From: "Jörn Engel" <joern@logfs.org>
To: srimugunthan dhandapani <srimugunthan.dhandapani@gmail.com>
Cc: linux-fsdevel@vger.kernel.org, linux-mtd@lists.infradead.org
Subject: Re: logfs: max 4K writepage size
Date: Wed, 7 Sep 2011 08:56:21 +0200 [thread overview]
Message-ID: <20110907065621.GL32018@logfs.org> (raw)
In-Reply-To: <CAMjNe_fdRw=5-MjOii8aGfEvejPo-dR6Rpf1=JQf_gMJ3U9jfQ@mail.gmail.com>
On Sun, 4 September 2011 15:50:03 +0530, srimugunthan dhandapani wrote:
>
> If you plan to do this, when can we expect your patches in the kernel?
Don't expect me to predict the future - my past predictions have not
proven to be very reliable.
> Can you suggest what changes have to be done to have >4K writepage size.
I think the only change strictly necessary is the patch below,
removing an assertion. Plus the second patch below for mklogfs.
> From what i looked, it doesnt seem straight forward. I think the 4K
> writepage size restriction is because
> the flash device is memory mapped for caching purposes.
> Initially, I wouldnt want to have the caching feature.
Careful. I know that for some devices the caching makes a performance
difference somewhere between 100x and 1000x. Pretty much whenever you
encounter a crap FTL on your random USB stick, SDcard, etc. that is
the case. So if you want to avoid caching for your purposes, you'd
have to do it in a way that doesn't cause a huge performance
regression to these devices. In other words, caching needs to stay in
the code, but be made contingent on some condition that I couldn't
specify in half an hour.
As the result - having both caching and non-caching code, plus some
decision heuristic - will be a non-trivial maintenance burden, there
should also be a non-trivial performance benefit attached. But then
again, I suppose the two patches below mean you won't even attempt
going non-caching anyway. :)
Jörn
--
Unless something dramatically changes, by 2015 we'll be largely
wondering what all the fuss surrounding Linux was really about.
-- Rob Enderle
[PATCH] logfs: remove useless BUG_ON
It prevents write sizes >4k.
Signed-off-by: Joern Engel <joern@logfs.org>
---
fs/logfs/journal.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/fs/logfs/journal.c b/fs/logfs/journal.c
index 9da2970..1e1c369 100644
--- a/fs/logfs/journal.c
+++ b/fs/logfs/journal.c
@@ -612,7 +612,6 @@ static size_t __logfs_write_je(struct super_block *sb, void *buf, u16 type,
if (len == 0)
return logfs_write_header(super, header, 0, type);
- BUG_ON(len > sb->s_blocksize);
compr_len = logfs_compress(buf, data, len, sb->s_blocksize);
if (compr_len < 0 || type == JE_ANCHOR) {
memcpy(data, buf, len);
--
1.7.2.3
[PATCH] Allow larger write shift
Current flashes with 8k write size already exist. Why pick 16? No
good reason, it's a bit bigger and will do for a while. Maybe 32 or
64 would be sane choices - beyond 64 is definitely insane - but until
someone can properly argue where exactly the boundary should be, this
is good enough for a while.
Signed-off-by: Joern Engel <joern@logfs.org>
---
mkfs.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/mkfs.c b/mkfs.c
index fd54b75..138067a 100644
--- a/mkfs.c
+++ b/mkfs.c
@@ -514,8 +514,8 @@ static void mkfs(struct super_block *sb)
fail("segment shift must be larger than block shift");
if (blockshift != 12)
fail("blockshift must be 12");
- if (writeshift > 12)
- fail("writeshift too large (max 12)");
+ if (writeshift > 16)
+ fail("writeshift too large (max 16)");
sb->segsize = 1 << segshift;
sb->blocksize = 1 << blockshift;
sb->blocksize_bits = blockshift;
--
1.7.2.3
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2011-09-07 6:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-04 10:20 logfs: max 4K writepage size srimugunthan dhandapani
2011-09-07 6:56 ` Jörn Engel [this message]
2011-09-07 17:30 ` srimugunthan dhandapani
2011-09-07 19:17 ` Jörn Engel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110907065621.GL32018@logfs.org \
--to=joern@logfs.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=srimugunthan.dhandapani@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).