linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ross Zwisler <ross.zwisler@linux.intel.com>
To: Jan Kara <jack@suse.cz>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>,
	linux-kernel@vger.kernel.org, Theodore Ts'o <tytso@mit.edu>,
	Alexander Viro <viro@zeniv.linux.org.uk>,
	Andreas Dilger <adilger.kernel@dilger.ca>,
	Andrew Morton <akpm@linux-foundation.org>,
	Dan Williams <dan.j.williams@intel.com>,
	Dave Chinner <david@fromorbit.com>, Jan Kara <jack@suse.com>,
	Matthew Wilcox <willy@linux.intel.com>,
	linux-ext4@vger.kernel.org, linux-fsdevel@vger.kernel.org,
	linux-mm@kvack.org, linux-nvdimm@lists.01.org, xfs@oss.sgi.com
Subject: Re: [PATCH 2/2] dax: move writeback calls into the filesystems
Date: Mon, 8 Feb 2016 09:12:11 -0700	[thread overview]
Message-ID: <20160208161211.GE2343@linux.intel.com> (raw)
In-Reply-To: <20160208104849.GB9451@quack.suse.cz>

On Mon, Feb 08, 2016 at 11:48:50AM +0100, Jan Kara wrote:
> On Sun 07-02-16 00:19:13, Ross Zwisler wrote:
> > Previously calls to dax_writeback_mapping_range() for all DAX filesystems
> > (ext2, ext4 & xfs) were centralized in filemap_write_and_wait_range().
> > dax_writeback_mapping_range() needs a struct block_device, and it used to
> > get that from inode->i_sb->s_bdev.  This is correct for normal inodes
> > mounted on ext2, ext4 and XFS filesystems, but is incorrect for DAX raw
> > block devices and for XFS real-time files.
> > 
> > Instead, call dax_writeback_mapping_range() directly from the filesystem or
> > raw block device fsync/msync code so that they can supply us with a valid
> > block device.
> > 
> > It should be noted that this will reduce the number of calls to
> > dax_writeback_mapping_range() because filemap_write_and_wait_range() is
> > called in the various filesystems for operations other than just
> > fsync/msync.  Both ext4 & XFS call filemap_write_and_wait_range() outside
> > of ->fsync for hole punch, truncate, and block relocation
> > (xfs_shift_file_space() && ext4_collapse_range()/ext4_insert_range()).
> > 
> > I don't believe that these extra flushes are necessary in the DAX case.  In
> > the page cache case when we have dirty data in the page cache, that data
> > will be actively lost if we evict a dirty page cache page without flushing
> > it to media first.  For DAX, though, the data will remain consistent with
> > the physical address to which it was written regardless of whether it's in
> > the processor cache or not - really the only reason I see to flush is in
> > response to a fsync or msync so that our data is durable on media in case
> > of a power loss.  The case where we could throw dirty data out of the page
> > cache and essentially lose writes simply doesn't exist.
> 
> You should at least note that sync(2) won't make data durable with this
> patch in the changelog. Dave and Christoph have told you that Linux users
> depend on sync(2) to make data durable and I fully agree with them.  Given
> current options, I think we can live with this for 4.5 but long term this
> is IMO unacceptable.
> 
> 								Honza

I agree.  I'll add a note to the changelog and will work on adding support for
sync(2).

