From: Matthew Wilcox <willy@infradead.org>
To: linux-kernel@vger.kernel.org
Cc: Matthew Wilcox <mawilcox@microsoft.com>,
Ross Zwisler <ross.zwisler@linux.intel.com>,
David Howells <dhowells@redhat.com>, Shaohua Li <shli@kernel.org>,
Jens Axboe <axboe@kernel.dk>, Rehas Sachdeva <aquannie@gmail.com>,
Marc Zyngier <marc.zyngier@arm.com>,
linux-mm@kvack.org, linux-fsdevel@vger.kernel.org,
linux-f2fs-devel@lists.sourceforge.net,
linux-nilfs@vger.kernel.org, linux-btrfs@vger.kernel.org,
linux-xfs@vger.kernel.org, linux-usb@vger.kernel.org,
linux-raid@vger.kernel.org
Subject: [PATCH v5 34/78] mm: Convert add_to_swap_cache to XArray
Date: Fri, 15 Dec 2017 14:04:06 -0800 [thread overview]
Message-ID: <20171215220450.7899-35-willy@infradead.org> (raw)
In-Reply-To: <20171215220450.7899-1-willy@infradead.org>
From: Matthew Wilcox <mawilcox@microsoft.com>
Combine __add_to_swap_cache and add_to_swap_cache into one function
since there is no more need to preload.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
---
mm/swap_state.c | 93 ++++++++++++++++++---------------------------------------
1 file changed, 29 insertions(+), 64 deletions(-)
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 3f95e8fc4cb2..a57b5ad4c503 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -107,14 +107,15 @@ void show_swap_cache_info(void)
}
/*
- * __add_to_swap_cache resembles add_to_page_cache_locked on swapper_space,
+ * add_to_swap_cache resembles add_to_page_cache_locked on swapper_space,
* but sets SwapCache flag and private instead of mapping and index.
*/
-int __add_to_swap_cache(struct page *page, swp_entry_t entry)
+int add_to_swap_cache(struct page *page, swp_entry_t entry, gfp_t gfp)
{
- int error, i, nr = hpage_nr_pages(page);
- struct address_space *address_space;
+ struct address_space *address_space = swap_address_space(entry);
pgoff_t idx = swp_offset(entry);
+ XA_STATE(xas, &address_space->pages, idx);
+ unsigned long i, nr = 1UL << compound_order(page);
VM_BUG_ON_PAGE(!PageLocked(page), page);
VM_BUG_ON_PAGE(PageSwapCache(page), page);
@@ -123,50 +124,30 @@ int __add_to_swap_cache(struct page *page, swp_entry_t entry)
page_ref_add(page, nr);
SetPageSwapCache(page);
- address_space = swap_address_space(entry);
- xa_lock_irq(&address_space->pages);
- for (i = 0; i < nr; i++) {
- set_page_private(page + i, entry.val + i);
- error = radix_tree_insert(&address_space->pages,
- idx + i, page + i);
- if (unlikely(error))
- break;
- }
- if (likely(!error)) {
+ do {
+ xas_lock_irq(&xas);
+ xas_create_range(&xas, idx + nr - 1);
+ if (xas_error(&xas))
+ goto unlock;
+ for (i = 0; i < nr; i++) {
+ VM_BUG_ON_PAGE(xas.xa_index != idx + i, page);
+ set_page_private(page + i, entry.val + i);
+ xas_store(&xas, page + i);
+ xas_next(&xas);
+ }
address_space->nrpages += nr;
__mod_node_page_state(page_pgdat(page), NR_FILE_PAGES, nr);
ADD_CACHE_INFO(add_total, nr);
- } else {
- /*
- * Only the context which have set SWAP_HAS_CACHE flag
- * would call add_to_swap_cache().
- * So add_to_swap_cache() doesn't returns -EEXIST.
