linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Goldwyn Rodrigues <rgoldwyn@suse.de>
To: linux-btrfs@vger.kernel.org
Cc: kilobyte@angband.pl, linux-fsdevel@vger.kernel.org, jack@suse.cz,
	david@fromorbit.com, willy@infradead.org, hch@lst.de,
	darrick.wong@oracle.com, dsterba@suse.cz, nborisov@suse.com,
	linux-nvdimm@lists.01.org, Goldwyn Rodrigues <rgoldwyn@suse.com>
Subject: [PATCH 08/18] dax: memcpy page in case of IOMAP_DAX_COW for mmap faults
Date: Mon, 29 Apr 2019 12:26:39 -0500	[thread overview]
Message-ID: <20190429172649.8288-9-rgoldwyn@suse.de> (raw)
In-Reply-To: <20190429172649.8288-1-rgoldwyn@suse.de>

From: Goldwyn Rodrigues <rgoldwyn@suse.com>

Change dax_iomap_pfn to return the address as well in order to
use it for performing a memcpy in case the type is IOMAP_DAX_COW.
We don't handle PMD because btrfs does not support hugepages.

Question:
The sequence of bdev_dax_pgoff() and dax_direct_access() is
used multiple times to calculate address and pfn's. Would it make
sense to call it while calculating address as well to reduce code?

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
---
 fs/dax.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/fs/dax.c b/fs/dax.c
index 610bfa861a28..718b1632a39d 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -984,7 +984,7 @@ static sector_t dax_iomap_sector(struct iomap *iomap, loff_t pos)
 }
 
 static int dax_iomap_pfn(struct iomap *iomap, loff_t pos, size_t size,
-			 pfn_t *pfnp)
+			 pfn_t *pfnp, void **addr)
 {
 	const sector_t sector = dax_iomap_sector(iomap, pos);
 	pgoff_t pgoff;
@@ -996,7 +996,7 @@ static int dax_iomap_pfn(struct iomap *iomap, loff_t pos, size_t size,
 		return rc;
 	id = dax_read_lock();
 	length = dax_direct_access(iomap->dax_dev, pgoff, PHYS_PFN(size),
-				   NULL, pfnp);
+				   addr, pfnp);
 	if (length < 0) {
 		rc = length;
 		goto out;
@@ -1286,6 +1286,7 @@ static vm_fault_t dax_iomap_pte_fault(struct vm_fault *vmf, pfn_t *pfnp,
 	XA_STATE(xas, &mapping->i_pages, vmf->pgoff);
 	struct inode *inode = mapping->host;
 	unsigned long vaddr = vmf->address;
+	void *addr;
 	loff_t pos = (loff_t)vmf->pgoff << PAGE_SHIFT;
 	struct iomap iomap = { 0 };
 	unsigned flags = IOMAP_FAULT;
@@ -1375,16 +1376,26 @@ static vm_fault_t dax_iomap_pte_fault(struct vm_fault *vmf, pfn_t *pfnp,
 	sync = dax_fault_is_synchronous(flags, vma, &iomap);
 
 	switch (iomap.type) {
+	case IOMAP_DAX_COW:
 	case IOMAP_MAPPED:
 		if (iomap.flags & IOMAP_F_NEW) {
 			count_vm_event(PGMAJFAULT);
 			count_memcg_event_mm(vma->vm_mm, PGMAJFAULT);
 			major = VM_FAULT_MAJOR;
 		}
-		error = dax_iomap_pfn(&iomap, pos, PAGE_SIZE, &pfn);
+		error = dax_iomap_pfn(&iomap, pos, PAGE_SIZE, &pfn, &addr);
 		if (error < 0)
 			goto error_finish_iomap;
 
+		if (iomap.type == IOMAP_DAX_COW) {
+			if (iomap.inline_data) {
+				error = memcpy_mcsafe(addr, iomap.inline_data,
+					      PAGE_SIZE);
+				if (error < 0)
+					goto error_finish_iomap;
+			} else
+				memset(addr, 0, PAGE_SIZE);
+		}
 		entry = dax_insert_entry(&xas, mapping, vmf, entry, pfn,
 						 0, write && !sync);
 
@@ -1597,7 +1608,7 @@ static vm_fault_t dax_iomap_pmd_fault(struct vm_fault *vmf, pfn_t *pfnp,
 
 	switch (iomap.type) {
 	case IOMAP_MAPPED:
-		error = dax_iomap_pfn(&iomap, pos, PMD_SIZE, &pfn);
+		error = dax_iomap_pfn(&iomap, pos, PMD_SIZE, &pfn, NULL);
 		if (error < 0)
 			goto finish_iomap;
 
