From: Mel Gorman <mel@csn.ul.ie>
To: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: linux-mm@kvack.org, linux-fsdevel@vger.kernel.org,
Linux Kernel List <linux-kernel@vger.kernel.org>,
Rik van Riel <riel@redhat.com>,
Johannes Weiner <hannes@cmpxchg.org>,
Minchan Kim <minchan.kim@gmail.com>,
Wu Fengguang <fengguang.wu@intel.com>,
Andrea Arcangeli <aarcange@redhat.com>,
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
Dave Chinner <david@fromorbit.com>,
Chris Mason <chris.mason@oracle.com>,
Christoph Hellwig <hch@lst.de>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH 03/10] writeback: Do not congestion sleep if there are no congested BDIs or significant writeback
Date: Thu, 9 Sep 2010 09:58:53 +0100 [thread overview]
Message-ID: <20100909085853.GK29263@csn.ul.ie> (raw)
In-Reply-To: <20100909120231.fe6d3078.kamezawa.hiroyu@jp.fujitsu.com>
On Thu, Sep 09, 2010 at 12:02:31PM +0900, KAMEZAWA Hiroyuki wrote:
> On Mon, 6 Sep 2010 11:47:26 +0100
> Mel Gorman <mel@csn.ul.ie> wrote:
>
> > If congestion_wait() is called with no BDIs congested, the caller will sleep
> > for the full timeout and this may be an unnecessary sleep. This patch adds
> > a wait_iff_congested() that checks congestion and only sleeps if a BDI is
> > congested or if there is a significant amount of writeback going on in an
> > interesting zone. Else, it calls cond_resched() to ensure the caller is
> > not hogging the CPU longer than its quota but otherwise will not sleep.
> >
> > This is aimed at reducing some of the major desktop stalls reported during
> > IO. For example, while kswapd is operating, it calls congestion_wait()
> > but it could just have been reclaiming clean page cache pages with no
> > congestion. Without this patch, it would sleep for a full timeout but after
> > this patch, it'll just call schedule() if it has been on the CPU too long.
> > Similar logic applies to direct reclaimers that are not making enough
> > progress.
> >
> > Signed-off-by: Mel Gorman <mel@csn.ul.ie>
> > ---
> > include/linux/backing-dev.h | 2 +-
> > include/trace/events/writeback.h | 7 ++++
> > mm/backing-dev.c | 66 ++++++++++++++++++++++++++++++++++++-
> > mm/page_alloc.c | 4 +-
> > mm/vmscan.c | 26 ++++++++++++--
> > 5 files changed, 96 insertions(+), 9 deletions(-)
> >
> > diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
> > index 35b0074..f1b402a 100644
> > --- a/include/linux/backing-dev.h
> > +++ b/include/linux/backing-dev.h
> > @@ -285,7 +285,7 @@ enum {
> > void clear_bdi_congested(struct backing_dev_info *bdi, int sync);
> > void set_bdi_congested(struct backing_dev_info *bdi, int sync);
> > long congestion_wait(int sync, long timeout);
> > -
> > +long wait_iff_congested(struct zone *zone, int sync, long timeout);
> >
> > static inline bool bdi_cap_writeback_dirty(struct backing_dev_info *bdi)
> > {
> > diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h
> > index 275d477..eeaf1f5 100644
> > --- a/include/trace/events/writeback.h
> > +++ b/include/trace/events/writeback.h
> > @@ -181,6 +181,13 @@ DEFINE_EVENT(writeback_congest_waited_template, writeback_congestion_wait,
> > TP_ARGS(usec_timeout, usec_delayed)
> > );
> >
> > +DEFINE_EVENT(writeback_congest_waited_template, writeback_wait_iff_congested,
> > +
> > + TP_PROTO(unsigned int usec_timeout, unsigned int usec_delayed),
> > +
> > + TP_ARGS(usec_timeout, usec_delayed)
> > +);
> > +
> > #endif /* _TRACE_WRITEBACK_H */
> >
> > /* This part must be outside protection */
