* [patch] fs: move code out of buffer.c
@ 2010-06-03 16:55 Nick Piggin
0 siblings, 0 replies; only message in thread
From: Nick Piggin @ 2010-06-03 16:55 UTC (permalink / raw)
To: Andrew Morton, Al Viro, Christoph Hellwig, linux-fsdevel
Another step towards decoupling mm/vfs from buffer_head code, and
a good cleanup in itself.
--
Move invalidate_bdev, block_sync_page into fs/block_dev.c.
Export kill_bdev as well, so brd doesn't have to open code it.
Reduce buffer_head.h requirement accordingly.
Removed a rather large comment from invalidate_bdev, as it looked a bit
obsolete to bother moving. The small comment replacing it says enough.
---
arch/powerpc/sysdev/axonram.c | 1
block/genhd.c | 1
block/ioctl.c | 2 -
drivers/block/amiflop.c | 2 -
drivers/block/brd.c | 9 ++---
drivers/block/floppy.c | 1
drivers/block/loop.c | 1
drivers/cdrom/cdrom.c | 1
drivers/char/sysrq.c | 1
drivers/md/dm.c | 1
drivers/md/md.c | 2 -
drivers/mtd/devices/block2mtd.c | 1
drivers/s390/block/dasd.c | 1
drivers/s390/char/tape_block.c | 1
drivers/scsi/scsicam.c | 1
drivers/staging/ramzswap/ramzswap_drv.c | 1
fs/block_dev.c | 36 ++++++++++++++++++--
fs/buffer.c | 56 --------------------------------
fs/cachefiles/interface.c | 1
fs/cramfs/inode.c | 1
fs/fs-writeback.c | 1
fs/libfs.c | 2 -
fs/quota/dquot.c | 1
fs/quota/quota.c | 1
fs/splice.c | 1
fs/sync.c | 1
include/linux/buffer_head.h | 1
include/linux/fs.h | 3 +
kernel/power/swap.c | 1
mm/page-writeback.c | 2 -
mm/swap_state.c | 1
31 files changed, 45 insertions(+), 91 deletions(-)
Index: linux-2.6/drivers/block/brd.c
===================================================================
--- linux-2.6.orig/drivers/block/brd.c
+++ linux-2.6/drivers/block/brd.c
@@ -16,7 +16,7 @@
#include <linux/bio.h>
#include <linux/highmem.h>
#include <linux/radix-tree.h>
-#include <linux/buffer_head.h> /* invalidate_bh_lrus() */
+#include <linux/fs.h>
#include <linux/slab.h>
#include <asm/uaccess.h>
@@ -359,14 +359,13 @@ static int brd_ioctl(struct block_device
error = -EBUSY;
if (bdev->bd_openers <= 1) {
/*
- * Invalidate the cache first, so it isn't written
- * back to the device.
+ * Kill the cache first, so it isn't written back to the
+ * device.
*
* Another thread might instantiate more buffercache here,
* but there is not much we can do to close that race.
*/
- invalidate_bh_lrus();
- truncate_inode_pages(bdev->bd_inode->i_mapping, 0);
+ kill_bdev(bdev);
brd_free_pages(brd);
error = 0;
}
Index: linux-2.6/drivers/block/loop.c
===================================================================
--- linux-2.6.orig/drivers/block/loop.c
+++ linux-2.6/drivers/block/loop.c
@@ -68,7 +68,6 @@
#include <linux/suspend.h>
#include <linux/freezer.h>
#include <linux/writeback.h>
-#include <linux/buffer_head.h> /* for invalidate_bdev() */
#include <linux/completion.h>
#include <linux/highmem.h>
#include <linux/kthread.h>
Index: linux-2.6/drivers/md/md.c
===================================================================
--- linux-2.6.orig/drivers/md/md.c
+++ linux-2.6/drivers/md/md.c
@@ -36,7 +36,7 @@
#include <linux/blkdev.h>
#include <linux/sysctl.h>
#include <linux/seq_file.h>
-#include <linux/buffer_head.h> /* for invalidate_bdev */
+#include <linux/fs.h>
#include <linux/poll.h>
#include <linux/ctype.h>
#include <linux/string.h>
Index: linux-2.6/fs/block_dev.c
===================================================================
--- linux-2.6.orig/fs/block_dev.c
+++ linux-2.6/fs/block_dev.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/blkpg.h>
#include <linux/buffer_head.h>
+#include <linux/swap.h>
#include <linux/pagevec.h>
#include <linux/writeback.h>
#include <linux/mpage.h>
@@ -62,13 +63,31 @@ static sector_t max_block(struct block_d
}
/* Kill _all_ buffers and pagecache , dirty or not.. */
-static void kill_bdev(struct block_device *bdev)
+void kill_bdev(struct block_device *bdev)
{
- if (bdev->bd_inode->i_mapping->nrpages == 0)