- */
- VM_BUG_ON(error == -EEXIST);
- set_page_private(page + i, 0UL);
- while (i--) {
- radix_tree_delete(&address_space->pages, idx + i);
- set_page_private(page + i, 0UL);
- }
- ClearPageSwapCache(page);
- page_ref_sub(page, nr);
- }
- xa_unlock_irq(&address_space->pages);
+unlock:
+ xas_unlock_irq(&xas);
+ } while (xas_nomem(&xas, gfp));
- return error;
-}
-
-
-int add_to_swap_cache(struct page *page, swp_entry_t entry, gfp_t gfp_mask)
-{
- int error;
+ if (!xas_error(&xas))
+ return 0;
- error = radix_tree_maybe_preload_order(gfp_mask, compound_order(page));
- if (!error) {
- error = __add_to_swap_cache(page, entry);
- radix_tree_preload_end();
- }
- return error;
+ ClearPageSwapCache(page);
+ page_ref_sub(page, nr);
+ return xas_error(&xas);
}
/*
@@ -220,7 +201,7 @@ int add_to_swap(struct page *page)
goto fail;
/*
- * Radix-tree node allocations from PF_MEMALLOC contexts could
+ * XArray node allocations from PF_MEMALLOC contexts could
* completely exhaust the page allocator. __GFP_NOMEMALLOC
* stops emergency reserves from being allocated.
*
@@ -232,7 +213,6 @@ int add_to_swap(struct page *page)
*/
err = add_to_swap_cache(page, entry,
__GFP_HIGH|__GFP_NOMEMALLOC|__GFP_NOWARN);
- /* -ENOMEM radix-tree allocation failure */
if (err)
/*
* add_to_swap_cache() doesn't return -EEXIST, so we can safely
@@ -400,19 +380,11 @@ struct page *__read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
break; /* Out of memory */
}
- /*
- * call radix_tree_preload() while we can wait.
- */
- err = radix_tree_maybe_preload(gfp_mask & GFP_KERNEL);
- if (err)
- break;
-
/*
* Swap entry may have been freed since our caller observed it.
*/
err = swapcache_prepare(entry);
if (err == -EEXIST) {
- radix_tree_preload_end();
/*
* We might race against get_swap_page() and stumble
* across a SWAP_HAS_CACHE swap_map entry whose page
@@ -420,26 +392,19 @@ struct page *__read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
*/
cond_resched();
continue;
- }
- if (err) { /* swp entry is obsolete ? */
- radix_tree_preload_end();
+ } else if (err) /* swp entry is obsolete ? */
break;
- }
- /* May fail (-ENOMEM) if radix-tree node allocation failed. */
+ /* May fail (-ENOMEM) if XArray node allocation failed. */
__SetPageLocked(new_page);
__SetPageSwapBacked(new_page);
- err = __add_to_swap_cache(new_page, entry);
+ err = add_to_swap_cache(new_page, entry, gfp_mask & GFP_KERNEL);
if (likely(!err)) {
- radix_tree_preload_end();
- /*
- * Initiate read into locked page and return.
- */
+ /* Initiate read into locked page */
lru_cache_add_anon(new_page);
*new_page_allocated = true;
return new_page;
}
- radix_tree_preload_end();
__ClearPageLocked(new_page);
/*
* add_to_swap_cache() doesn't return -EEXIST, so we can safely
--
2.15.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-12-15 22:04 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-15 22:03 [PATCH v5 00/78] XArray v5 Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 01/78] xfs: Rename xa_ elements to ail_ Matthew Wilcox
2018-01-03 1:01 ` Darrick J. Wong
2017-12-15 22:03 ` [PATCH v5 02/78] fscache: Use appropriate radix tree accessors Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 03/78] xarray: Add the xa_lock to the radix_tree_root Matthew Wilcox
2017-12-26 16:54 ` Kirill A. Shutemov
2017-12-27 3:43 ` Matthew Wilcox
2017-12-27 3:58 ` Matthew Wilcox
2017-12-27 10:18 ` Kirill A. Shutemov
2018-01-02 18:01 ` Darrick J. Wong
2018-01-02 22:41 ` Matthew Wilcox
2017-12-27 10:17 ` Kirill A. Shutemov
2017-12-15 22:03 ` [PATCH v5 04/78] page cache: Use xa_lock Matthew Wilcox
2017-12-26 16:56 ` Kirill A. Shutemov
2017-12-15 22:03 ` [PATCH v5 05/78] xarray: Replace exceptional entries Matthew Wilcox
2017-12-26 17:15 ` Kirill A. Shutemov
2017-12-27 3:05 ` Matthew Wilcox
2017-12-27 10:24 ` Kirill A. Shutemov
2017-12-15 22:03 ` [PATCH v5 06/78] xarray: Change definition of sibling entries Matthew Wilcox
2017-12-26 17:21 ` Kirill A. Shutemov
2017-12-27 3:13 ` Matthew Wilcox
2017-12-27 10:26 ` Kirill A. Shutemov
2017-12-15 22:03 ` [PATCH v5 07/78] xarray: Add definition of struct xarray Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 08/78] xarray: Define struct xa_node Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 09/78] xarray: Add documentation Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 10/78] xarray: Add xa_load Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 11/78] xarray: Add xa_get_tag, xa_set_tag and xa_clear_tag Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 12/78] xarray: Add xa_store Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 13/78] xarray: Add xa_cmpxchg Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 14/78] xarray: Add xa_for_each Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 15/78] xarray: Add xas_for_each_tag Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 16/78] xarray: Add xa_get_entries, xa_get_tagged and xa_get_maybe_tag Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 17/78] xarray: Add xa_destroy Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 18/78] xarray: Add xas_next and xas_prev Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 19/78] xarray: Add xas_create_range Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 20/78] xarray: Add MAINTAINERS entry Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 21/78] xarray: Add ability to store errno values Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 22/78] idr: Convert to XArray Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 23/78] ida: " Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 24/78] page cache: Convert hole search " Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 25/78] page cache: Add page_cache_range_empty function Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 26/78] page cache: Add and replace pages using the XArray Matthew Wilcox
