From: kardan <kardan@riseup.net>
To: linux-ext4@vger.kernel.org, linux-fsdevel@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: BUG: kernel panic after jbd bugs / kernel paging request
Date: Tue, 20 Aug 2013 08:49:29 +0200 [thread overview]
Message-ID: <20130820084929.4094d5c3@delight> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 5230 bytes --]
Dear developers,
At first thanks for all your work!
kernel version: 3.9.9-t23
kernel config: https://paste.debian.net/27351/
lspci -nvv output is attached.
I merged two kernel issues into one mail to find relations easier.
As both appeared only once I did not invest more time to try with
newer kernels. But I will do so for testing patches. Please give me
pointers where to dig in for reproducing.
1) jbd2_journal_dirty_metadata
I reported this in #linuxfs and was confirmed to forward it here.
12:55 < kardan:#linuxfs> it seems like my hdd is hanging (hdd led
turned. jbd is buzy for over an hour now:
1326 be/3 root 0.00 B 16.00 K 0.00 % 98.47 % [jbd2/sda1-8]
The load was caused by iceape (or something stacked below)
#1 0xb764680e in wait4 () at ../sysdeps/unix/syscall-template.S:81
#2 0xb76467e7 in __wait3 (stat_loc=..., options=0, usage=0x0)
at ../sysdeps/unix/bsd/bsd4.4/wait3.c:3312:55
This led to several jbd related kernel bugs and a kernel panic in
the end. I attached the jbd-schedulings-bugs to avoid wrapping issues.
jbd2_journal_dirty_metadata+0x162/0x188
kmem_cache_alloc+0x26/0x9f
spin_unlock.isra.6+0x1e/0x1e
ext4_file_open+0x13e/0x1b2
spin_lock.isra.7+0xa/0xb
__d_instantiate+0x59/0x63
fsnotify_perm+0x4d/0x58
__schedule_bug+0x39/0x49
__schedule+0x54/0x4e4
ttwu_do_wakeup.constprop.111+0x39/0x56
try_to_wake_up+0xe7/0xef
autoremove_wake_function+0xd/0x29
activate_page+0xae/0xfc
__cond_resched+0xf/0x19
_cond_resched+0x10/0x18
Aug 15 18:06:10 delight
unmap_single_vma+0x3fc/0x49c
unmap_vmas+0x30/0x4d
exit_mmap+0x68/0xcb
get_signal_to_deliver+0x202/0x4d1
kmem_cache_alloc+0x26/0x9f
spin_unlock.isra.6+0x1e/0x1e
ext4_file_open+0x13e/0x1b2
fsnotify+0x1fa/0x22c
__d_instantiate+0x59/0x63
__schedule_bug+0x39/0x49
_schedule+0x54/0x4e4
blk_peek_request+0x16f/0x1a4
scsi_request_fn+0x35d/0x3fe
activate_page+0xae/0xfc
__cond_resched+0xf/0x19
_cond_resched+0x10/0x18
unmap_single_vma+0x3fc/0x49c
unmap_vmas+0x30/0x4d
exit_mmap+0x68/0xcb
get_signal_to_deliver+0x202/0x4d1
__schedule_bug+0x39/0x49
__schedule+0x54/0x4e4
__free_one_page+0xeb/0x1c4
free_pcppages_bulk+0xbb/0x103
__cond_resched+0xf/0x19
_cond_resched+0x10/0x18
unmap_single_vma+0x3fc/0x49c
unmap_vmas+0x30/0x4d
exit_mmap+0x68/0xcb
get_signal_to_deliver+0x202/0x4d1
__schedule_bug+0x39/0x49
__schedule+0x54/0x4e4
smp_apic_timer_interrupt+0x58/0x60
apic_timer_interrupt+0x34/0x3c
activate_page+0xae/0xfc
__cond_resched+0xf/0x19
_cond_resched+0x10/0x18
unmap_single_vma+0x3fc/0x49c
unmap_vmas+0x30/0x4d
exit_mmap+0x68/0xcb
__schedule_bug+0x39/0x49
__schedule+0x54/0x4e4
vm_acct_memory+0x26/0x3c
__cache_free.isra.57+0xf/0x8f
percpu_counter_add.constprop.21+0x26/0x3e
spin_lock.isra.7+0xa/0xb
dput+0x11/0x96
spin_unlock.isra.11+0xa/0x1e
__fput+0x15f/0x17e
mnt_add_count.isra.16+0x1c/0x34
__cond_resched+0xf/0x19
_cond_resched+0x10/0x18
task_work_run+0x4f/0x5a
do_exit+0x2c6/0x796
kmsg_dump+0x1d/0xcc
oops_end+0x86/0x8a
do_bounds+0x4c/0x4c
Full log: https://paste.debian.net/27347/
2) unable to handle kernel paging request
INFO: task kswapd0:21 blocked for more than 120 seconds.