> > diff --git a/mm/backing-dev.c b/mm/backing-dev.c
> > index 298975a..94b5433 100644
> > --- a/mm/backing-dev.c
> > +++ b/mm/backing-dev.c
> > @@ -724,6 +724,7 @@ static wait_queue_head_t congestion_wqh[2] = {
> > __WAIT_QUEUE_HEAD_INITIALIZER(congestion_wqh[0]),
> > __WAIT_QUEUE_HEAD_INITIALIZER(congestion_wqh[1])
> > };
> > +static atomic_t nr_bdi_congested[2];
> >
> > void clear_bdi_congested(struct backing_dev_info *bdi, int sync)
> > {
> > @@ -731,7 +732,8 @@ void clear_bdi_congested(struct backing_dev_info *bdi, int sync)
> > wait_queue_head_t *wqh = &congestion_wqh[sync];
> >
> > bit = sync ? BDI_sync_congested : BDI_async_congested;
> > - clear_bit(bit, &bdi->state);
> > + if (test_and_clear_bit(bit, &bdi->state))
> > + atomic_dec(&nr_bdi_congested[sync]);
> > smp_mb__after_clear_bit();
> > if (waitqueue_active(wqh))
> > wake_up(wqh);
> > @@ -743,7 +745,8 @@ void set_bdi_congested(struct backing_dev_info *bdi, int sync)
> > enum bdi_state bit;
> >
> > bit = sync ? BDI_sync_congested : BDI_async_congested;
> > - set_bit(bit, &bdi->state);
> > + if (!test_and_set_bit(bit, &bdi->state))
> > + atomic_inc(&nr_bdi_congested[sync]);
> > }
> > EXPORT_SYMBOL(set_bdi_congested);
> >
> > @@ -774,3 +777,62 @@ long congestion_wait(int sync, long timeout)
> > }
> > EXPORT_SYMBOL(congestion_wait);
> >
> > +/**
> > + * congestion_wait - wait for a backing_dev to become uncongested
> > + * @zone: A zone to consider the number of being being written back from
> > + * @sync: SYNC or ASYNC IO
> > + * @timeout: timeout in jiffies
> > + *
> > + * Waits for up to @timeout jiffies for a backing_dev (any backing_dev) to exit
> > + * write congestion. If no backing_devs are congested then the number of
> > + * writeback pages in the zone are checked and compared to the inactive
> > + * list. If there is no sigificant writeback or congestion, there is no point
> > + * in sleeping but cond_resched() is called in case the current process has
> > + * consumed its CPU quota.
> > + */
> > +long wait_iff_congested(struct zone *zone, int sync, long timeout)
> > +{
> > + long ret;
> > + unsigned long start = jiffies;
> > + DEFINE_WAIT(wait);
> > + wait_queue_head_t *wqh = &congestion_wqh[sync];
> > +
> > + /*
> > + * If there is no congestion, check the amount of writeback. If there
> > + * is no significant writeback and no congestion, just cond_resched
> > + */
> > + if (atomic_read(&nr_bdi_congested[sync]) == 0) {
> > + unsigned long inactive, writeback;
> > +
> > + inactive = zone_page_state(zone, NR_INACTIVE_FILE) +
> > + zone_page_state(zone, NR_INACTIVE_ANON);
> > + writeback = zone_page_state(zone, NR_WRITEBACK);
> > +
> > + /*
> > + * If less than half the inactive list is being written back,
> > + * reclaim might as well continue
> > + */
> > + if (writeback < inactive / 2) {
>
> Hmm..can't we have a way that "find a page which can be just dropped without writeback"
> rather than sleeping ?
Sure, just scan for clean pages but then younger clean pages would be reclaimed
before old dirty pages because we were not waiting on writeback. It's a
significant change.
> I think we can throttole the number of victims for avoidng I/O
> congestion as pages/tick....if exhausted, ok, we should sleep.
>
I think it would be tricky to throttle based on time effectively. I find
it easier to think about throttling in terms of congested device, number
of dirty pages in a zone or number of pages currently being written back
because these are events that can prevent reclaim taking place.
