linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jan Kara <jack@suse.cz>
To: Josef Bacik <jbacik@fb.com>
Cc: linux-fsdevel@vger.kernel.org, kernel-team@fb.com,
	viro@ZenIV.linux.org.uk, hch@infradead.org, david@fromorbit.com,
	jack@suse.cz, Dave Chinner <dchinner@redhat.com>
Subject: Re: [PATCH 6/8 V4] bdi: add a new writeback list for sync
Date: Fri, 19 Jun 2015 10:38:39 +0200	[thread overview]
Message-ID: <20150619083839.GA10861@quack.suse.cz> (raw)
In-Reply-To: <1434665923-15001-1-git-send-email-jbacik@fb.com>

On Thu 18-06-15 15:18:43, Josef Bacik wrote:
> From: Dave Chinner <dchinner@redhat.com>
> 
> wait_sb_inodes() current does a walk of all inodes in the filesystem
> to find dirty one to wait on during sync. This is highly
> inefficient and wastes a lot of CPU when there are lots of clean
> cached inodes that we don't need to wait on.
> 
> To avoid this "all inode" walk, we need to track inodes that are
> currently under writeback that we need to wait for. We do this by
> adding inodes to a writeback list on the bdi when the mapping is
> first tagged as having pages under writeback.  wait_sb_inodes() can
> then walk this list of "inodes under IO" and wait specifically just
> for the inodes that the current sync(2) needs to wait for.
> 
> To avoid needing all the realted locking to be safe against
> interrupts, Jan Kara suggested that we be lazy about removal from
> the writeback list. That is, we don't remove inodes from the
> writeback list on IO completion, but do it directly during a
> wait_sb_inodes() walk.
> 
> This means that the a rare sync(2) call will have some work to do
> skipping clean inodes However, in the current problem case of
> concurrent sync workloads, concurrent wait_sb_inodes() calls only
> walk the very recently dispatched inodes and hence should have very
> little work to do.
> 
> This also means that we have to remove the inodes from the writeback
> list during eviction. Do this in inode_wait_for_writeback() once
> all writeback on the inode is complete.
> 
> Signed-off-by: Dave Chinner <dchinner@redhat.com>
> Signed-off-by: Josef Bacik <jbacik@fb.com>
> Tested-by: Dave Chinner <dchinner@redhat.com>
  Looks good. You can add:
Reviewed-by: Jan Kara <jack@suse.cz>

								Honza

> ---
> V3->V4:
> -added bdi_clear_inode_writeback to kill_bdev.
> -added BUG_ON(!list_emtpy(&inode->i_wb_list)) to inode_wait_writeback
> -clarified the comment in inode_wait_writeback
> -fixed some indenting
> 
>  fs/block_dev.c              |   2 +
>  fs/fs-writeback.c           | 136 ++++++++++++++++++++++++++++++++++----------
>  fs/inode.c                  |   1 +
>  include/linux/backing-dev.h |   5 ++
>  include/linux/fs.h          |   1 +
>  mm/backing-dev.c            |   1 +
>  mm/page-writeback.c         |  14 +++++
>  7 files changed, 131 insertions(+), 29 deletions(-)
> 
> diff --git a/fs/block_dev.c b/fs/block_dev.c
> index f2a89be..2726ff1 100644
> --- a/fs/block_dev.c
> +++ b/fs/block_dev.c
> @@ -64,6 +64,8 @@ void kill_bdev(struct block_device *bdev)
>  {
>  	struct address_space *mapping = bdev->bd_inode->i_mapping;
>  
> +	bdi_clear_inode_writeback(inode_to_bdi(bdev->bd_inode),
> +				  bdev->bd_inode);
