From: Jan Kara <jack@suse.cz>
To: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: linux-fsdevel@vger.kernel.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org, willy@linux.intel.com
Subject: Re: [PATCH v7 17/22] Get rid of most mentions of XIP in ext2
Date: Wed, 9 Apr 2014 12:04:35 +0200 [thread overview]
Message-ID: <20140409100435.GJ32103@quack.suse.cz> (raw)
In-Reply-To: <0b13a744db9bfca33938bc1576f7eb7bfc9c41c2.1395591795.git.matthew.r.wilcox@intel.com>
On Sun 23-03-14 15:08:43, Matthew Wilcox wrote:
> The only remaining usage is userspace's 'xip' option.
Looks good. You can add:
Reviewed-by: Jan Kara <jack@suse.cz>
Honza
> ---
> fs/ext2/ext2.h | 6 +++---
> fs/ext2/file.c | 2 +-
> fs/ext2/inode.c | 6 +++---
> fs/ext2/namei.c | 8 ++++----
> fs/ext2/super.c | 16 ++++++++--------
> 5 files changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h
> index b8b1c11..0e1fe9d 100644
> --- a/fs/ext2/ext2.h
> +++ b/fs/ext2/ext2.h
> @@ -381,9 +381,9 @@ struct ext2_inode {
> #define EXT2_MOUNT_XATTR_USER 0x004000 /* Extended user attributes */
> #define EXT2_MOUNT_POSIX_ACL 0x008000 /* POSIX Access Control Lists */
> #ifdef CONFIG_FS_DAX
> -#define EXT2_MOUNT_XIP 0x010000 /* Execute in place */
> +#define EXT2_MOUNT_DAX 0x010000 /* Direct Access */
> #else
> -#define EXT2_MOUNT_XIP 0
> +#define EXT2_MOUNT_DAX 0
> #endif
> #define EXT2_MOUNT_USRQUOTA 0x020000 /* user quota */
> #define EXT2_MOUNT_GRPQUOTA 0x040000 /* group quota */
> @@ -789,7 +789,7 @@ extern int ext2_fsync(struct file *file, loff_t start, loff_t end,
> int datasync);
> extern const struct inode_operations ext2_file_inode_operations;
> extern const struct file_operations ext2_file_operations;
> -extern const struct file_operations ext2_xip_file_operations;
> +extern const struct file_operations ext2_dax_file_operations;
>
> /* inode.c */
> extern const struct address_space_operations ext2_aops;
> diff --git a/fs/ext2/file.c b/fs/ext2/file.c
> index ae7f000..f9bcb9b 100644
> --- a/fs/ext2/file.c
> +++ b/fs/ext2/file.c
> @@ -110,7 +110,7 @@ const struct file_operations ext2_file_operations = {
> };
>
> #ifdef CONFIG_FS_DAX
> -const struct file_operations ext2_xip_file_operations = {
> +const struct file_operations ext2_dax_file_operations = {
> .llseek = generic_file_llseek,
> .read = do_sync_read,
> .write = do_sync_write,
> diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
> index 7ca76da..3776063 100644
> --- a/fs/ext2/inode.c
> +++ b/fs/ext2/inode.c
> @@ -1285,7 +1285,7 @@ void ext2_set_inode_flags(struct inode *inode)
> inode->i_flags |= S_NOATIME;
> if (flags & EXT2_DIRSYNC_FL)
> inode->i_flags |= S_DIRSYNC;
> - if (test_opt(inode->i_sb, XIP))
> + if (test_opt(inode->i_sb, DAX))
> inode->i_flags |= S_DAX;
> }
>
> @@ -1387,9 +1387,9 @@ struct inode *ext2_iget (struct super_block *sb, unsigned long ino)
>
> if (S_ISREG(inode->i_mode)) {
> inode->i_op = &ext2_file_inode_operations;
> - if (test_opt(inode->i_sb, XIP)) {
> + if (test_opt(inode->i_sb, DAX)) {
> inode->i_mapping->a_ops = &ext2_aops;
> - inode->i_fop = &ext2_xip_file_operations;
> + inode->i_fop = &ext2_dax_file_operations;
> } else if (test_opt(inode->i_sb, NOBH)) {
> inode->i_mapping->a_ops = &ext2_nobh_aops;
> inode->i_fop = &ext2_file_operations;
> diff --git a/fs/ext2/namei.c b/fs/ext2/namei.c
> index 0db888c..148f6e3 100644
> --- a/fs/ext2/namei.c
> +++ b/fs/ext2/namei.c
> @@ -104,9 +104,9 @@ static int ext2_create (struct inode * dir, struct dentry * dentry, umode_t mode
> return PTR_ERR(inode);
>
> inode->i_op = &ext2_file_inode_operations;
> - if (test_opt(inode->i_sb, XIP)) {
> + if (test_opt(inode->i_sb, DAX)) {
> inode->i_mapping->a_ops = &ext2_aops;
> - inode->i_fop = &ext2_xip_file_operations;
> + inode->i_fop = &ext2_dax_file_operations;
> } else if (test_opt(inode->i_sb, NOBH)) {
> inode->i_mapping->a_ops = &ext2_nobh_aops;
