04-24 1:24 ` [patch 43/44] minix " Nick Piggin
2007-04-24 1:24 ` [patch 44/44] jfs " Nick Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070424013433.190269000@suse.de \
--to=npiggin@suse.de \
--cc=akpm@linux-foundation.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mark.fasheh@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).