>  	if (mapping->nrpages == 0 && mapping->nrshadows == 0)
>  		return;
>  
> diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
> index aa72536..3958772 100644
> --- a/fs/fs-writeback.c
> +++ b/fs/fs-writeback.c
> @@ -210,6 +210,34 @@ void inode_wb_list_del(struct inode *inode)
>  }
>  
>  /*
> + * mark an inode as under writeback on the given bdi
> + */
> +void bdi_mark_inode_writeback(struct backing_dev_info *bdi, struct inode *inode)
> +{
> +	WARN_ON_ONCE(bdi != inode_to_bdi(inode));
> +	if (list_empty(&inode->i_wb_list)) {
> +		spin_lock(&bdi->wb.list_lock);
> +		if (list_empty(&inode->i_wb_list))
> +			list_add_tail(&inode->i_wb_list, &bdi->wb.b_writeback);
> +		spin_unlock(&bdi->wb.list_lock);
> +	}
> +}
> +
> +/*
> + * clear an inode as under writeback on the given bdi
> + */
> +void bdi_clear_inode_writeback(struct backing_dev_info *bdi,
> +			       struct inode *inode)
> +{
> +	WARN_ON_ONCE(bdi != inode_to_bdi(inode));
> +	if (!list_empty(&inode->i_wb_list)) {
> +		spin_lock(&bdi->wb.list_lock);
> +		list_del_init(&inode->i_wb_list);
> +		spin_unlock(&bdi->wb.list_lock);
> +	}
> +}
> +
> +/*
>   * Redirty an inode: set its when-it-was dirtied timestamp and move it to the
>   * furthest end of its superblock's dirty-inode list.
>   *
> @@ -383,13 +411,28 @@ static void __inode_wait_for_writeback(struct inode *inode)
>  }
>  
>  /*
> - * Wait for writeback on an inode to complete. Caller must have inode pinned.
> + * Wait for writeback on an inode to complete during eviction. Caller must have
> + * inode pinned.
>   */
>  void inode_wait_for_writeback(struct inode *inode)
>  {
> +	BUG_ON(!(inode->i_state & I_FREEING));
> +
>  	spin_lock(&inode->i_lock);
>  	__inode_wait_for_writeback(inode);
>  	spin_unlock(&inode->i_lock);
> +
> +	/*
> +	 * For a bd_inode when we do inode_to_bdi we'll want to get the bdev for
> +	 * the inode and then deref bdev->bd_disk, which at this point has been
> +	 * set to NULL, so we would panic.  At the point we are dropping our
> +	 * bd_inode we won't have any pages under writeback on the device so
> +	 * this is safe.  But just in case we'll assert to make sure we don't
> +	 * screw this up.
> +	 */
> +	if (!sb_is_blkdev_sb(inode->i_sb))
> +		bdi_clear_inode_writeback(inode_to_bdi(inode), inode);
> +	BUG_ON(!list_empty(&inode->i_wb_list));
>  }
>  
>  /*
> @@ -1372,7 +1415,8 @@ EXPORT_SYMBOL(__mark_inode_dirty);
>   */
>  static void wait_sb_inodes(struct super_block *sb)
>  {
> -	struct inode *inode, *old_inode = NULL;
> +	struct backing_dev_info *bdi = sb->s_bdi;
> +	LIST_HEAD(sync_list);
>  
>  	/*
>  	 * We need to be protected against the filesystem going from
> @@ -1380,48 +1424,82 @@ static void wait_sb_inodes(struct super_block *sb)
>  	 */
>  	WARN_ON(!rwsem_is_locked(&sb->s_umount));
>  
> -	mutex_lock(&sb->s_sync_lock);
> -	spin_lock(&sb->s_inode_list_lock);
> -
>  	/*
> -	 * Data integrity sync. Must wait for all pages under writeback,
> -	 * because there may have been pages dirtied before our sync
> -	 * call, but which had writeout started before we write it out.
> -	 * In which case, the inode may not be on the dirty list, but
> -	 * we still have to wait for that writeout.