-- 
2.16.4


  parent reply	other threads:[~2019-04-29 17:27 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-29 17:26 [PATCH v4 00/18] btrfs dax support Goldwyn Rodrigues
2019-04-29 17:26 ` [PATCH 01/18] btrfs: create a mount option for dax Goldwyn Rodrigues
2019-05-21 18:02   ` Darrick J. Wong
2019-04-29 17:26 ` [PATCH 02/18] btrfs: Carve out btrfs_get_extent_map_write() out of btrfs_get_blocks_write() Goldwyn Rodrigues
2019-04-29 17:26 ` [PATCH 03/18] btrfs: basic dax read Goldwyn Rodrigues
2019-05-21 15:14   ` Darrick J. Wong
2019-05-22 21:50     ` Goldwyn Rodrigues
2019-04-29 17:26 ` [PATCH 04/18] dax: Introduce IOMAP_DAX_COW to CoW edges during writes Goldwyn Rodrigues
2019-05-21 16:51   ` Darrick J. Wong
2019-05-22 20:14     ` Goldwyn Rodrigues
2019-05-23  2:10       ` Dave Chinner
2019-05-23  9:05     ` Shiyang Ruan
2019-05-23 11:51       ` Goldwyn Rodrigues
2019-05-27  8:25         ` Shiyang Ruan
2019-05-28  9:17           ` Jan Kara
2019-05-29  2:01             ` Shiyang Ruan
2019-05-29  2:47               ` Dave Chinner
2019-05-29  4:02                 ` Shiyang Ruan
2019-05-29  4:07                   ` Darrick J. Wong
2019-05-29  4:46                     ` Dave Chinner
2019-05-29 13:46                       ` Jan Kara
2019-05-29 22:14                         ` Dave Chinner
2019-05-30 11:16                           ` Jan Kara
2019-05-30 22:59                             ` Dave Chinner
2019-04-29 17:26 ` [PATCH 05/18] btrfs: return whether extent is nocow or not Goldwyn Rodrigues
2019-04-29 17:26 ` [PATCH 06/18] btrfs: Rename __endio_write_update_ordered() to btrfs_update_ordered_extent() Goldwyn Rodrigues
2019-04-29 17:26 ` [PATCH 07/18] btrfs: add dax write support Goldwyn Rodrigues
2019-05-21 17:08   ` Darrick J. Wong
2019-04-29 17:26 ` Goldwyn Rodrigues [this message]
2019-05-21 17:46   ` [PATCH 08/18] dax: memcpy page in case of IOMAP_DAX_COW for mmap faults Darrick J. Wong
2019-05-22 19:11     ` Goldwyn Rodrigues
2019-05-23  4:02       ` Darrick J. Wong
2019-05-23 12:10     ` Jan Kara
2019-04-29 17:26 ` [PATCH 09/18] btrfs: Add dax specific address_space_operations Goldwyn Rodrigues
2019-04-29 17:26 ` [PATCH 10/18] dax: replace mmap entry in case of CoW Goldwyn Rodrigues
2019-05-21 17:35   ` Darrick J. Wong
2019-05-23 13:38   ` Jan Kara
2019-04-29 17:26 ` [PATCH 11/18] btrfs: add dax mmap support Goldwyn Rodrigues
2019-04-29 17:26 ` [PATCH 12/18] btrfs: allow MAP_SYNC mmap Goldwyn Rodrigues
2019-05-10 15:32   ` [PATCH for-goldwyn] btrfs: disallow MAP_SYNC outside of DAX mounts Adam Borowski
2019-05-10 15:41     ` Dan Williams
2019-05-10 15:59       ` Pankaj Gupta
2019-05-23 13:44   ` [PATCH 12/18] btrfs: allow MAP_SYNC mmap Jan Kara
2019-05-23 16:19     ` Adam Borowski
2019-04-29 17:26 ` [PATCH 13/18] fs: dedup file range to use a compare function Goldwyn Rodrigues
2019-05-21 18:17   ` Darrick J. Wong
2019-04-29 17:26 ` [PATCH 14/18] dax: memcpy before zeroing range Goldwyn Rodrigues
2019-05-21 17:27   ` Darrick J. Wong
2019-04-29 17:26 ` [PATCH 15/18] btrfs: handle dax page zeroing Goldwyn Rodrigues
2019-04-29 17:26 ` [PATCH 16/18] btrfs: Writeprotect mmap pages on snapshot Goldwyn Rodrigues
2019-05-23 14:04   ` Jan Kara
2019-05-23 15:27     ` Goldwyn Rodrigues
2019-05-23 19:07       ` Jan Kara
2019-05-23 21:22         ` Goldwyn Rodrigues
2019-04-29 17:26 ` [PATCH 17/18] btrfs: Disable dax-based defrag and send Goldwyn Rodrigues
2019-04-29 17:26 ` [PATCH 18/18] btrfs: trace functions for btrfs_iomap_begin/end Goldwyn Rodrigues
  -- strict thread matches above, loose matches on Subject: below --
2019-04-16 16:41 [PATCH v3 00/18] btrfs dax support Goldwyn Rodrigues
2019-04-16 16:41 ` [PATCH 08/18] dax: memcpy page in case of IOMAP_DAX_COW for mmap faults Goldwyn Rodrigues
2019-04-17 16:52   ` Darrick J. Wong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190429172649.8288-9-rgoldwyn@suse.de \
    --to=rgoldwyn@suse.de \
    --cc=darrick.wong@oracle.com \
    --cc=david@fromorbit.com \
    --cc=dsterba@suse.cz \
    --cc=hch@lst.de \
    --cc=jack@suse.cz \
    --cc=kilobyte@angband.pl \
    --cc=linux-btrfs@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=nborisov@suse.com \
    --cc=rgoldwyn@suse.com \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).