+ struct address_space *mapping = bdev->bd_inode->i_mapping;
+
+ if (mapping->nrpages == 0)
return;
+
invalidate_bh_lrus();
- truncate_inode_pages(bdev->bd_inode->i_mapping, 0);
+ truncate_inode_pages(mapping, 0);
}
+EXPORT_SYMBOL(kill_bdev);
+
+/* Invalidate clean unused buffers and pagecache. */
+void invalidate_bdev(struct block_device *bdev)
+{
+ struct address_space *mapping = bdev->bd_inode->i_mapping;
+
+ if (mapping->nrpages == 0)
+ return;
+
+ invalidate_bh_lrus();
+ lru_add_drain_all(); /* make sure all lru add caches are flushed */
+ invalidate_mapping_pages(mapping, 0, -1);
+}
+EXPORT_SYMBOL(invalidate_bdev);
int set_blocksize(struct block_device *bdev, int size)
{
@@ -1582,6 +1601,17 @@ ssize_t blkdev_aio_write(struct kiocb *i
}
EXPORT_SYMBOL_GPL(blkdev_aio_write);
+void block_sync_page(struct page *page)
+{
+ struct address_space *mapping;
+
+ smp_mb();
+ mapping = page_mapping(page);
+ if (mapping)
+ blk_run_backing_dev(mapping->backing_dev_info, page);
+}
+EXPORT_SYMBOL(block_sync_page);
+
/*
* Try to release a page associated with block device when the system
* is under memory pressure.
Index: linux-2.6/fs/quota/dquot.c
===================================================================
--- linux-2.6.orig/fs/quota/dquot.c
+++ linux-2.6/fs/quota/dquot.c
@@ -73,7 +73,6 @@
#include <linux/security.h>
#include <linux/kmod.h>
#include <linux/namei.h>
-#include <linux/buffer_head.h>
#include <linux/capability.h>
#include <linux/quotaops.h>
#include <linux/writeback.h> /* for inode_lock, oddly enough.. */
Index: linux-2.6/fs/quota/quota.c
===================================================================
--- linux-2.6.orig/fs/quota/quota.c
+++ linux-2.6/fs/quota/quota.c
@@ -13,7 +13,6 @@
#include <linux/kernel.h>
#include <linux/security.h>
#include <linux/syscalls.h>
-#include <linux/buffer_head.h>
#include <linux/capability.h>
#include <linux/quotaops.h>
#include <linux/types.h>
Index: linux-2.6/include/linux/fs.h
===================================================================
--- linux-2.6.orig/include/linux/fs.h
+++ linux-2.6/include/linux/fs.h
@@ -1948,6 +1948,7 @@ extern void bd_set_size(struct block_dev
extern void bd_forget(struct inode *inode);
extern void bdput(struct block_device *);
extern struct block_device *open_by_devnum(dev_t, fmode_t);
+extern void kill_bdev(struct block_device *);
extern void invalidate_bdev(struct block_device *);
extern int sync_blockdev(struct block_device *bdev);
extern struct super_block *freeze_bdev(struct block_device *);
@@ -1957,6 +1958,7 @@ extern int fsync_bdev(struct block_devic
#else
static inline void bd_forget(struct inode *inode) {}
static inline int sync_blockdev(struct block_device *bdev) { return 0; }
+static inline void kill_bdev(struct block_device *bdev) {}
static inline void invalidate_bdev(struct block_device *bdev) {}
static inline struct super_block *freeze_bdev(struct block_device *sb)
@@ -2214,6 +2216,7 @@ extern int generic_segment_checks(const
extern ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos);
extern int blkdev_fsync(struct file *filp, int datasync);
+extern void block_sync_page(struct page *page);
/* fs/splice.c */
extern ssize_t generic_file_splice_read(struct file *, loff_t *,
Index: linux-2.6/block/genhd.c
===================================================================
--- linux-2.6.orig/block/genhd.c
+++ linux-2.6/block/genhd.c
@@ -15,7 +15,6 @@
#include <linux/slab.h>
#include <linux/kmod.h>
#include <linux/kobj_map.h>
-#include <linux/buffer_head.h>
#include <linux/mutex.h>
#include <linux/idr.h>
Index: linux-2.6/block/ioctl.c
===================================================================
--- linux-2.6.orig/block/ioctl.c
+++ linux-2.6/block/ioctl.c
@@ -4,7 +4,7 @@
#include <linux/blkpg.h>
#include <linux/hdreg.h>
#include <linux/backing-dev.h>
-#include <linux/buffer_head.h>
+#include <linux/fs.h>