> +	 * Data integrity sync. Must wait for all pages under writeback, because
> +	 * there may have been pages dirtied before our sync call, but which had
> +	 * writeout started before we write it out.  In which case, the inode
> +	 * may not be on the dirty list, but we still have to wait for that
> +	 * writeout.
> +	 *
> +	 * To avoid syncing inodes put under IO after we have started here,
> +	 * splice the io list to a temporary list head and walk that. Newly
> +	 * dirtied inodes will go onto the primary list so we won't wait for
> +	 * them. This is safe to do as we are serialised by the s_sync_lock,
> +	 * so we'll complete processing the complete list before the next
> +	 * sync operation repeats the splice-and-walk process.
> +	 *
> +	 * Inodes that have pages under writeback after we've finished the wait
> +	 * may or may not be on the primary list. They had pages under put IO
> +	 * after we started our wait, so we need to make sure the next sync or
> +	 * IO completion treats them correctly, Move them back to the primary
> +	 * list and restart the walk.
> +	 *
> +	 * Inodes that are clean after we have waited for them don't belong on
> +	 * any list, so simply remove them from the sync list and move onwards.
>  	 */
> -	list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
> +	mutex_lock(&sb->s_sync_lock);
> +	spin_lock(&bdi->wb.list_lock);
> +	list_splice_init(&bdi->wb.b_writeback, &sync_list);
> +
> +	while (!list_empty(&sync_list)) {
> +		struct inode *inode = list_first_entry(&sync_list, struct inode,
> +						       i_wb_list);
>  		struct address_space *mapping = inode->i_mapping;
>  
> +		/*
> +		 * We are lazy on IO completion and don't remove inodes from the
> +		 * list when they are clean. Detect that immediately and skip
> +		 * inodes we don't ahve to wait on.
> +		 */
> +		if (!mapping_tagged(mapping, PAGECACHE_TAG_WRITEBACK)) {
> +			list_del_init(&inode->i_wb_list);
> +			cond_resched_lock(&bdi->wb.list_lock);
> +			continue;
> +		}
> +
>  		spin_lock(&inode->i_lock);
> -		if ((inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) ||
> -		    (mapping->nrpages == 0)) {
> +		if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) {
> +			list_move(&inode->i_wb_list, &bdi->wb.b_writeback);
>  			spin_unlock(&inode->i_lock);
> +			cond_resched_lock(&bdi->wb.list_lock);
>  			continue;
>  		}
>  		__iget(inode);
>  		spin_unlock(&inode->i_lock);
> -		spin_unlock(&sb->s_inode_list_lock);
> -
> -		/*
> -		 * We hold a reference to 'inode' so it couldn't have been
> -		 * removed from s_inodes list while we dropped the
> -		 * s_inode_list_lock.  We cannot iput the inode now as we can
> -		 * be holding the last reference and we cannot iput it under
> -		 * s_inode_list_lock. So we keep the reference and iput it
> -		 * later.
> -		 */
> -		iput(old_inode);
> -		old_inode = inode;
> +		spin_unlock(&bdi->wb.list_lock);
>  
>  		filemap_fdatawait(mapping);
> -
>  		cond_resched();
>  
> -		spin_lock(&sb->s_inode_list_lock);
> +		/*
> +		 * the inode has been written back now, so check whether we
> +		 * still have pages under IO and move it back to the primary
> +		 * list if necessary.  We really need the mapping->tree_lock
> +		 * here because bdi_mark_inode_writeback may have not done
> +		 * anything because we were on the spliced list and we need to
> +		 * check TAG_WRITEBACK.