[289200.502665] [<c10b4258>] ? kmem_cache_alloc+0x2f/0x9f
[289200.502677] [<c108b07f>] ? mempool_alloc+0x3b/0xee
[289200.502690] [<c104c01f>] ? timekeeping_get_ns.constprop.
[289200.502703] [<c13310e9>] ? io_schedule+0x34/0x47
[289200.502715] [<c117e062>] ? get_request+0x416/0x4ae
[289200.502728] [<c1005a8f>] ? native_sched_clock+0x48/0x94
[289200.502741] [<c11811f1>] ? ioc_lookup_icq+0x41/0x49
[289800.503037] INFO: task kswapd0:21 blocked for more than 120 seconds.
[289800.503126] [<c104300b>] ? sched_slice.isra.36+0x67/0x85
[289800.503139] [<c104c01f>] ? timekeeping_get_ns.constprop.
[289800.503153] [<c13310e9>] ? io_schedule+0x34/0x47
[289800.503165] [<c117e062>] ? get_request+0x416/0x4ae
[289800.503178] [<c11811f1>] ? ioc_lookup_icq+0x41/0x49
[289800.503189] [<c1038faa>] ? abort_exclusive_wait+0x64/0x64
[289800.503199] [<c117f938>] ? blk_queue_bio+0x185/0x26d
This issue dates back some weeks, sorry for not reporting earlear.
I had two occurances of this with several days in between.
One week before the first occurence a new ram bank and a PCMCIA card
usb hub was added to the laptop.
Some days ago I saw a lot of IO errors once, they did not reappear.
On #linux-fs it was said the first one looks like use-after-free or
some other type of software-induced memory corruption.
"Those tend to be nasty problems that can take months to track down
some of the crazy-looking problems end up as bad hardware.
have you also experienced crashes of userspace programs?"
kswap/kworker were followed by Xorg, iceweasel, claws and Xorg.
Awesome was inresponsive afterwards and I needed the restart lightdm.
In a new X session parts of old windows reappeared, this was
reproducable.
Log is attached.
--
Kardan <kardan@riseup.net>
Encrypt your email: http://gnupg.org/documentation
Public GPG key 9D6108AE58C06558 at hkp://pool.sks-keyservers.net
fpr: F72F C4D9 6A52 16A1 E7C9 AE94 9D61 08AE 58C0 6558
[-- Attachment #1.2: kernel-paging-bug --]
[-- Type: application/octet-stream, Size: 11478 bytes --]
EXT4-fs error (device sdb9): ext4_find_entry:1300: inode #16252947: comm transmission-gt: reading directory lblock 0
EXT4-fs warning (device sdb9): __ext4_read_dirblock:680: error reading directory block (ino 16252959, block 0)
EXT4-fs warning (device sdb9): __ext4_read_dirblock:680: error reading directory block (ino 16252954, block 0)
EXT4-fs warning (device sdb9): __ext4_read_dirblock:907: error reading directory block (ino 2, block 0)
EXT4-fs error (device sdb9): __ext4_get_inode_loc:3852: inode #2: block 1057: comm ls: unable to read itable block
EXT4-fs error (device sdb9) in ext4_reserve_inode_write:4781: IO failure Aborting journal on device sdb9-8.
