From: Wu Fengguang <fengguang.wu@gmail.com>
To: Christoph Hellwig <hch@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Jens Axboe <jens.axboe@oracle.com>,
LKML <linux-kernel@vger.kernel.org>,
Dave Chinner <david@fromorbit.com>,
linux-fsdevel@vger.kernel.org
Subject: Re: [PATCH 4/6] writeback: remove unused nonblocking and congestion checks (xfs)
Date: Fri, 27 Nov 2009 19:50:29 +0800 [thread overview]
Message-ID: <20091127115029.GA20166@localhost> (raw)
In-Reply-To: <20091127114014.GA5132@infradead.org>
On Fri, Nov 27, 2009 at 06:40:14AM -0500, Christoph Hellwig wrote:
> On Fri, Nov 27, 2009 at 06:59:12PM +0800, Wu Fengguang wrote:
> > No one is calling wb_writeback and write_cache_pages with
> > wbc.nonblocking=1 any more. And lumpy pageout will want to do
> > nonblocking writeback without the congestion wait.
>
> Please, just fold this into one big patch removing the flag. Splitting
> this into multiple patches is just a real pain in the neck.
Sure. This is the folded version for the first 4 patches.
Thanks,
Fengguang
---
writeback: remove unused nonblocking and congestion checks
- no one is calling wb_writeback and write_cache_pages with
wbc.nonblocking=1 any more
- lumpy pageout will want to do nonblocking writeback without the
congestion wait
So remove the congestion checks as suggested by Chris.
CC: Chris Mason <chris.mason@oracle.com>
CC: Jens Axboe <jens.axboe@oracle.com>
CC: Christoph Hellwig <hch@infradead.org>
CC: Dave Chinner <david@fromorbit.com>
CC: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
---
drivers/staging/pohmelfs/inode.c | 10 ----------
fs/fs-writeback.c | 9 ---------
fs/xfs/linux-2.6/xfs_aops.c | 9 +--------
mm/page-writeback.c | 12 ------------
4 files changed, 1 insertion(+), 39 deletions(-)
--- linux.orig/fs/fs-writeback.c 2009-11-27 19:46:05.000000000 +0800
+++ linux/fs/fs-writeback.c 2009-11-27 19:46:10.000000000 +0800
@@ -657,14 +657,6 @@ static void writeback_inodes_wb(struct b
continue;
}
- if (wbc->nonblocking && bdi_write_congested(wb->bdi)) {
- wbc->encountered_congestion = 1;
- if (!is_blkdev_sb)
- break; /* Skip a congested fs */
- requeue_io(inode);
- continue; /* Skip a congested blockdev */
- }
-
/*
* Was this inode dirtied after sync_sb_inodes was called?
* This keeps sync from extra jobs and livelock.
@@ -787,7 +779,6 @@ static long wb_writeback(struct bdi_writ
break;
wbc.more_io = 0;
- wbc.encountered_congestion = 0;
wbc.nr_to_write = MAX_WRITEBACK_PAGES;
wbc.pages_skipped = 0;
writeback_inodes_wb(wb, &wbc);
--- linux.orig/drivers/staging/pohmelfs/inode.c 2009-11-27 19:06:00.000000000 +0800
+++ linux/drivers/staging/pohmelfs/inode.c 2009-11-27 19:46:31.000000000 +0800
@@ -143,7 +143,6 @@ static int pohmelfs_writepages(struct ad
struct inode *inode = mapping->host;
struct pohmelfs_inode *pi = POHMELFS_I(inode);
struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
- struct backing_dev_info *bdi = mapping->backing_dev_info;
int err = 0;
int done = 0;
int nr_pages;
@@ -152,11 +151,6 @@ static int pohmelfs_writepages(struct ad
int scanned = 0;
int range_whole = 0;
- if (wbc->nonblocking && bdi_write_congested(bdi)) {
- wbc->encountered_congestion = 1;
- return 0;
- }
-
if (wbc->range_cyclic) {
index = mapping->writeback_index; /* Start from prev offset */
end = -1;
@@ -248,10 +242,6 @@ retry:
if (wbc->nr_to_write <= 0)
done = 1;
- if (wbc->nonblocking && bdi_write_congested(bdi)) {
- wbc->encountered_congestion = 1;
- done = 1;
- }
continue;
out_continue:
--- linux.orig/fs/xfs/linux-2.6/xfs_aops.c 2009-11-27 19:06:00.000000000 +0800
+++ linux/fs/xfs/linux-2.6/xfs_aops.c 2009-11-27 19:46:40.000000000 +0800
@@ -904,16 +904,9 @@ xfs_convert_page(
if (startio) {
if (count) {
- struct backing_dev_info *bdi;
-
- bdi = inode->i_mapping->backing_dev_info;
wbc->nr_to_write--;
- if (bdi_write_congested(bdi)) {
- wbc->encountered_congestion = 1;
- done = 1;
- } else if (wbc->nr_to_write <= 0) {
+ if (wbc->nr_to_write <= 0)
done = 1;
- }
}
xfs_start_page_writeback(page, !page_dirty, count);
}
--- linux.orig/mm/page-writeback.c 2009-11-27 19:46:06.000000000 +0800
+++ linux/mm/page-writeback.c 2009-11-27 19:46:20.000000000 +0800
@@ -821,7 +821,6 @@ int write_cache_pages(struct address_spa
struct writeback_control *wbc, writepage_t writepage,
void *data)
{
- struct backing_dev_info *bdi = mapping->backing_dev_info;
int ret = 0;
int done = 0;
struct pagevec pvec;
@@ -834,11 +833,6 @@ int write_cache_pages(struct address_spa
int range_whole = 0;
long nr_to_write = wbc->nr_to_write;
- if (wbc->nonblocking && bdi_write_congested(bdi)) {
- wbc->encountered_congestion = 1;
- return 0;
- }
-
pagevec_init(&pvec, 0);
if (wbc->range_cyclic) {
writeback_index = mapping->writeback_index; /* prev offset */
@@ -957,12 +951,6 @@ continue_unlock:
break;
}
}
-
- if (wbc->nonblocking && bdi_write_congested(bdi)) {
- wbc->encountered_congestion = 1;
- done = 1;
- break;
- }
}
pagevec_release(&pvec);
cond_resched();
next prev parent reply other threads:[~2009-11-27 11:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20091127105908.944744141@intel.com>
[not found] ` <20091127110407.781077241@intel.com>
2009-11-27 11:40 ` [PATCH 4/6] writeback: remove unused nonblocking and congestion checks (xfs) Christoph Hellwig
2009-11-27 11:50 ` Wu Fengguang [this message]
2009-11-27 12:08 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091127115029.GA20166@localhost \
--to=fengguang.wu@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=david@fromorbit.com \
--cc=hch@infradead.org \
--cc=jens.axboe@oracle.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).