From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
To: Al Viro <viro@ZenIV.linux.org.uk>, Jens Axboe <jens.axboe@oracle.com>
Cc: linux-fsdevel@vger.kernel.org,
Artem Bityutskiy <Artem.Bityutskiy@nokia.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 18/18] writeback: optimize periodic sync_supers
Date: Thu, 09 Jul 2009 11:50:26 +0300 [thread overview]
Message-ID: <20090709085026.12122.11937.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20090709084822.12122.79749.sendpatchset@localhost.localdomain>
The sync_supers thread wakes up every 5 seconds (by default) and
writes back all super blocks. It keeps waking up even if there
are no dirty super-blocks.
This patch improves it and makes sleep if there is nothing to do.
This optimization is quite important for small battery-powered
devices.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
include/linux/fs.h | 5 +----
mm/backing-dev.c | 46 +++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 46 insertions(+), 5 deletions(-)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 7882a61..ae626b7 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1793,10 +1793,7 @@ int __put_super_and_need_restart(struct super_block *sb);
* Note, VFS does not provide any protection for the super block clean/dirty
* state. File-systems should take care of this.
*/
-static inline void mark_sb_dirty(struct super_block *sb)
-{
- sb->s_dirty = 1;
-}
+void mark_sb_dirty(struct super_block *sb);
static inline void mark_sb_clean(struct super_block *sb)
{
sb->s_dirty = 0;
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 75e6c47..96f4b2a 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -32,6 +32,8 @@ LIST_HEAD(bdi_pending_list);
static struct task_struct *sync_supers_tsk;
static struct timer_list sync_supers_timer;
+static int supers_timer_armed;
+static DEFINE_SPINLOCK(supers_timer_lock);
static int bdi_sync_supers(void *);
static void sync_supers_timer_fn(unsigned long);
@@ -440,6 +442,11 @@ static void bdi_flush_io(struct backing_dev_info *bdi)
* or we risk deadlocking on ->s_umount. The longer term solution would be
* to implement sync_supers_bdi() or similar and simply do it from the
* bdi writeback tasks individually.
+ *
+ * Historically this thread woke up periodically, regardless of whether
+ * there was any dirty super block. However, nowadays it is optimized to
+ * wake up only when there is something to sync - this is better from the
+ * power management point of view.
*/
static int bdi_sync_supers(void *unused)
{
@@ -449,10 +456,24 @@ static int bdi_sync_supers(void *unused)
set_current_state(TASK_INTERRUPTIBLE);
schedule();
+ spin_lock(&supers_timer_lock);
+ /* Indicate that 'sync_supers' is in progress */
+ supers_timer_armed = -1;
+ spin_unlock(&supers_timer_lock);
+
/*
* Do this periodically, like kupdated() did before.
*/
sync_supers();
+
+ spin_lock(&supers_timer_lock);
+ if (supers_timer_armed == 1)
+ /* A super block was marked as dirty meanwhile */
+ arm_supers_timer();
+ else
+ /* No more dirty super blocks - we've synced'em all */
+ supers_timer_armed = 0;
+ spin_unlock(&supers_timer_lock);
}
return 0;
@@ -469,9 +490,32 @@ static void arm_supers_timer(void)
static void sync_supers_timer_fn(unsigned long unused)
{
wake_up_process(sync_supers_tsk);
- arm_supers_timer();
}
+void mark_sb_dirty(struct super_block *sb)
+{
+ sb->s_dirty = 1;
+
+ /*
+ * A super block has been marked dirty - arm the 'sync_supers' kernel
+ * thread timer to make sure the super block is synchronized later.
+ */
+ spin_lock(&supers_timer_lock);
+ if (!supers_timer_armed) {
+ arm_supers_timer();
+ supers_timer_armed = 1;
+ } else if (supers_timer_armed == -1) {
+ /*
+ * The super-blocks are being synchronized at the moment,
+ * indicate that a new super block has been marked as dirty and
+ * the timer should be armed again.
+ */
+ supers_timer_armed = 1;
+ }
+ spin_unlock(&supers_timer_lock);
+}
+EXPORT_SYMBOL(mark_sb_dirty);
+
static int bdi_forker_task(void *ptr)
{
struct bdi_writeback *me = ptr;
--
1.6.0.6
next prev parent reply other threads:[~2009-07-09 7:00 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-09 8:48 [PATCH v3 00/18] periodic write-back timer optimization Artem Bityutskiy
2009-07-09 8:48 ` [PATCH v3 01/18] VFS: introduce helpers for manipulation s_dirty flag Artem Bityutskiy
2009-07-09 8:48 ` [PATCH v3 02/18] AFFS: do not manipulate s_dirt directly Artem Bityutskiy
2009-07-09 8:48 ` [PATCH v3 03/18] BFS: " Artem Bityutskiy
2009-07-09 8:48 ` [PATCH v3 04/18] EXOFS: " Artem Bityutskiy
2009-07-12 9:53 ` Boaz Harrosh
2009-07-12 14:02 ` Artem Bityutskiy
2009-07-09 8:48 ` [PATCH v3 05/18] EXT2: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 06/18] EXT4: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 07/18] FAT: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 08/18] HFS: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 09/18] HFSPLUS: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 10/18] JFFS2: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 11/18] NILFS: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 12/18] reiserfs: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 13/18] SYSV: " Artem Bityutskiy
2009-07-09 8:49 ` [PATCH v3 14/18] UDF: " Artem Bityutskiy
2009-07-09 8:50 ` [PATCH v3 15/18] UFS: " Artem Bityutskiy
2009-07-09 8:50 ` [PATCH v3 16/18] VFS: use is_sb_dirty helper Artem Bityutskiy
2009-07-09 8:50 ` [PATCH v3 17/18] rename s_dirt to s_dirty Artem Bityutskiy
2009-07-09 8:50 ` Artem Bityutskiy [this message]
2009-07-09 12:37 ` [PATCH v3 00/18] periodic write-back timer optimization Andi Kleen
2009-07-09 13:04 ` Artem Bityutskiy
2009-07-15 6:21 ` Artem Bityutskiy
2009-07-24 15:45 ` Artem Bityutskiy
2009-09-14 15:27 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090709085026.12122.11937.sendpatchset@localhost.localdomain \
--to=artem.bityutskiy@nokia.com \
--cc=jens.axboe@oracle.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=viro@ZenIV.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).