Buffer I/O error on device sdb9, logical block 95453184
lost page write due to I/O error on sdb9
JBD2: Error -5 detected when updating journal superblock for sdb9-8.
EXT4-fs (sdc9): recovery complete
EXT4-fs (sdc9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs error (device sdb9): __ext4_journal_start_sb:60: Detected aborted journal
EXT4-fs (sdb9): Remounting filesystem read-only
Buffer I/O error on device sdb1, logical block 16402
Buffer I/O error on device sdb1, logical block 16403
Buffer I/O error on device sdb1, logical block 16404
Buffer I/O error on device sdb1, logical block 16405
EXT4-fs (sdb9): error count: 100
EXT4-fs (sdb9): initial error at 1375036676: ext4_find_entry:1300: inode 16252947
EXT4-fs (sdb9): last error at 1375038025: __ext4_journal_start_sb:60: inode 2: block 1057
EXT4-fs warning (device sdb5): __ext4_read_dirblock:907: error reading directory block (ino 2, block 0)
EXT4-fs error (device sdb5): __ext4_get_inode_loc:3852: inode #2: block 481: comm du: unable to read itable block
EXT4-fs error (device sdb5) in ext4_reserve_inode_write:4781: IO failure
quiet_error: 8 callbacks suppressed
Buffer I/O error on device sdb5, logical block 557056
lost page write due to I/O error on sdb5
JBD2: Error -5 detected when updating journal superblock for sdb5-8.
Aborting journal on device sdb5-8.
Buffer I/O error on device sdb5, logical block 557056
lost page write due to I/O error on sdb5
JBD2: Error -5 detected when updating journal superblock for sdb5-8.
EXT4-fs error (device sdb5): ext4_find_entry:1300: inode #2: comm pool: reading directory lblock 0
EXT4-fs warning (device sdb5): __ext4_read_dirblock:907: error reading directory block (ino 2, block 0)
EXT4-fs (sdb5): Remounting filesystem read-only
Buffer I/O error on device dm-0, logical block 0
Buffer I/O error on device dm-0, logical block 5242864
Buffer I/O error on device dm-0, logical block 5242878
Shortly after that
INFO: task kswapd0:21 blocked for more than 120 seconds.
[289200.502665] [<c10b4258>] ? kmem_cache_alloc+0x2f/0x9f
[289200.502677] [<c108b07f>] ? mempool_alloc+0x3b/0xee
[289200.502690] [<c104c01f>] ? timekeeping_get_ns.constprop.15+0x10/0x56
[289200.502703] [<c13310e9>] ? io_schedule+0x34/0x47
[289200.502715] [<c117e062>] ? get_request+0x416/0x4ae
[289200.502728] [<c1005a8f>] ? native_sched_clock+0x48/0x94
[289200.502741] [<c11811f1>] ? ioc_lookup_icq+0x41/0x49
[289200.502751] [<c1038faa>] ? abort_exclusive_wait+0x64/0x64
[289200.502761] [<c117f938>] ? blk_queue_bio+0x185/0x26d
[289200.502770] [<c117e697>] ? generic_make_request+0x77/0xac
[289200.502779] [<c117ecba>] ? submit_bio+0xe0/0x10a
[289200.502789] [<c10de2fe>] ? bio_alloc_bioset+0x64/0xb6
[289200.502804] [<c10db67f>] ? submit_bh+0x154/0x16f
[289200.502814] [<c10dceb9>] ? __block_write_full_page+0x1cc/0x296
[289200.502823] [<c10dedcc>] ? I_BDEV+0x4/0x4
[289200.502833] [<c10dcfd4>] ? block_write_full_page_endio+0x51/0xa9