2017-12-15 22:03 ` [PATCH v5 27/78] page cache: Convert page deletion to XArray Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 28/78] page cache: Convert page cache lookups " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 29/78] page cache: Convert delete_batch " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 30/78] page cache: Remove stray radix comment Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 31/78] mm: Convert page-writeback to XArray Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 32/78] mm: Convert workingset " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 33/78] mm: Convert truncate " Matthew Wilcox
2017-12-15 22:04 ` Matthew Wilcox [this message]
2017-12-15 22:04 ` [PATCH v5 35/78] mm: Convert delete_from_swap_cache " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 36/78] mm: Convert __do_page_cache_readahead " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 37/78] mm: Convert page migration " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 38/78] mm: Convert huge_memory " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 39/78] mm: Convert collapse_shmem " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 40/78] mm: Convert khugepaged_scan_shmem " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 41/78] pagevec: Use xa_tag_t Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 42/78] shmem: Convert replace to XArray Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 43/78] shmem: Convert shmem_confirm_swap " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 44/78] shmem: Convert find_swap_entry " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 45/78] shmem: Convert shmem_tag_pins " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 46/78] shmem: Convert shmem_wait_for_pins " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 47/78] shmem: Convert shmem_add_to_page_cache " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 48/78] shmem: Convert shmem_alloc_hugepage " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 49/78] shmem: Convert shmem_free_swap " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 50/78] shmem: Convert shmem_partial_swap_usage " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 51/78] shmem: Comment fixups Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 52/78] btrfs: Convert page cache to XArray Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 53/78] fs: Convert buffer " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 54/78] fs: Convert writeback " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 55/78] nilfs2: Convert " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 56/78] f2fs: " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 57/78] lustre: " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 58/78] dax: Convert dax_unlock_mapping_entry " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 59/78] dax: Convert lock_slot " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 60/78] dax: More XArray conversion Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 61/78] dax: Convert __dax_invalidate_mapping_entry to XArray Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 62/78] dax: Convert dax_writeback_one " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 63/78] dax: Convert dax_insert_pfn_mkwrite " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 64/78] dax: Convert dax_insert_mapping_entry " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 65/78] dax: Convert grab_mapping_entry " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 66/78] dax: Fix sparse warning Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 67/78] page cache: Finish XArray conversion Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 68/78] mm: Convert cgroup writeback to XArray Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 69/78] vmalloc: Convert " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 70/78] brd: " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 71/78] xfs: Convert m_perag_tree " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 72/78] xfs: Convert pag_ici_root " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 73/78] xfs: Convert xfs dquot " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 74/78] xfs: Convert mru cache " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 75/78] usb: Convert xhci-mem " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 76/78] md: Convert raid5-cache " Matthew Wilcox
2017-12-15 22:04 ` [PATCH v5 77/78] irqdomain: Convert " Matthew Wilcox
2017-12-16 10:51 ` Marc Zyngier
2017-12-15 22:04 ` [PATCH v5 78/78] fscache: " Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171215220450.7899-35-willy@infradead.org \
--to=willy@infradead.org \
--cc=aquannie@gmail.com \
--cc=axboe@kernel.dk \
--cc=dhowells@redhat.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-nilfs@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux-xfs@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mawilcox@microsoft.com \
--cc=ross.zwisler@linux.intel.com \
--cc=shli@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).