--
Mel Gorman
Part-time Phd Student Linux Technology Center
University of Limerick IBM Dublin Software Lab
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2010-09-09 8:58 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-06 10:47 [PATCH 0/9] Reduce latencies and improve overall reclaim efficiency v1 Mel Gorman
2010-09-06 10:47 ` [PATCH 01/10] tracing, vmscan: Add trace events for LRU list shrinking Mel Gorman
2010-09-06 10:47 ` [PATCH 02/10] writeback: Account for time spent congestion_waited Mel Gorman
2010-09-06 10:47 ` [PATCH 03/10] writeback: Do not congestion sleep if there are no congested BDIs or significant writeback Mel Gorman
2010-09-07 15:25 ` Minchan Kim
2010-09-08 11:04 ` Mel Gorman
2010-09-08 14:52 ` Minchan Kim
2010-09-09 8:54 ` Mel Gorman
2010-09-12 15:37 ` Minchan Kim
2010-09-13 8:55 ` Mel Gorman
2010-09-13 9:48 ` Minchan Kim
2010-09-13 10:07 ` Mel Gorman
2010-09-13 10:20 ` Minchan Kim
2010-09-13 10:30 ` Mel Gorman
2010-09-08 21:23 ` Andrew Morton
2010-09-09 10:43 ` Mel Gorman
2010-09-09 3:02 ` KAMEZAWA Hiroyuki
2010-09-09 8:58 ` Mel Gorman [this message]
2010-09-06 10:47 ` [PATCH 04/10] vmscan: Synchronous lumpy reclaim should not call congestion_wait() Mel Gorman
2010-09-07 15:26 ` Minchan Kim
2010-09-08 6:15 ` Johannes Weiner
2010-09-08 11:25 ` Wu Fengguang
2010-09-09 3:03 ` KAMEZAWA Hiroyuki
2010-09-06 10:47 ` [PATCH 05/10] vmscan: Synchrounous lumpy reclaim use lock_page() instead trylock_page() Mel Gorman
2010-09-07 15:28 ` Minchan Kim
2010-09-08 6:16 ` Johannes Weiner
2010-09-08 11:28 ` Wu Fengguang
2010-09-09 3:04 ` KAMEZAWA Hiroyuki
2010-09-09 3:15 ` KAMEZAWA Hiroyuki
2010-09-09 3:25 ` Wu Fengguang
2010-09-09 4:13 ` KOSAKI Motohiro
2010-09-09 9:22 ` Mel Gorman
2010-09-10 10:25 ` KOSAKI Motohiro
2010-09-10 10:33 ` KOSAKI Motohiro
2010-09-13 9:14 ` Mel Gorman
2010-09-14 10:14 ` KOSAKI Motohiro
2010-09-06 10:47 ` [PATCH 06/10] vmscan: Narrow the scenarios lumpy reclaim uses synchrounous reclaim Mel Gorman
2010-09-09 3:14 ` KAMEZAWA Hiroyuki
2010-09-06 10:47 ` [PATCH 07/10] vmscan: Remove dead code in shrink_inactive_list() Mel Gorman
2010-09-07 15:33 ` Minchan Kim
2010-09-06 10:47 ` [PATCH 08/10] vmscan: isolated_lru_pages() stop neighbour search if neighbour cannot be isolated Mel Gorman
2010-09-07 15:37 ` Minchan Kim
2010-09-08 11:12 ` Mel Gorman
2010-09-08 14:58 ` Minchan Kim
2010-09-08 11:37 ` Wu Fengguang
2010-09-08 12:50 ` Mel Gorman
2010-09-08 13:14 ` Wu Fengguang
2010-09-08 13:27 ` Mel Gorman
2010-09-09 3:17 ` KAMEZAWA Hiroyuki
2010-09-06 10:47 ` [PATCH 09/10] vmscan: Do not writeback filesystem pages in direct reclaim Mel Gorman
2010-09-13 13:31 ` Wu Fengguang
2010-09-13 13:55 ` Mel Gorman
2010-09-13 14:33 ` Wu Fengguang
2010-10-28 21:50 ` Christoph Hellwig
2010-10-29 10:26 ` Mel Gorman
2010-09-06 10:47 ` [PATCH 10/10] vmscan: Kick flusher threads to clean pages when reclaim is encountering dirty pages Mel Gorman
2010-09-09 3:22 ` KAMEZAWA Hiroyuki
2010-09-09 9:32 ` Mel Gorman
2010-09-13 0:53 ` KAMEZAWA Hiroyuki
2010-09-13 13:48 ` Wu Fengguang
2010-09-13 14:10 ` Mel Gorman
2010-09-13 14:41 ` Wu Fengguang
2010-09-06 10:49 ` [PATCH 0/9] Reduce latencies and improve overall reclaim efficiency v1 Mel Gorman
2010-09-08 3:14 ` KOSAKI Motohiro
2010-09-08 8:38 ` Mel Gorman
2010-09-13 23:10 ` Minchan Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100909085853.GK29263@csn.ul.ie \
--to=mel@csn.ul.ie \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=chris.mason@oracle.com \
--cc=david@fromorbit.com \
--cc=fengguang.wu@intel.com \
--cc=hannes@cmpxchg.org \
--cc=hch@lst.de \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=kosaki.motohiro@jp.fujitsu.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=minchan.kim@gmail.com \
--cc=riel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).