[289200.502842] [<c10dbae3>] ? sync_mapping_buffers+0x198/0x198
[289200.502850] [<c10dedcc>] ? I_BDEV+0x4/0x4
[289200.502858] [<c10dd036>] ? block_write_full_page+0xa/0xc
[289200.502867] [<c10dbae3>] ? sync_mapping_buffers+0x198/0x198
[289200.502880] [<c109443e>] ? shrink_page_list+0x353/0x5f8
[289200.502891] [<c1094b0a>] ? shrink_inactive_list+0x1ba/0x2f8
[289200.502901] [<c1051ed3>] ? tick_program_event+0x1b/0x1e
[289200.502911] [<c1094f11>] ? shrink_zone+0x2c9/0x3d1
[289200.502920] [<c13355b3>] ? common_interrupt+0x33/0x38
[289200.502931] [<c109541c>] ? kswapd+0x403/0x5cf
[289200.502939] [<c109541c>] ? kswapd+0x403/0x5cf
[289200.502950] [<c1095019>] ? shrink_zone+0x3d1/0x3d1
[289200.502958] [<c10386e1>] ? kthread+0x67/0x6c
[289200.502968] [<c1335077>] ? ret_from_kernel_thread+0x1b/0x28
[289200.502976] [<c103867a>] ? kthread_freezable_should_stop+0x2b/0x2b
[289800.503037] INFO: task kswapd0:21 blocked for more than 120 seconds.
[289800.503126] [<c104300b>] ? sched_slice.isra.36+0x67/0x85
[289800.503139] [<c104c01f>] ? timekeeping_get_ns.constprop.15+0x10/0x56
[289800.503153] [<c13310e9>] ? io_schedule+0x34/0x47
[289800.503165] [<c117e062>] ? get_request+0x416/0x4ae
[289800.503178] [<c11811f1>] ? ioc_lookup_icq+0x41/0x49
[289800.503189] [<c1038faa>] ? abort_exclusive_wait+0x64/0x64
[289800.503199] [<c117f938>] ? blk_queue_bio+0x185/0x26d
[289800.503208] [<c117e697>] ? generic_make_request+0x77/0xac
[289800.503217] [<c117ecba>] ? submit_bio+0xe0/0x10a
[289800.503233] [<c10db67f>] ? submit_bh+0x154/0x16f
[289800.503244] [<c10dceb9>] ? __block_write_full_page+0x1cc/0x296
[289800.503254] [<c10dedcc>] ? I_BDEV+0x4/0x4
[289800.503264] [<c10dcfd4>] ? block_write_full_page_endio+0x51/0xa9
[289800.503273] [<c10dbae3>] ? sync_mapping_buffers+0x198/0x198
[289800.503281] [<c10dedcc>] ? I_BDEV+0x4/0x4
[289800.503290] [<c10dd036>] ? block_write_full_page+0xa/0xc
[289800.503299] [<c10dbae3>] ? sync_mapping_buffers+0x198/0x198
[289800.503313] [<c109443e>] ? shrink_page_list+0x353/0x5f8
[289800.503324] [<c1094b0a>] ? shrink_inactive_list+0x1ba/0x2f8
[289800.503334] [<c1094f11>] ? shrink_zone+0x2c9/0x3d1
[289800.503346] [<c1333bb3>] ? add_preempt_count+0xa/0x69
[289800.503357] [<c109541c>] ? kswapd+0x403/0x5cf
[289800.503365] [<c109541c>] ? kswapd+0x403/0x5cf
[289800.503376] [<c1095019>] ? shrink_zone+0x3d1/0x3d1
[289800.503384] [<c10386e1>] ? kthread+0x67/0x6c
[289800.503395] [<c1335077>] ? ret_from_kernel_thread+0x1b/0x28
[289800.503403] [<c103867a>] ? kthread_freezable_should_stop+0x2b/0x2b
[289974.370373] Disabling lock debugging due to kernel taint
[289974.377177] [drm] Module unloaded
[289974.466009] Process Xorg (pid: 2932, ti=ee0d6000 task=edde7c00 task.ti=ee0d6000)
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.466009] [<c1331ab8>] ? apic_timer_interrupt+0x34/0x3c
[289974.466009] [<c10075f5>] ? save_fsave_header+0x71/0x7d
[289974.466009] [<c10c87b1>] ? core_sys_select+0x109/0x198
[289974.466009] [<c102e506>] ? recalc_sigpending+0xe/0x35