> +		 */
> +		spin_lock_irq(&mapping->tree_lock);
> +		spin_lock(&bdi->wb.list_lock);
> +		if (mapping_tagged(mapping, PAGECACHE_TAG_WRITEBACK)) {
> +			WARN_ON(list_empty(&inode->i_wb_list));
> +			list_move(&inode->i_wb_list, &bdi->wb.b_writeback);
> +                } else
> +			list_del_init(&inode->i_wb_list);
> +		spin_unlock_irq(&mapping->tree_lock);
> +		iput(inode);
>  	}
> -	spin_unlock(&sb->s_inode_list_lock);
> -	iput(old_inode);
> +	spin_unlock(&bdi->wb.list_lock);
>  	mutex_unlock(&sb->s_sync_lock);
>  }
>  
> diff --git a/fs/inode.c b/fs/inode.c
> index c76a575..d1e6598 100644
> --- a/fs/inode.c
> +++ b/fs/inode.c
> @@ -356,6 +356,7 @@ void inode_init_once(struct inode *inode)
>  	INIT_HLIST_NODE(&inode->i_hash);
>  	INIT_LIST_HEAD(&inode->i_devices);
>  	INIT_LIST_HEAD(&inode->i_io_list);
> +	INIT_LIST_HEAD(&inode->i_wb_list);
>  	INIT_LIST_HEAD(&inode->i_lru);
>  	address_space_init_once(&inode->i_data);
>  	i_size_ordered_init(inode);
> diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
> index aff923a..7764d1e 100644
> --- a/include/linux/backing-dev.h
> +++ b/include/linux/backing-dev.h
> @@ -56,6 +56,7 @@ struct bdi_writeback {
>  	struct list_head b_io;		/* parked for writeback */
>  	struct list_head b_more_io;	/* parked for more writeback */
>  	struct list_head b_dirty_time;	/* time stamps are dirty */
> +	struct list_head b_writeback;	/* inodes under writeback */
>  	spinlock_t list_lock;		/* protects the b_* lists */
>  };
>  
> @@ -124,6 +125,10 @@ void bdi_start_background_writeback(struct backing_dev_info *bdi);
>  void bdi_writeback_workfn(struct work_struct *work);
>  int bdi_has_dirty_io(struct backing_dev_info *bdi);
>  void bdi_wakeup_thread_delayed(struct backing_dev_info *bdi);
> +void bdi_mark_inode_writeback(struct backing_dev_info *bdi,
> +			      struct inode *inode);
> +void bdi_clear_inode_writeback(struct backing_dev_info *bdi,
> +			       struct inode *inode);
>  
>  extern spinlock_t bdi_lock;
>  extern struct list_head bdi_list;
> diff --git a/include/linux/fs.h b/include/linux/fs.h
> index f4d56cc..f47792f 100644
> --- a/include/linux/fs.h
> +++ b/include/linux/fs.h
> @@ -637,6 +637,7 @@ struct inode {
>  	struct list_head	i_io_list;	/* backing dev IO list */
>  	struct list_head	i_lru;		/* inode LRU list */
>  	struct list_head	i_sb_list;
> +	struct list_head	i_wb_list;	/* backing dev writeback list */
>  	union {
>  		struct hlist_head	i_dentry;
>  		struct rcu_head		i_rcu;
> diff --git a/mm/backing-dev.c b/mm/backing-dev.c
> index 6e7a644..df31958 100644
> --- a/mm/backing-dev.c
> +++ b/mm/backing-dev.c
> @@ -386,6 +386,7 @@ static void bdi_wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi)
>  	INIT_LIST_HEAD(&wb->b_io);
>  	INIT_LIST_HEAD(&wb->b_more_io);
>  	INIT_LIST_HEAD(&wb->b_dirty_time);
> +	INIT_LIST_HEAD(&wb->b_writeback);
>  	spin_lock_init(&wb->list_lock);
>  	INIT_DELAYED_WORK(&wb->dwork, bdi_writeback_workfn);
>  }
> diff --git a/mm/page-writeback.c b/mm/page-writeback.c
> index eb59f7e..f3751d1 100644
> --- a/mm/page-writeback.c
> +++ b/mm/page-writeback.c
> @@ -2382,11 +2382,25 @@ int __test_set_page_writeback(struct page *page, bool keep_write)
>  		spin_lock_irqsave(&mapping->tree_lock, flags);
>  		ret = TestSetPageWriteback(page);
>  		if (!ret) {
> +			bool on_wblist;
> +
> +			on_wblist = mapping_tagged(mapping,
> +						   PAGECACHE_TAG_WRITEBACK);
> +
>  			radix_tree_tag_set(&mapping->page_tree,
>  						page_index(page),
>  						PAGECACHE_TAG_WRITEBACK);
>  			if (bdi_cap_account_writeback(bdi))
>  				__inc_bdi_stat(bdi, BDI_WRITEBACK);
> +
> +			/*
> +			 * we can come through here when swapping anonymous
> +			 * pages, so we don't necessarily have an inode to
> +			 * track for sync. Inodes are remove lazily, so there is
> +			 * no equivalent in test_clear_page_writeback().
