From: Charles Manning <manningc2@actrix.gen.nz>
To: Ryan Mallon <ryan@bluewatersys.com>
Cc: Charles Manning <cdhmanning@gmail.com>,
linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 7/8] Add yaffs2 file system: verification code and other headers
Date: Mon, 6 Dec 2010 10:20:36 +1300 [thread overview]
Message-ID: <201012061020.36345.manningc2@actrix.gen.nz> (raw)
In-Reply-To: <4CF7FAD2.9050006@bluewatersys.com>
On Friday 03 December 2010 09:00:18 Ryan Mallon wrote:
> On 12/01/2010 10:57 AM, Charles Manning wrote:
> > Signed-off-by: Charles Manning <cdhmanning@gmail.com>
> > ---
>
> <snip>
>
> > diff --git a/fs/yaffs2/yportenv.h b/fs/yaffs2/yportenv.h
> > new file mode 100644
> > index 0000000..8fd0da5
> > --- /dev/null
> > +++ b/fs/yaffs2/yportenv.h
> > @@ -0,0 +1,91 @@
> > +/*
> > + * YAFFS: Yet another Flash File System . A NAND-flash specific file
> > system. + *
> > + * Copyright (C) 2002-2010 Aleph One Ltd.
> > + * for Toby Churchill Ltd and Brightstar Engineering
> > + *
> > + * Created by Charles Manning <charles@aleph1.co.uk>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU Lesser General Public License version
> > 2.1 as + * published by the Free Software Foundation.
> > + *
> > + * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
> > + */
> > +
> > +#ifndef __YPORTENV_LINUX_H__
> > +#define __YPORTENV_LINUX_H__
> > +
> > +#include <linux/version.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mm.h>
> > +#include <linux/sched.h>
> > +#include <linux/string.h>
> > +#include <linux/slab.h>
> > +#include <linux/vmalloc.h>
> > +#include <linux/xattr.h>
> > +#include <linux/list.h>
> > +#include <linux/types.h>
> > +#include <linux/fs.h>
> > +#include <linux/stat.h>
> > +#include <linux/sort.h>
> > +#include <linux/bitops.h>
> > +
> > +#define YCHAR char
> > +#define YUCHAR unsigned char
> > +#define _Y(x) x
> > +#define yaffs_strcat(a, b) strcat(a, b)
> > +#define yaffs_strcpy(a, b) strcpy(a, b)
> > +#define yaffs_strncpy(a, b, c) strncpy(a, b, c)
> > +#define yaffs_strncmp(a, b, c) strncmp(a, b, c)
> > +#define yaffs_strnlen(s,m) strnlen(s,m)
> > +#define yaffs_sprintf sprintf
> > +#define yaffs_toupper(a) toupper(a)
> > +#define yaffs_sort(base, n, sz, cmp_fn) sort(base, n, sz, cmp_fn, NULL)
> > +
> > +#define Y_INLINE __inline__
> > +
> > +#define YAFFS_LOSTNFOUND_NAME "lost+found"
> > +#define YAFFS_LOSTNFOUND_PREFIX "obj"
> > +
> > +#define YMALLOC(x) kmalloc(x, GFP_NOFS)
> > +#define YFREE(x) kfree(x)
> > +#define YMALLOC_ALT(x) vmalloc(x)
> > +#define YFREE_ALT(x) vfree(x)
> > +#define YMALLOC_DMA(x) YMALLOC(x)
> > +
> > +#define YYIELD() schedule()
> > +#define Y_DUMP_STACK() dump_stack()
> > +
> > +#define YAFFS_ROOT_MODE 0755
> > +#define YAFFS_LOSTNFOUND_MODE 0700
> > +
> > +#define Y_CURRENT_TIME CURRENT_TIME.tv_sec
> > +#define Y_TIME_CONVERT(x) (x).tv_sec
> > +
> > +#define yaffs_sum_cmp(x, y) ((x) == (y))
> > +#define yaffs_strcmp(a, b) strcmp(a, b)
>
> You should try and remove the wrappers for as many of these as possible.
> I know the wrappers are there for portability to other operating
> systems, but for mainlining in Linux it makes the code more complex.
Thus far I have tried to keep all the code directly compilable for WinCE and
Linux.
I did some investigation over the weekend and I am pretty sure that if I
preserve just a few of these macros, YCHAR in particular, I can eliminate
almost everything else and just run the code through a sed script to generate
the WiNCE version.
I'll do that for the next release.
Charles
next prev parent reply other threads:[~2010-12-05 21:20 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-30 21:57 [PATCH 0/8] Add yaffs2 file system: Third patchset Charles Manning
2010-11-30 21:57 ` [PATCH 1/8] Add yaffs2 file system: allocator, attribs, bitmap code Charles Manning
2010-12-02 18:14 ` Marcin Slusarz
2010-12-02 19:20 ` Charles Manning
2010-12-02 19:49 ` Ryan Mallon
2010-12-02 20:48 ` kevin granade
2010-11-30 21:57 ` [PATCH 2/8] Add yaffs2 file system: checkpoint and ecc code Charles Manning
2010-12-05 21:55 ` Jesper Juhl
2010-11-30 21:57 ` [PATCH 3/8] Add yaffs2 file system: guts code Charles Manning
2010-11-30 22:23 ` Arnd Bergmann
2010-12-06 1:50 ` Charles Manning
2010-12-06 12:55 ` Arnd Bergmann
2010-12-06 22:13 ` Charles Manning
2010-12-06 22:16 ` Jesper Juhl
2010-12-06 23:03 ` Arnd Bergmann
2010-12-07 0:47 ` Steven Rostedt
2010-12-07 4:12 ` Charles Manning
2010-12-07 14:49 ` Steven Rostedt
2010-12-07 20:43 ` Charles Manning
2010-12-07 22:49 ` Steven Rostedt
2010-11-30 21:57 ` [PATCH 4/8] Add yaffs2 file system: tags handling code Charles Manning
2010-12-05 22:12 ` Jesper Juhl
2010-11-30 21:57 ` [PATCH 5/8] Add yaffs2 file system: mtd and flash " Charles Manning
2010-12-05 22:42 ` Jesper Juhl
2010-11-30 21:57 ` [PATCH 6/8] Add yaffs2 file system: xattrib code Charles Manning
2010-12-05 22:20 ` Jesper Juhl
2010-11-30 21:57 ` [PATCH 7/8] Add yaffs2 file system: verification code and other headers Charles Manning
2010-12-02 20:00 ` Ryan Mallon
2010-12-05 21:20 ` Charles Manning [this message]
2010-12-05 21:45 ` Ryan Mallon
2010-12-05 22:50 ` Charles Manning
2010-12-07 15:06 ` Pekka Enberg
2010-11-30 21:57 ` [PATCH 8/8] Add yaffs2 file system: VFS glue code, hook into kernel tree building Charles Manning
2010-12-01 5:30 ` Nick Piggin
2010-12-02 20:35 ` Ryan Mallon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201012061020.36345.manningc2@actrix.gen.nz \
--to=manningc2@actrix.gen.nz \
--cc=cdhmanning@gmail.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ryan@bluewatersys.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).