From: Jan Kara <jack@suse.cz>
To: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Jan Kara <jack@suse.cz>, Namjae Jeon <linkinjeon@gmail.com>,
fengguang.wu@intel.com, linux-fsdevel@vger.kernel.org,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Namjae Jeon <namjae.jeon@samsung.com>,
Vivek Trivedi <t.vivek@samsung.com>,
Dave Chinner <dchinner@redhat.com>
Subject: Re: [PATCH] writeback: fix writeback cache thrashing
Date: Wed, 2 Jan 2013 14:43:34 +0100 [thread overview]
Message-ID: <20130102134334.GB30633@quack.suse.cz> (raw)
In-Reply-To: <20130101005104.GA23383@hacker.(null)>
On Tue 01-01-13 08:51:04, Wanpeng Li wrote:
> On Mon, Dec 31, 2012 at 12:30:54PM +0100, Jan Kara wrote:
> >On Sun 30-12-12 14:59:50, Namjae Jeon wrote:
> >> From: Namjae Jeon <namjae.jeon@samsung.com>
> >>
> >> Consider Process A: huge I/O on sda
> >> doing heavy write operation - dirty memory becomes more
> >> than dirty_background_ratio
> >> on HDD - flusher thread flush-8:0
> >>
> >> Consider Process B: small I/O on sdb
> >> doing while [1]; read 1024K + rewrite 1024K + sleep 2sec
> >> on Flash device - flusher thread flush-8:16
> >>
> >> As Process A is a heavy dirtier, dirty memory becomes more
> >> than dirty_background_thresh. Due to this, below check becomes
> >> true(checking global_page_state in over_bground_thresh)
> >> for all bdi devices(even for very small dirtied bdi - sdb):
> >>
> >> In this case, even small cached data on 'sdb' is forced to flush
> >> and writeback cache thrashing happens.
> >>
> >> When we added debug prints inside above 'if' condition and ran
> >> above Process A(heavy dirtier on bdi with flush-8:0) and
> >> Process B(1024K frequent read/rewrite on bdi with flush-8:16)
> >> we got below prints:
> >>
> >> [Test setup: ARM dual core CPU, 512 MB RAM]
> >>
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 56064 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 56704 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 84720 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 94720 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 384 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 960 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 64 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 92160 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 256 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 768 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 64 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 256 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 320 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 0 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 92032 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 91968 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 192 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 1024 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 64 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 192 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 576 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 0 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 84352 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 192 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 512 KB
> >> [over_bground_thresh]: wakeup flush-8:16 : BDI_RECLAIMABLE = 0 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 92608 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 92544 KB
> >>
> >> As mentioned in above log, when global dirty memory > global background_thresh
> >> small cached data is also forced to flush by flush-8:16.
> >>
> >> If removing global background_thresh checking code, we can reduce cache
> >> thrashing of frequently used small data.
> > It's not completely clear to me:
> > Why is this a problem? Wearing of the flash? Power consumption? I'd like
> >to understand this before changing the code...
> >
> >> And It will be great if we can reserve a portion of writeback cache using
> >> min_ratio.
> >>
> >> After applying patch:
> >> $ echo 5 > /sys/block/sdb/bdi/min_ratio
> >> $ cat /sys/block/sdb/bdi/min_ratio
> >> 5
> >>
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 56064 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 56704 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 84160 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 96960 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 94080 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 93120 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 93120 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 91520 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 89600 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 93696 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 93696 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 72960 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 90624 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 90624 KB
> >> [over_bground_thresh]: wakeup flush-8:0 : BDI_RECLAIMABLE = 90688 KB
> >>
> >> As mentioned in the above logs, once cache is reserved for Process B,
> >> and patch is applied there is less writeback cache thrashing on sdb
> >> by frequent forced writeback by flush-8:16 in over_bground_thresh.
> >>
> >> After all, small cached data will be flushed by periodic writeback
> >> once every dirty_writeback_interval.
> > OK, in principle something like this makes sence to me. But if there are
> >more BDIs which are roughly equally used, it could happen none of them are
> >over threshold due to percpu counter & rounding errors. So I'd rather
> >change the conditions to something like:
> > reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
> > bdi_bground_thresh = bdi_dirty_limit(bdi, background_thresh);
> >
> > if (reclaimable > bdi_bground_thresh)
> > return true;
> > /*
> > * If global background limit is exceeded, kick the writeback on
> > * BDI if there's a reasonable amount of data to write (at least
> > * 1/2 of BDI's background dirty limit).