[289974.466009] [<c102ed95>] ? __set_task_blocked+0x61/0x67
[289974.466009] [<c100789e>] ? save_xstate_sig+0xd8/0x1af
[289974.466009] [<c1030478>] ? __set_current_blocked+0x18/0x1f
[289974.466009] [<c102deec>] ? spin_unlock_irq.isra.17+0x1c/0x26
[289974.466009] [<c1030552>] ? signal_delivered+0x41/0x57
[289974.466009] [<c103059e>] ? signal_setup_done+0x36/0x3b
[289974.466009] [<c1002290>] ? do_signal+0x420/0x47f
[289974.466009] [<c104c01f>] ? timekeeping_get_ns.constprop.15+0x10/0x56
[289974.466009] [<c104c630>] ? ktime_get_ts+0x30/0x77
[289974.466009] [<c10c7f89>] ? poll_select_copy_remaining+0xd1/0xe3
[289974.466009] [<c10c88a0>] ? sys_select+0x60/0x88
[289974.466009] [<c1335101>] ? sysenter_do_call+0x12/0x22
[289974.792955] BUG: unable to handle kernel paging request at f0dbb054
[289974.793010] Process Xorg (pid: 2932, ti=ee0d6000 task=edde7c00 task.ti=ee0d6000)
[289974.793010] [<c10cd688>] ? put_files_struct+0x5b/0xa3
[289974.793010] [<c1026122>] ? do_exit+0x2ba/0x796
[289974.793010] [<c1024a6c>] ? kmsg_dump+0x1d/0xcc
[289974.793010] [<c13322da>] ? oops_end+0x86/0x8a
[289974.793010] [<c132d736>] ? no_context+0x17e/0x188
[289974.793010] [<c132d825>] ? __bad_area_nosemaphore+0xe5/0xed
[289974.793010] [<c132d837>] ? bad_area_nosemaphore+0xa/0xc
[289974.793010] [<c1333a14>] ? __do_page_fault+0x30b/0x373
[289974.793010] [<c103acae>] ? unlock_hrtimer_base.isra.13+0x1d/0x27
[289974.793010] [<c103b0c8>] ? hrtimer_try_to_cancel+0x62/0x69
[289974.793010] [<c103b0d9>] ? hrtimer_cancel+0xa/0x14
[289974.793010] [<c13306c9>] ? schedule_hrtimeout_range_clock+0xa5/0xd5
[289974.793010] [<c1333a7c>] ? __do_page_fault+0x373/0x373
[289974.793010] [<c1331d15>] ? error_code+0x65/0x6c
[289974.793010] [<c10c0000>] ? count.constprop.30+0x5a/0x5f
[289974.793010] [<c10c84ef>] ? do_select+0x211/0x3ca
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c10c8103>] ? set_restore_sigmask+0x22/0x22
[289974.793010] [<c1331ab8>] ? apic_timer_interrupt+0x34/0x3c
[289974.793010] [<c10075f5>] ? save_fsave_header+0x71/0x7d
[289974.793010] [<c10c87b1>] ? core_sys_select+0x109/0x198
[289974.793010] [<c102e506>] ? recalc_sigpending+0xe/0x35
[289974.793010] [<c102ed95>] ? __set_task_blocked+0x61/0x67
[289974.793010] [<c100789e>] ? save_xstate_sig+0xd8/0x1af
[289974.793010] [<c1030478>] ? __set_current_blocked+0x18/0x1f
[289974.793010] [<c102deec>] ? spin_unlock_irq.isra.17+0x1c/0x26
[289974.793010] [<c1030552>] ? signal_delivered+0x41/0x57
[289974.793010] [<c103059e>] ? signal_setup_done+0x36/0x3b
[289974.793010] [<c1002290>] ? do_signal+0x420/0x47f
[289974.793010] [<c104c01f>] ? timekeeping_get_ns.constprop.15+0x10/0x56
[289974.793010] [<c104c630>] ? ktime_get_ts+0x30/0x77
[289974.793010] [<c10c7f89>] ? poll_select_copy_remaining+0xd1/0xe3
[289974.793010] [<c10c88a0>] ? sys_select+0x60/0x88
[289974.793010] [<c1335101>] ? sysenter_do_call+0x12/0x22
[289974.793010] Fixing recursive fault but reboot is needed!
