linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Morton <akpm@linux-foundation.org>
To: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Curt Wohlgemuth <curtw@google.com>,
	linux-fsdevel@vger.kernel.org,
	Nick Piggin <nickpiggin@yahoo.com.au>
Subject: Re: [PATCH] VFS: Fix race with new inode creation
Date: Tue, 14 Apr 2009 09:57:29 -0700	[thread overview]
Message-ID: <20090414095729.bd407689.akpm@linux-foundation.org> (raw)
In-Reply-To: <20090410160139.GO26366@ZenIV.linux.org.uk>

On Fri, 10 Apr 2009 17:01:39 +0100 Al Viro <viro@ZenIV.linux.org.uk> wrote:

> On Fri, Apr 10, 2009 at 08:31:40AM -0700, Curt Wohlgemuth wrote:
> > This patch fixes a race between a task creating a new inode, and one writing
> > that same new, dirty inode out to disk.
> > 
> > We found this using a particular workload (fsstress) along with other
> > ancillary processes running on the same machine.  The symptom is one or more
> > hung unkillable (uniterruptible sleep) tasks that try to operate on this new
> > inode.
> > 
> > The original comment block is wrong.  Since the inode gets marked dirty
> > after it's created, but before its I_LOCK bit is cleared, there _can_ be
> > somebody else doing something with this inode -- e.g., a writeback task
> > (in our case, __sync_single_inode()).
> 
> Um...  I'd say that the real bug in there is that we shouldn't *get* to
> __sync_single_inode() until I_NEW/I_LOCK are removed.

I suspect Nick recently fixed this?


commit aabb8fdb41128705fd1627f56fdd571e45fdbcdb
Author: Nick Piggin <npiggin@suse.de>
Date:   Wed Mar 11 13:17:36 2009 -0700

    fs: avoid I_NEW inodes
    
    To be on the safe side, it should be less fragile to exclude I_NEW inodes
    from inode list scans by default (unless there is an important reason to
    have them).
    
    Normally they will get excluded (eg.  by zero refcount or writecount etc),
    however it is a bit fragile for list walkers to know exactly what parts of
    the inode state is set up and valid to test when in I_NEW.  So along these
    lines, move I_NEW checks upward as well (sometimes taking I_FREEING etc
    checks with them too -- this shouldn't be a problem should it?)
    
    Signed-off-by: Nick Piggin <npiggin@suse.de>
    Acked-by: Jan Kara <jack@suse.cz>
    Cc: Al Viro <viro@zeniv.linux.org.uk>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

diff --git a/fs/dquot.c b/fs/dquot.c
index bca3cac..cb1c3bc 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -789,12 +789,12 @@ static void add_dquot_ref(struct super_block *sb, int type)
 
 	spin_lock(&inode_lock);
 	list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
+		if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
+			continue;
 		if (!atomic_read(&inode->i_writecount))
 			continue;
 		if (!dqinit_needed(inode, type))
 			continue;
-		if (inode->i_state & (I_FREEING|I_WILL_FREE))
-			continue;
 
 		__iget(inode);
 		spin_unlock(&inode_lock);
@@ -870,6 +870,12 @@ static void remove_dquot_ref(struct super_block *sb, int type,
 
 	spin_lock(&inode_lock);
 	list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
+		/*
+		 *  We have to scan also I_NEW inodes because they can already
+		 *  have quota pointer initialized. Luckily, we need to touch
+		 *  only quota pointers and these have separate locking
+		 *  (dqptr_sem).
+		 */
 		if (!IS_NOQUOTA(inode))
 			remove_inode_dquot_ref(inode, type, tofree_head);
 	}
diff --git a/fs/drop_caches.c b/fs/drop_caches.c
index 3e5637f..44d725f 100644
--- a/fs/drop_caches.c
+++ b/fs/drop_caches.c
@@ -18,7 +18,7 @@ static void drop_pagecache_sb(struct super_block *sb)
 
 	spin_lock(&inode_lock);
 	list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
-		if (inode->i_state & (I_FREEING|I_WILL_FREE))
+		if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
 			continue;
 		if (inode->i_mapping->nrpages == 0)
 			continue;
diff --git a/fs/inode.c b/fs/inode.c
index 826fb0b..06aa5a1 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -356,6 +356,8 @@ static int invalidate_list(struct list_head *head, struct list_head *dispose)
 		if (tmp == head)
 			break;
 		inode = list_entry(tmp, struct inode, i_sb_list);
+		if (inode->i_state & I_NEW)
+			continue;
 		invalidate_inode_buffers(inode);
 		if (!atomic_read(&inode->i_count)) {
 			list_move(&inode->i_list, dispose);
diff --git a/fs/notify/inotify/inotify.c b/fs/notify/inotify/inotify.c
index 331f2e8..220c13f 100644
--- a/fs/notify/inotify/inotify.c
+++ b/fs/notify/inotify/inotify.c
@@ -380,6 +380,14 @@ void inotify_unmount_inodes(struct list_head *list)
 		struct list_head *watches;
 
 		/*
+		 * We cannot __iget() an inode in state I_CLEAR, I_FREEING,
+		 * I_WILL_FREE, or I_NEW which is fine because by that point
+		 * the inode cannot have any associated watches.
+		 */
+		if (inode->i_state & (I_CLEAR|I_FREEING|I_WILL_FREE|I_NEW))
+			continue;
+
+		/*
 		 * If i_count is zero, the inode cannot have any watches and
 		 * doing an __iget/iput with MS_ACTIVE clear would actually
 		 * evict all inodes with zero i_count from icache which is
@@ -388,14 +396,6 @@ void inotify_unmount_inodes(struct list_head *list)
 		if (!atomic_read(&inode->i_count))
 			continue;
 
-		/*
-		 * We cannot __iget() an inode in state I_CLEAR, I_FREEING, or
-		 * I_WILL_FREE which is fine because by that point the inode
-		 * cannot have any associated watches.
-		 */
-		if (inode->i_state & (I_CLEAR | I_FREEING | I_WILL_FREE))
-			continue;
-
 		need_iput_tmp = need_iput;
 		need_iput = NULL;
 		/* In case inotify_remove_watch_locked() drops a reference. */


  parent reply	other threads:[~2009-04-14 17:00 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-10 15:31 [PATCH] VFS: Fix race with new inode creation Curt Wohlgemuth
2009-04-10 16:01 ` Al Viro
2009-04-10 16:08   ` Curt Wohlgemuth
2009-04-14 16:57   ` Andrew Morton [this message]
2009-04-14 17:30     ` Nick Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090414095729.bd407689.akpm@linux-foundation.org \
    --to=akpm@linux-foundation.org \
    --cc=curtw@google.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=nickpiggin@yahoo.com.au \
    --cc=viro@ZenIV.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).