> +			 */
> +			if (!on_wblist && mapping->host)
> +				bdi_mark_inode_writeback(bdi, mapping->host);
>  		}
>  		if (!PageDirty(page))
>  			radix_tree_tag_clear(&mapping->page_tree,
> -- 
> 2.1.0
> 
-- 
Jan Kara <jack@suse.cz>
SUSE Labs, CR

  reply	other threads:[~2015-06-19  8:38 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-11 19:41 [PATCH 0/7] super block scalabilit patches V3 Josef Bacik
2015-06-11 19:41 ` [PATCH 1/8] writeback: plug writeback at a high level Josef Bacik
2015-06-17 12:03   ` Christoph Hellwig
2015-06-11 19:41 ` [PATCH 2/8] inode: add hlist_fake to avoid the inode hash lock in evict Josef Bacik
2015-06-17 12:03   ` Christoph Hellwig
2015-06-11 19:41 ` [PATCH 3/8] inode: convert inode_sb_list_lock to per-sb Josef Bacik
2015-06-17 12:06   ` Christoph Hellwig
2015-06-11 19:41 ` [PATCH 4/8] sync: serialise per-superblock sync operations Josef Bacik
2015-06-17 12:06   ` Christoph Hellwig
2015-06-11 19:41 ` [PATCH 5/8] inode: rename i_wb_list to i_io_list Josef Bacik
2015-06-17 12:06   ` Christoph Hellwig
2015-06-11 19:41 ` [PATCH 6/8] bdi: add a new writeback list for sync Josef Bacik
2015-06-15 14:12   ` Jan Kara
2015-06-16 15:42     ` Josef Bacik
2015-06-17 10:34       ` Jan Kara
2015-06-17 17:55         ` Josef Bacik
2015-06-18  9:28           ` Jan Kara
2015-06-18 22:18   ` [PATCH 6/8 V4] " Josef Bacik
2015-06-19  8:38     ` Jan Kara [this message]
2015-06-11 19:41 ` [PATCH 7/8] writeback: periodically trim the writeback list Josef Bacik
2015-06-11 19:41 ` [PATCH 8/8] inode: don't softlockup when evicting inodes Josef Bacik
2015-06-15 14:16   ` Jan Kara
2015-06-11 20:50 ` [PATCH 0/7] super block scalabilit patches V3 Tejun Heo
2015-06-15 21:34 ` Dave Chinner
2015-06-22  2:26   ` [PATCH] sync: wait_sb_inodes() calls iput() with spinlock held (was Re: [PATCH 0/7] super block scalabilit patches V3) Dave Chinner
2015-06-22 16:21     ` Josef Bacik
2015-06-23 23:14     ` Josef Bacik
2015-06-24  0:35       ` Dave Chinner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150619083839.GA10861@quack.suse.cz \
    --to=jack@suse.cz \
    --cc=david@fromorbit.com \
    --cc=dchinner@redhat.com \
    --cc=hch@infradead.org \
    --cc=jbacik@fb.com \
    --cc=kernel-team@fb.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=viro@ZenIV.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).