> > */
> > if (global_page_state(NR_FILE_DIRTY) +
> > global_page_state(NR_UNSTABLE_NFS) > background_thresh &&
> > reclaimable * 2 > bdi_bground_thresh)
> > return true;
> >
>
> Hi Jan,
>
> If there are enough BDIs and percpu counter of each bdi roughly equally
> used less than 1/2 of BDI's background dirty limit, still nothing will
> be flushed even if over global background_thresh.
Yes, although then the percpu counter error would have to be quite big.
Anyway, we can change the last condition to:
if (global_page_state(NR_FILE_DIRTY) +
global_page_state(NR_UNSTABLE_NFS) > background_thresh &&
reclaimable * 2 + bdi_stat_error(bdi) * 2 > bdi_bground_thresh)
That should be safe and for machines with resonable number of CPUs it
should save the wakeup as well.
Honza
> >> Suggested-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
> >> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
> >> Signed-off-by: Vivek Trivedi <t.vivek@samsung.com>
> >> Cc: Fengguang Wu <fengguang.wu@intel.com>
> >> Cc: Jan Kara <jack@suse.cz>
> >> Cc: Dave Chinner <dchinner@redhat.com>
> >> ---
> >> fs/fs-writeback.c | 4 ----
> >> 1 file changed, 4 deletions(-)
> >>
> >> diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
> >> index 310972b..070b773 100644
> >> --- a/fs/fs-writeback.c
> >> +++ b/fs/fs-writeback.c
> >> @@ -756,10 +756,6 @@ static bool over_bground_thresh(struct backing_dev_info *bdi)
> >>
> >> global_dirty_limits(&background_thresh, &dirty_thresh);
> >>
> >> - if (global_page_state(NR_FILE_DIRTY) +
> >> - global_page_state(NR_UNSTABLE_NFS) > background_thresh)
> >> - return true;
> >> -
> >> if (bdi_stat(bdi, BDI_RECLAIMABLE) >
> >> bdi_dirty_limit(bdi, background_thresh))
> >> return true;
> >> --
> >> 1.7.9.5
> >>
> >--
> >Jan Kara <jack@suse.cz>
> >SUSE Labs, CR
> >
> >--
> >To unsubscribe, send a message with 'unsubscribe linux-mm' in
> >the body to majordomo@kvack.org. For more info on Linux MM,
> >see: http://www.linux-mm.org/ .
> >Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
>
--
Jan Kara <jack@suse.cz>
SUSE Labs, CR
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2013-01-02 13:43 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-30 5:59 [PATCH] writeback: fix writeback cache thrashing Namjae Jeon
2012-12-31 11:30 ` Jan Kara
2013-01-01 0:51 ` Wanpeng Li
[not found] ` <20130101005104.GA23383@hacker.(null)>
2013-01-02 13:43 ` Jan Kara [this message]
2013-01-03 4:35 ` Namjae Jeon
2013-01-04 0:59 ` Simon Jeons
2013-01-04 7:41 ` Namjae Jeon
2013-01-05 0:46 ` Simon Jeons
2013-01-05 3:26 ` Fengguang Wu
2013-01-05 5:26 ` Simon Jeons
2013-01-05 7:38 ` Fengguang Wu
2013-01-05 9:41 ` Simon Jeons
2013-01-05 9:55 ` Fengguang Wu
2013-01-05 3:18 ` Fengguang Wu
2013-01-09 8:26 ` Namjae Jeon
2013-01-09 15:13 ` Jan Kara
2013-01-10 2:50 ` Wanpeng Li
2013-01-10 11:58 ` Namjae Jeon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130102134334.GB30633@quack.suse.cz \
--to=jack@suse.cz \
--cc=dchinner@redhat.com \
--cc=fengguang.wu@intel.com \
--cc=linkinjeon@gmail.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=liwanp@linux.vnet.ibm.com \
--cc=namjae.jeon@samsung.com \
--cc=t.vivek@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).