> > 
> > Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> > ---
> >  fs/block_dev.c      |  7 +++++++
> >  fs/dax.c            |  5 ++---
> >  fs/ext2/file.c      | 10 ++++++++++
> >  fs/ext4/fsync.c     | 10 +++++++++-
> >  fs/xfs/xfs_file.c   | 12 ++++++++++--
> >  include/linux/dax.h |  4 ++--
> >  mm/filemap.c        |  6 ------
> >  7 files changed, 40 insertions(+), 14 deletions(-)
> > 
> > diff --git a/fs/block_dev.c b/fs/block_dev.c
> > index fa0507a..312ad44 100644
> > --- a/fs/block_dev.c
> > +++ b/fs/block_dev.c
> > @@ -356,8 +356,15 @@ int blkdev_fsync(struct file *filp, loff_t start, loff_t end, int datasync)
> >  {
> >  	struct inode *bd_inode = bdev_file_inode(filp);
> >  	struct block_device *bdev = I_BDEV(bd_inode);
> > +	struct address_space *mapping = bd_inode->i_mapping;
> >  	int error;
> >  	
> > +	if (dax_mapping(mapping) && mapping->nrexceptional) {
> > +		error = dax_writeback_mapping_range(mapping, bdev, start, end);
> > +		if (error)
> > +			return error;
> > +	}
> > +
> >  	error = filemap_write_and_wait_range(filp->f_mapping, start, end);
> >  	if (error)
> >  		return error;
> > diff --git a/fs/dax.c b/fs/dax.c
> > index 4592241..4b5006a 100644
> > --- a/fs/dax.c
> > +++ b/fs/dax.c
> > @@ -484,11 +484,10 @@ static int dax_writeback_one(struct block_device *bdev,
> >   * end]. This is required by data integrity operations to ensure file data is
> >   * on persistent storage prior to completion of the operation.
> >   */
> > -int dax_writeback_mapping_range(struct address_space *mapping, loff_t start,
> > -		loff_t end)
> > +int dax_writeback_mapping_range(struct address_space *mapping,
> > +		struct block_device *bdev, loff_t start, loff_t end)
> >  {
> >  	struct inode *inode = mapping->host;
> > -	struct block_device *bdev = inode->i_sb->s_bdev;
> >  	pgoff_t start_index, end_index, pmd_index;
> >  	pgoff_t indices[PAGEVEC_SIZE];
> >  	struct pagevec pvec;
> > diff --git a/fs/ext2/file.c b/fs/ext2/file.c
> > index 2c88d68..d1abf53 100644
> > --- a/fs/ext2/file.c
> > +++ b/fs/ext2/file.c
> > @@ -162,6 +162,16 @@ int ext2_fsync(struct file *file, loff_t start, loff_t end, int datasync)
> >  	int ret;
> >  	struct super_block *sb = file->f_mapping->host->i_sb;
> >  	struct address_space *mapping = sb->s_bdev->bd_inode->i_mapping;
> > +#ifdef CONFIG_FS_DAX
> > +	struct address_space *inode_mapping = file->f_inode->i_mapping;
> > +
> > +	if (dax_mapping(inode_mapping) && inode_mapping->nrexceptional) {
> > +		ret = dax_writeback_mapping_range(inode_mapping, sb->s_bdev,
> > +				start, end);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +#endif
> >  
> >  	ret = generic_file_fsync(file, start, end, datasync);
> >  	if (ret == -EIO || test_and_clear_bit(AS_EIO, &mapping->flags)) {
> > diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
> > index 8850254..e9cf53b 100644
> > --- a/fs/ext4/fsync.c
> > +++ b/fs/ext4/fsync.c
> > @@ -27,6 +27,7 @@
> >  #include <linux/sched.h>
> >  #include <linux/writeback.h>
> >  #include <linux/blkdev.h>
> > +#include <linux/dax.h>
> >  
> >  #include "ext4.h"
> >  #include "ext4_jbd2.h"
> > @@ -83,10 +84,10 @@ static int ext4_sync_parent(struct inode *inode)
> >   * What we do is just kick off a commit and wait on it.  This will snapshot the
> >   * inode to disk.
> >   */
> > -
> >  int ext4_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
> >  {
> >  	struct inode *inode = file->f_mapping->host;
> > +	struct address_space *mapping = inode->i_mapping;
> >  	struct ext4_inode_info *ei = EXT4_I(inode);
> >  	journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
> >  	int ret = 0, err;
> > @@ -97,6 +98,13 @@ int ext4_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
> >  
> >  	trace_ext4_sync_file_enter(file, datasync);
> >  
> > +	if (dax_mapping(mapping) && mapping->nrexceptional) {
> > +		err = dax_writeback_mapping_range(mapping, inode->i_sb->s_bdev,
> > +				start, end);
> > +		if (err)
> > +			goto out;
> > +	}
> > +
> >  	if (inode->i_sb->s_flags & MS_RDONLY) {
> >  		/* Make sure that we read updated s_mount_flags value */
> >  		smp_rmb();
> > diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
> > index 52883ac..84e95cc 100644
> > --- a/fs/xfs/xfs_file.c
> > +++ b/fs/xfs/xfs_file.c
> > @@ -209,7 +209,8 @@ xfs_file_fsync(
> >  	loff_t			end,
> >  	int			datasync)
> >  {
> > -	struct inode		*inode = file->f_mapping->host;
> > +	struct address_space	*mapping = file->f_mapping;
> > +	struct inode		*inode = mapping->host;
> >  	struct xfs_inode	*ip = XFS_I(inode);
> >  	struct xfs_mount	*mp = ip->i_mount;
> >  	int			error = 0;
> > @@ -218,7 +219,14 @@ xfs_file_fsync(
> >  
> >  	trace_xfs_file_fsync(ip);
> >  
> > -	error = filemap_write_and_wait_range(inode->i_mapping, start, end);
> > +	if (dax_mapping(mapping) && mapping->nrexceptional) {
> > +		error = dax_writeback_mapping_range(mapping,
> > +				xfs_find_bdev_for_inode(inode), start, end);
> > +		if (error)
> > +			return error;
> > +	}
> > +
> > +	error = filemap_write_and_wait_range(mapping, start, end);
> >  	if (error)
> >  		return error;
> >  
> > diff --git a/include/linux/dax.h b/include/linux/dax.h
> > index bad27b0..8e9f114 100644
> > --- a/include/linux/dax.h
> > +++ b/include/linux/dax.h
> > @@ -42,6 +42,6 @@ static inline bool dax_mapping(struct address_space *mapping)
> >  {
> >  	return mapping->host && IS_DAX(mapping->host);
> >  }
> > -int dax_writeback_mapping_range(struct address_space *mapping, loff_t start,
> > -		loff_t end);
> > +int dax_writeback_mapping_range(struct address_space *mapping,
> > +		struct block_device *bdev, loff_t start, loff_t end);
> >  #endif
> > diff --git a/mm/filemap.c b/mm/filemap.c
> > index bc94386..c4286eb 100644
> > --- a/mm/filemap.c
> > +++ b/mm/filemap.c
> > @@ -482,12 +482,6 @@ int filemap_write_and_wait_range(struct address_space *mapping,
> >  {
> >  	int err = 0;
> >  
> > -	if (dax_mapping(mapping) && mapping->nrexceptional) {
> > -		err = dax_writeback_mapping_range(mapping, lstart, lend);
> > -		if (err)
> > -			return err;
> > -	}
> > -
> >  	if (mapping->nrpages) {
> >  		err = __filemap_fdatawrite_range(mapping, lstart, lend,
> >  						 WB_SYNC_ALL);
> > -- 
> > 2.5.0
> > 
> > 
> -- 
> Jan Kara <jack@suse.com>
> SUSE Labs, CR