#include <linux/smp_lock.h>
#include <linux/blktrace_api.h>
#include <asm/uaccess.h>
Index: linux-2.6/drivers/block/amiflop.c
===================================================================
--- linux-2.6.orig/drivers/block/amiflop.c
+++ linux-2.6/drivers/block/amiflop.c
@@ -62,7 +62,7 @@
#include <linux/init.h>
#include <linux/amifdreg.h>
#include <linux/amifd.h>
-#include <linux/buffer_head.h>
+#include <linux/fs.h>
#include <linux/blkdev.h>
#include <linux/elevator.h>
#include <linux/interrupt.h>
Index: linux-2.6/drivers/block/floppy.c
===================================================================
--- linux-2.6.orig/drivers/block/floppy.c
+++ linux-2.6/drivers/block/floppy.c
@@ -188,7 +188,6 @@ static int print_unex = 1;
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mod_devicetable.h>
-#include <linux/buffer_head.h> /* for invalidate_buffers() */
#include <linux/mutex.h>
#include <linux/io.h>
#include <linux/uaccess.h>
Index: linux-2.6/drivers/char/sysrq.c
===================================================================
--- linux-2.6.orig/drivers/char/sysrq.c
+++ linux-2.6/drivers/char/sysrq.c
@@ -33,7 +33,6 @@
#include <linux/module.h>
#include <linux/suspend.h>
#include <linux/writeback.h>
-#include <linux/buffer_head.h> /* for fsync_bdev() */
#include <linux/swap.h>
#include <linux/spinlock.h>
#include <linux/vt_kern.h>
Index: linux-2.6/arch/powerpc/sysdev/axonram.c
===================================================================
--- linux-2.6.orig/arch/powerpc/sysdev/axonram.c
+++ linux-2.6/arch/powerpc/sysdev/axonram.c
@@ -25,7 +25,6 @@
#include <linux/bio.h>
#include <linux/blkdev.h>
-#include <linux/buffer_head.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/fs.h>
Index: linux-2.6/drivers/cdrom/cdrom.c
===================================================================
--- linux-2.6.orig/drivers/cdrom/cdrom.c
+++ linux-2.6/drivers/cdrom/cdrom.c
@@ -265,7 +265,6 @@
#include <linux/module.h>
#include <linux/fs.h>
-#include <linux/buffer_head.h>
#include <linux/major.h>
#include <linux/types.h>
#include <linux/errno.h>
Index: linux-2.6/drivers/md/dm.c
===================================================================
--- linux-2.6.orig/drivers/md/dm.c
+++ linux-2.6/drivers/md/dm.c
@@ -14,7 +14,6 @@
#include <linux/moduleparam.h>
#include <linux/blkpg.h>
#include <linux/bio.h>
-#include <linux/buffer_head.h>
#include <linux/mempool.h>
#include <linux/slab.h>
#include <linux/idr.h>
Index: linux-2.6/drivers/mtd/devices/block2mtd.c
===================================================================
--- linux-2.6.orig/drivers/mtd/devices/block2mtd.c
+++ linux-2.6/drivers/mtd/devices/block2mtd.c
@@ -14,7 +14,6 @@
#include <linux/list.h>
#include <linux/init.h>
#include <linux/mtd/mtd.h>
-#include <linux/buffer_head.h>
#include <linux/mutex.h>
#include <linux/mount.h>
#include <linux/slab.h>
Index: linux-2.6/drivers/s390/block/dasd.c
===================================================================
--- linux-2.6.orig/drivers/s390/block/dasd.c
+++ linux-2.6/drivers/s390/block/dasd.c
@@ -17,7 +17,6 @@
#include <linux/ctype.h>
#include <linux/major.h>
#include <linux/slab.h>
-#include <linux/buffer_head.h>
#include <linux/hdreg.h>
#include <linux/async.h>
#include <linux/mutex.h>
Index: linux-2.6/drivers/s390/char/tape_block.c
===================================================================
--- linux-2.6.orig/drivers/s390/char/tape_block.c
+++ linux-2.6/drivers/s390/char/tape_block.c
@@ -17,7 +17,6 @@
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
-#include <linux/buffer_head.h>
#include <linux/kernel.h>
#include <asm/debug.h>
Index: linux-2.6/drivers/scsi/scsicam.c
===================================================================
--- linux-2.6.orig/drivers/scsi/scsicam.c
+++ linux-2.6/drivers/scsi/scsicam.c
@@ -16,7 +16,6 @@
#include <linux/genhd.h>
#include <linux/kernel.h>
#include <linux/blkdev.h>