> inode->i_fop = &ext2_file_operations;
> @@ -125,9 +125,9 @@ static int ext2_tmpfile(struct inode *dir, struct dentry *dentry, umode_t mode)
> return PTR_ERR(inode);
>
> inode->i_op = &ext2_file_inode_operations;
> - if (test_opt(inode->i_sb, XIP)) {
> + if (test_opt(inode->i_sb, DAX)) {
> inode->i_mapping->a_ops = &ext2_aops;
> - inode->i_fop = &ext2_xip_file_operations;
> + inode->i_fop = &ext2_dax_file_operations;
> } else if (test_opt(inode->i_sb, NOBH)) {
> inode->i_mapping->a_ops = &ext2_nobh_aops;
> inode->i_fop = &ext2_file_operations;
> diff --git a/fs/ext2/super.c b/fs/ext2/super.c
> index fdcacf7..8062373 100644
> --- a/fs/ext2/super.c
> +++ b/fs/ext2/super.c
> @@ -288,7 +288,7 @@ static int ext2_show_options(struct seq_file *seq, struct dentry *root)
> #endif
>
> #ifdef CONFIG_FS_DAX
> - if (sbi->s_mount_opt & EXT2_MOUNT_XIP)
> + if (sbi->s_mount_opt & EXT2_MOUNT_DAX)
> seq_puts(seq, ",xip");
> #endif
>
> @@ -393,7 +393,7 @@ enum {
> Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic,
> Opt_err_ro, Opt_nouid32, Opt_nocheck, Opt_debug,
> Opt_oldalloc, Opt_orlov, Opt_nobh, Opt_user_xattr, Opt_nouser_xattr,
> - Opt_acl, Opt_noacl, Opt_xip, Opt_ignore, Opt_err, Opt_quota,
> + Opt_acl, Opt_noacl, Opt_dax, Opt_ignore, Opt_err, Opt_quota,
> Opt_usrquota, Opt_grpquota, Opt_reservation, Opt_noreservation
> };
>
> @@ -421,7 +421,7 @@ static const match_table_t tokens = {
> {Opt_nouser_xattr, "nouser_xattr"},
> {Opt_acl, "acl"},
> {Opt_noacl, "noacl"},
> - {Opt_xip, "xip"},
> + {Opt_dax, "xip"},
> {Opt_grpquota, "grpquota"},
> {Opt_ignore, "noquota"},
> {Opt_quota, "quota"},
> @@ -548,9 +548,9 @@ static int parse_options(char *options, struct super_block *sb)
> "(no)acl options not supported");
> break;
> #endif
> - case Opt_xip:
> + case Opt_dax:
> #ifdef CONFIG_FS_DAX
> - set_opt (sbi->s_mount_opt, XIP);
> + set_opt (sbi->s_mount_opt, DAX);
> #else
> ext2_msg(sb, KERN_INFO, "xip option not supported");
> #endif
> @@ -896,7 +896,7 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent)
>
> blocksize = BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size);
>
> - if (sbi->s_mount_opt & EXT2_MOUNT_XIP) {
> + if (sbi->s_mount_opt & EXT2_MOUNT_DAX) {
> if (blocksize != PAGE_SIZE) {
> ext2_msg(sb, KERN_ERR,
> "error: unsupported blocksize for xip");
> @@ -1275,10 +1275,10 @@ static int ext2_remount (struct super_block * sb, int * flags, char * data)
> ((sbi->s_mount_opt & EXT2_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
>
> es = sbi->s_es;
> - if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT2_MOUNT_XIP) {
> + if ((sbi->s_mount_opt ^ old_opts.s_mount_opt) & EXT2_MOUNT_DAX) {
> ext2_msg(sb, KERN_WARNING, "warning: refusing change of "
> "xip flag with busy inodes while remounting");
> - sbi->s_mount_opt ^= EXT2_MOUNT_XIP;
> + sbi->s_mount_opt ^= EXT2_MOUNT_DAX;
> }
> if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) {
> spin_unlock(&sbi->s_lock);
> --
> 1.9.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Jan Kara <jack@suse.cz>
SUSE Labs, CR
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-04-09 10:04 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-23 19:08 [PATCH v7 00/22] Support ext4 on NV-DIMMs Matthew Wilcox
2014-03-23 19:08 ` [PATCH v7 01/22] Fix XIP fault vs truncate race Matthew Wilcox
2014-03-29 15:57 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 02/22] Allow page fault handlers to perform the COW Matthew Wilcox
2014-04-08 16:34 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 03/22] axonram: Fix bug in direct_access Matthew Wilcox
2014-03-29 16:22 ` Jan Kara
2014-04-02 19:24 ` Matthew Wilcox
2014-03-23 19:08 ` [PATCH v7 04/22] Change direct_access calling convention Matthew Wilcox
2014-03-29 16:30 ` Jan Kara
2014-04-02 19:27 ` Matthew Wilcox