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

      reply	other threads:[~2016-02-08 16:12 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-07  7:19 [PATCH 0/2] DAX bdev fixes - move flushing calls to FS Ross Zwisler
2016-02-07  7:19 ` [PATCH 1/2] dax: pass bdev argument to dax_clear_blocks() Ross Zwisler
2016-02-07 18:19   ` Dan Williams
2016-02-08  1:46     ` Ross Zwisler
2016-02-08  4:29       ` Ross Zwisler
2016-02-07 22:03   ` Dave Chinner
2016-02-08  1:44     ` Ross Zwisler
2016-02-08  5:17       ` Dave Chinner
2016-02-08 15:34         ` Ross Zwisler
2016-02-07  7:19 ` [PATCH 2/2] dax: move writeback calls into the filesystems Ross Zwisler
2016-02-07 19:13   ` Dan Williams
2016-02-07 21:50     ` Dave Chinner
2016-02-08  8:18       ` Dan Williams
2016-02-08 20:18         ` Dave Chinner
2016-02-08 20:55           ` Dan Williams
2016-02-08 20:58             ` Jeff Moyer
2016-02-08 22:05               ` Dan Williams
2016-02-09  9:43             ` Jan Kara
2016-02-09 16:01               ` Jan Kara
2016-02-09 18:06                 ` Ross Zwisler
2016-02-08 18:31     ` Ross Zwisler
2016-02-08 19:23       ` Dan Williams
2016-02-08 10:48   ` Jan Kara
2016-02-08 16:12     ` Ross Zwisler [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160208161211.GE2343@linux.intel.com \
    --to=ross.zwisler@linux.intel.com \
    --cc=adilger.kernel@dilger.ca \
    --cc=akpm@linux-foundation.org \
    --cc=dan.j.williams@intel.com \
    --cc=david@fromorbit.com \
    --cc=jack@suse.com \
    --cc=jack@suse.cz \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=tytso@mit.edu \
    --cc=viro@zeniv.linux.org.uk \
    --cc=willy@linux.intel.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).