-#include <linux/buffer_head.h>
#include <asm/unaligned.h>
#include <scsi/scsicam.h>
Index: linux-2.6/kernel/power/swap.c
===================================================================
--- linux-2.6.orig/kernel/power/swap.c
+++ linux-2.6/kernel/power/swap.c
@@ -17,7 +17,6 @@
#include <linux/bitops.h>
#include <linux/genhd.h>
#include <linux/device.h>
-#include <linux/buffer_head.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/swap.h>
Index: linux-2.6/drivers/staging/ramzswap/ramzswap_drv.c
===================================================================
--- linux-2.6.orig/drivers/staging/ramzswap/ramzswap_drv.c
+++ linux-2.6/drivers/staging/ramzswap/ramzswap_drv.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/blkdev.h>
-#include <linux/buffer_head.h>
#include <linux/device.h>
#include <linux/genhd.h>
#include <linux/highmem.h>
Index: linux-2.6/fs/cachefiles/interface.c
===================================================================
--- linux-2.6.orig/fs/cachefiles/interface.c
+++ linux-2.6/fs/cachefiles/interface.c
@@ -11,7 +11,6 @@
#include <linux/slab.h>
#include <linux/mount.h>
-#include <linux/buffer_head.h>
#include "internal.h"
#define list_to_page(head) (list_entry((head)->prev, struct page, lru))
Index: linux-2.6/fs/cramfs/inode.c
===================================================================
--- linux-2.6.orig/fs/cramfs/inode.c
+++ linux-2.6/fs/cramfs/inode.c
@@ -20,7 +20,6 @@
#include <linux/cramfs_fs.h>
#include <linux/slab.h>
#include <linux/cramfs_fs_sb.h>
-#include <linux/buffer_head.h>
#include <linux/vfs.h>
#include <linux/mutex.h>
Index: linux-2.6/fs/fs-writeback.c
===================================================================
--- linux-2.6.orig/fs/fs-writeback.c
+++ linux-2.6/fs/fs-writeback.c
@@ -25,7 +25,6 @@
#include <linux/writeback.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
-#include <linux/buffer_head.h>
#include "internal.h"
#define inode_to_bdi(inode) ((inode)->i_mapping->backing_dev_info)
Index: linux-2.6/fs/splice.c
===================================================================
--- linux-2.6.orig/fs/splice.c
+++ linux-2.6/fs/splice.c
@@ -25,7 +25,6 @@
#include <linux/mm_inline.h>
#include <linux/swap.h>
#include <linux/writeback.h>
-#include <linux/buffer_head.h>
#include <linux/module.h>
#include <linux/syscalls.h>
#include <linux/uio.h>
Index: linux-2.6/fs/sync.c
===================================================================
--- linux-2.6.orig/fs/sync.c
+++ linux-2.6/fs/sync.c
@@ -13,7 +13,6 @@
#include <linux/linkage.h>
#include <linux/pagemap.h>
#include <linux/quotaops.h>
-#include <linux/buffer_head.h>
#include <linux/backing-dev.h>
#include "internal.h"
Index: linux-2.6/mm/page-writeback.c
===================================================================
--- linux-2.6.orig/mm/page-writeback.c
+++ linux-2.6/mm/page-writeback.c
@@ -32,7 +32,7 @@
#include <linux/sysctl.h>
#include <linux/cpu.h>
#include <linux/syscalls.h>
-#include <linux/buffer_head.h>
+#include <linux/buffer_head.h> /* __set_page_dirty_buffers */
#include <linux/pagevec.h>
/*
Index: linux-2.6/mm/swap_state.c
===================================================================
--- linux-2.6.orig/mm/swap_state.c
+++ linux-2.6/mm/swap_state.c
@@ -14,7 +14,6 @@
#include <linux/swapops.h>
#include <linux/init.h>
#include <linux/pagemap.h>
-#include <linux/buffer_head.h>
#include <linux/backing-dev.h>
#include <linux/pagevec.h>
#include <linux/migrate.h>
Index: linux-2.6/fs/buffer.c
===================================================================
--- linux-2.6.orig/fs/buffer.c
+++ linux-2.6/fs/buffer.c
@@ -235,51 +235,6 @@ out:
return ret;
}
-/* If invalidate_buffers() will trash dirty buffers, it means some kind
- of fs corruption is going on. Trashing dirty data always imply losing
- information that was supposed to be just stored on the physical layer
- by the user.
