linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vivek Goyal <vgoyal@redhat.com>
To: Fengguang Wu <fengguang.wu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
	LKML <linux-kernel@vger.kernel.org>,
	"Myklebust, Trond" <Trond.Myklebust@netapp.com>,
	linux-fsdevel@vger.kernel.org,
	Linux Memory Management List <linux-mm@kvack.org>,
	Jens Axboe <axboe@kernel.dk>
Subject: Re: write-behind on streaming writes
Date: Wed, 6 Jun 2012 13:04:28 -0400	[thread overview]
Message-ID: <20120606170428.GB8133@redhat.com> (raw)
In-Reply-To: <20120606140058.GA8098@localhost>

On Wed, Jun 06, 2012 at 10:00:58PM +0800, Fengguang Wu wrote:
> On Wed, Jun 06, 2012 at 08:14:08AM -0400, Vivek Goyal wrote:
> > On Tue, Jun 05, 2012 at 08:14:08PM -0700, Linus Torvalds wrote:
> > > On Tue, Jun 5, 2012 at 7:57 PM, Vivek Goyal <vgoyal@redhat.com> wrote:
> > > >
> > > > I had expected a bigger difference as sync_file_range() is just driving
> > > > max queue depth of 32 (total 16MB IO in flight), while flushers are
> > > > driving queue depths up to 140 or so. So in this paritcular test, driving
> > > > much deeper queue depths is not really helping much. (I have seen higher
> > > > throughputs with higher queue depths in the past. Now sure why don't we
> > > > see it here).
> > > 
> > > How did interactivity feel?
> > > 
> > > Because quite frankly, if the throughput difference is 12.5 vs 12
> > > seconds, I suspect the interactivity thing is what dominates.
> > > 
> > > And from my memory of the interactivity different was absolutely
> > > *huge*. Even back when I used rotational media, I basically couldn't
> > > even notice the background write with the sync_file_range() approach.
> > > While the regular writeback without the writebehind had absolutely
> > > *huge* pauses if you used something like firefox that uses fsync()
> > > etc. And starting new applications that weren't cached was noticeably
> > > worse too - and then with sync_file_range it wasn't even all that
> > > noticeable.
> > > 
> > > NOTE! For the real "firefox + fsync" test, I suspect you'd need to do
> > > the writeback on the same filesystem (and obviously disk) as your home
> > > directory is. If the big write is to another filesystem and another
> > > disk, I think you won't see the same issues.
> > 
> > Ok, I did following test on my single SATA disk and my root filesystem
> > is on this disk.
> > 
> > I dropped caches and launched firefox and monitored the time it takes
> > for firefox to start. (cache cold).
> > 
> > And my results are reverse of what you have been seeing. With
> > sync_file_range() running, firefox takes roughly 30 seconds to start and
> > with flusher in operation, it takes roughly 20 seconds to start. (I have
> > approximated the average of 3 runs for simplicity).
> > 
> > I think it is happening because sync_file_range() will send all
> > the writes as SYNC and it will compete with firefox IO. On the other
> > hand, flusher's IO will show up as ASYNC and CFQ  will be penalize it
> > heavily and firefox's IO will be prioritized. And this effect should
> > just get worse as more processes do sync_file_range().
> > 
> > So write-behind should provide better interactivity if writes submitted
> > are ASYNC and not SYNC.
> 
> Hi Vivek, thanks for testing all of these out! The result is
> definitely interesting and a surprise: we overlooked the SYNC nature
> of sync_file_range().
> 
> I'd suggest to use these calls to achieve the write-and-drop-behind
> behavior, *with* WB_SYNC_NONE:
> 
>         posix_fadvise(fd, offset, len, POSIX_FADV_DONTNEED);
>         sync_file_range(fd, offset, len, SYNC_FILE_RANGE_WAIT_AFTER);
> 
> The caveat is, the below bdi_write_congested() will never evaluate to
> true since we are only filling the request queue with 8MB data.
> 
> SYSCALL_DEFINE(fadvise64_64):
> 
>         case POSIX_FADV_DONTNEED:
>                 if (!bdi_write_congested(mapping->backing_dev_info))
>                         __filemap_fdatawrite_range(mapping, offset, endbyte,
>                                                    WB_SYNC_NONE);

Hi Fengguang,

Instead of above, I modified sync_file_range() to call __filemap_fdatawrite_range(WB_SYNC_NONE) and I do see now ASYNC writes showing up at elevator.

With 4 processes doing sync_file_range() now, firefox start time test
clocks around 18-19 seconds which is better than 30-35 seconds of 4
processes doing buffered writes. And system looks pretty good from
interactivity point of view.

Thanks
Vivek

Following is the patch I applied to test.

---
 fs/sync.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: linux-2.6/fs/sync.c
===================================================================
--- linux-2.6.orig/fs/sync.c	2012-06-06 00:12:33.000000000 -0400
+++ linux-2.6/fs/sync.c	2012-06-06 23:11:17.050691776 -0400
@@ -342,7 +342,7 @@ SYSCALL_DEFINE(sync_file_range)(int fd, 
 	}
 
 	if (flags & SYNC_FILE_RANGE_WRITE) {
-		ret = filemap_fdatawrite_range(mapping, offset, endbyte);
+		ret = __filemap_fdatawrite_range(mapping, offset, endbyte, WB_SYNC_NONE);
 		if (ret < 0)
 			goto out_put;
 	}

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2012-06-06 17:04 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20120528114124.GA6813@localhost>
     [not found] ` <CA+55aFxHt8q8+jQDuoaK=hObX+73iSBTa4bBWodCX3s-y4Q1GQ@mail.gmail.com>
2012-05-29 15:57   ` write-behind on streaming writes Fengguang Wu
2012-05-29 17:35     ` Linus Torvalds
2012-05-30  3:21       ` Fengguang Wu
2012-06-05  1:01         ` Dave Chinner
2012-06-05 17:18           ` Vivek Goyal
2012-06-05 17:23         ` Vivek Goyal
2012-06-05 17:41           ` Vivek Goyal
2012-06-05 18:48             ` Vivek Goyal
2012-06-05 20:10               ` Vivek Goyal
2012-06-06  2:57                 ` Vivek Goyal
2012-06-06  3:14                   ` Linus Torvalds
2012-06-06 12:14                     ` Vivek Goyal
2012-06-06 14:00                       ` Fengguang Wu
2012-06-06 17:04                         ` Vivek Goyal [this message]
2012-06-07  9:45                           ` Jan Kara
2012-06-07 19:06                             ` Vivek Goyal
2012-06-06 16:15                       ` Vivek Goyal
2012-06-06 14:08                   ` Fengguang Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120606170428.GB8133@redhat.com \
    --to=vgoyal@redhat.com \
    --cc=Trond.Myklebust@netapp.com \
    --cc=axboe@kernel.dk \
    --cc=fengguang.wu@intel.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).