[290148.171754] [drm] Initialized drm 1.1.0 20060810
[290148.189994] [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0 on minor 0
[-- Attachment #1.3: lspci --]
[-- Type: application/octet-stream, Size: 9666 bytes --]
00:00.0 0600: 8086:3575 (rev 02)
Subsystem: 1014:021d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 0604: 8086:3576 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: e0000000-ebffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1d.0 0c03: 8086:2482 (rev 01) (prog-if 00 [UHCI])
Subsystem: 1014:0220
Physical Slot: 1-1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 0c03: 8086:2484 (rev 01) (prog-if 00 [UHCI])
Subsystem: 1014:0220
Physical Slot: 1-1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 0c03: 8086:2487 (rev 01) (prog-if 00 [UHCI])
Subsystem: 1014:0220
Physical Slot: 1-1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1e.0 0604: 8086:2448 (rev 41) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
I/O behind bridge: 00002000-00006fff
Memory behind bridge: c0200000-cfffffff
Prefetchable memory behind bridge: f0000000-f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 0601: 8086:248c (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
00:1f.1 0101: 8086:248a (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: 1014:0220
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 1860 [size=16]
Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 0c05: 8086:2483 (rev 01)
Subsystem: 1014:0220
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 0401: 8086:2485 (rev 01)
Subsystem: 1014:0222
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Kernel driver in use: snd_intel8x0
01:00.0 0300: 5333:8c2e (rev 05) (prog-if 00 [VGA controller])
Subsystem: 1014:01fc
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0100000 (32-bit, non-prefetchable) [size=512K]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Region 3: Memory at e0000000 (32-bit, prefetchable) [size=32M]
[virtual] Expansion ROM at e2000000 [disabled] [size=64K]
Capabilities: <access denied>
02:00.0 0607: 104c:ac51
Subsystem: 1014:023b
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: f0000000-f3ffffff (prefetchable)
Memory window 1: c4000000-c7ffffff
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:00.1 0607: 104c:ac51
Subsystem: 1014:023b
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 51000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
Memory window 0: f4000000-f7ffffff (prefetchable)
Memory window 1: c8000000-cbffffff
I/O window 0: 00002800-000028ff
I/O window 1: 00002c00-00002cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
02:02.0 0780: 11c1:0449 (rev 01)
Subsystem: 1468:0410
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0201000 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at 6440 [size=8]
Region 2: I/O ports at 6000 [size=256]
Capabilities: <access denied>
02:08.0 0200: 8086:1031 (rev 41)
Subsystem: 1014:0209
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 6400 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
07:00.0 0c03: 1106:3038 (rev 61) (prog-if 00 [UHCI])
Subsystem: 1106:3038
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 1: Memory at c8000000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 2800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
07:00.1 0c03: 1106:3038 (rev 61) (prog-if 00 [UHCI])
Subsystem: 1106:3038
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 1: Memory at c8000100 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 2820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
07:00.2 0c03: 1106:3104 (rev 63) (prog-if 20 [EHCI])
Subsystem: 1106:3104
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c8000200 (32-bit, non-prefetchable) [size=256]
Region 1: Memory at c8000300 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 620 bytes --]
reply other threads:[~2013-08-20 6:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130820084929.4094d5c3@delight \
--to=kardan@riseup.net \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).