-
- Thus invalidate_buffers in general usage is not allwowed to trash
- dirty buffers. For example ioctl(FLSBLKBUF) expects dirty data to
- be preserved. These buffers are simply skipped.
-
- We also skip buffers which are still in use. For example this can
- happen if a userspace program is reading the block device.
-
- NOTE: In the case where the user removed a removable-media-disk even if
- there's still dirty data not synced on disk (due a bug in the device driver
- or due an error of the user), by not destroying the dirty buffers we could
- generate corruption also on the next media inserted, thus a parameter is
- necessary to handle this case in the most safe way possible (trying
- to not corrupt also the new disk inserted with the data belonging to
- the old now corrupted disk). Also for the ramdisk the natural thing
- to do in order to release the ramdisk memory is to destroy dirty buffers.
-
- These are two special cases. Normal usage imply the device driver
- to issue a sync on the device (without waiting I/O completion) and
- then an invalidate_buffers call that doesn't trash dirty buffers.
-
- For handling cache coherency with the blkdev pagecache the 'update' case
- is been introduced. It is needed to re-read from disk any pinned
- buffer. NOTE: re-reading from disk is destructive so we can do it only
- when we assume nobody is changing the buffercache under our I/O and when
- we think the disk contains more recent information than the buffercache.
- The update == 1 pass marks the buffers we need to update, the update == 2
- pass does the actual I/O. */
-void invalidate_bdev(struct block_device *bdev)
-{
- struct address_space *mapping = bdev->bd_inode->i_mapping;
-
- if (mapping->nrpages == 0)
- return;
-
- invalidate_bh_lrus();
- lru_add_drain_all(); /* make sure all lru add caches are flushed */
- invalidate_mapping_pages(mapping, 0, -1);
-}
-EXPORT_SYMBOL(invalidate_bdev);
-
/*
* Kick the writeback threads then try to free up some ZONE_NORMAL memory.
*/
@@ -3257,17 +3212,6 @@ out:
}
EXPORT_SYMBOL(try_to_free_buffers);
-void block_sync_page(struct page *page)
-{
- struct address_space *mapping;
-
- smp_mb();
- mapping = page_mapping(page);
- if (mapping)
- blk_run_backing_dev(mapping->backing_dev_info, page);
-}
-EXPORT_SYMBOL(block_sync_page);
-
/*
* There are no bdflush tunables left. But distributions are
* still running obsolete flush daemons, so we terminate them here.
Index: linux-2.6/include/linux/buffer_head.h
===================================================================
--- linux-2.6.orig/include/linux/buffer_head.h
+++ linux-2.6/include/linux/buffer_head.h
@@ -227,7 +227,6 @@ int generic_cont_expand_simple(struct in
int block_commit_write(struct page *page, unsigned from, unsigned to);
int block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
get_block_t get_block);
-void block_sync_page(struct page *);
sector_t generic_block_bmap(struct address_space *, sector_t, get_block_t *);
int block_truncate_page(struct address_space *, loff_t, get_block_t *);
int file_fsync(struct file *, int);
Index: linux-2.6/fs/libfs.c
===================================================================
--- linux-2.6.orig/fs/libfs.c
+++ linux-2.6/fs/libfs.c
@@ -12,7 +12,7 @@
#include <linux/mutex.h>
#include <linux/exportfs.h>
#include <linux/writeback.h>
-#include <linux/buffer_head.h>
+#include <linux/buffer_head.h> /* sync_mapping_buffers */
#include <asm/uaccess.h>
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-06-03 16:55 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-06-03 16:55 [patch] fs: move code out of buffer.c Nick Piggin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).