2014-03-23 19:08 ` [PATCH v7 05/22] Introduce IS_DAX(inode) Matthew Wilcox
2014-04-08 15:32 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 06/22] Replace XIP read and write with DAX I/O Matthew Wilcox
2014-04-08 17:56 ` Jan Kara
2014-04-08 20:21 ` Matthew Wilcox
2014-04-09 9:14 ` Jan Kara
2014-04-09 15:19 ` Matthew Wilcox
2014-04-09 20:55 ` Jan Kara
2014-04-13 18:05 ` Matthew Wilcox
2014-04-09 12:04 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 07/22] Replace the XIP page fault handler with the DAX page fault handler Matthew Wilcox
2014-04-08 22:05 ` Jan Kara
2014-04-09 20:48 ` Matthew Wilcox
2014-04-09 21:12 ` Jan Kara
2014-04-13 11:21 ` Matthew Wilcox
2014-04-14 16:04 ` Jan Kara
2014-04-09 10:27 ` Jan Kara
2014-04-09 20:51 ` Matthew Wilcox
2014-04-09 21:43 ` Jan Kara
2014-04-13 18:03 ` Matthew Wilcox
2014-07-29 12:12 ` Matthew Wilcox
2014-07-29 21:04 ` Jan Kara
2014-07-29 21:23 ` Matthew Wilcox
2014-07-30 9:52 ` Jan Kara
2014-07-30 21:02 ` Matthew Wilcox
2014-08-09 11:00 ` Matthew Wilcox
2014-08-11 8:51 ` Jan Kara
2014-08-11 14:13 ` Matthew Wilcox
2014-08-11 14:35 ` Jan Kara
2014-08-11 15:02 ` Matthew Wilcox
2014-08-11 15:25 ` Jan Kara
2014-05-21 20:35 ` Toshi Kani
2014-06-05 22:38 ` Toshi Kani
2014-03-23 19:08 ` [PATCH v7 08/22] Replace xip_truncate_page with dax_truncate_page Matthew Wilcox
2014-04-08 22:17 ` Jan Kara
2014-04-09 9:26 ` Jan Kara
2014-04-13 19:07 ` Matthew Wilcox
2014-03-23 19:08 ` [PATCH v7 09/22] Remove mm/filemap_xip.c Matthew Wilcox
2014-04-08 18:21 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 10/22] Remove get_xip_mem Matthew Wilcox
2014-04-08 18:20 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 11/22] Replace ext2_clear_xip_target with dax_clear_blocks Matthew Wilcox
2014-04-09 9:46 ` Jan Kara
2014-04-10 14:16 ` Matthew Wilcox
2014-04-10 18:31 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 12/22] ext2: Remove ext2_xip_verify_sb() Matthew Wilcox
2014-04-09 9:52 ` Jan Kara
2014-04-10 14:22 ` Matthew Wilcox
2014-04-10 18:35 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 13/22] ext2: Remove ext2_use_xip Matthew Wilcox
2014-04-09 9:55 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 14/22] ext2: Remove xip.c and xip.h Matthew Wilcox
2014-04-09 9:59 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 15/22] Remove CONFIG_EXT2_FS_XIP and rename CONFIG_FS_XIP to CONFIG_FS_DAX Matthew Wilcox
2014-04-09 9:59 ` Jan Kara
2014-04-10 14:23 ` Matthew Wilcox
2014-03-23 19:08 ` [PATCH v7 16/22] ext2: Remove ext2_aops_xip Matthew Wilcox
2014-04-09 10:02 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 17/22] Get rid of most mentions of XIP in ext2 Matthew Wilcox
2014-04-09 10:04 ` Jan Kara [this message]
2014-04-10 14:26 ` Matthew Wilcox
2014-04-10 18:40 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 18/22] xip: Add xip_zero_page_range Matthew Wilcox
2014-04-09 10:15 ` Jan Kara
2014-04-10 14:27 ` Matthew Wilcox
2014-04-10 18:43 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 19/22] ext4: Make ext4_block_zero_page_range static Matthew Wilcox
2014-03-24 19:11 ` tytso
2014-03-23 19:08 ` [PATCH v7 20/22] ext4: Add DAX functionality Matthew Wilcox
2014-04-09 12:17 ` Jan Kara
2014-03-23 19:08 ` [PATCH v7 21/22] ext4: Fix typos Matthew Wilcox
2014-03-24 19:16 ` tytso
2014-03-23 19:08 ` [PATCH v7 22/22] brd: Rename XIP to DAX Matthew Wilcox
2014-04-09 10:07 ` Jan Kara
2014-05-18 14:58 ` [PATCH v7 00/22] Support ext4 on NV-DIMMs Boaz Harrosh
2014-05-18 23:24 ` Matthew Wilcox
2014-06-17 18:11 ` Boaz Harrosh
2014-06-17 18:19 ` Matthew Wilcox
2014-06-17 18:39 ` Boaz Harrosh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140409100435.GJ32103@quack.suse.cz \
--to=jack@suse.cz \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=matthew.r.wilcox@intel.com \
--cc=willy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).