linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Matthew Wilcox (Oracle)" <willy@infradead.org>
To: linux-fsdevel@vger.kernel.org, linux-mm@kvack.org, hch@lst.de,
	kent.overstreet@gmail.com
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Subject: [PATCH 4/4] mm/filemap: Use a dynamically allocated pagevec in filemap_read
Date: Fri,  6 Nov 2020 12:30:40 +0000	[thread overview]
Message-ID: <20201106123040.28451-4-willy@infradead.org> (raw)
In-Reply-To: <20201106123040.28451-1-willy@infradead.org>

Restore Kent's optimisation for I/O sizes between 64kB and 1MB.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
---
 mm/filemap.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/mm/filemap.c b/mm/filemap.c
index f41de0759e86..2b4d8ed241bd 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2427,7 +2427,7 @@ ssize_t filemap_read(struct kiocb *iocb, struct iov_iter *iter,
 	struct file_ra_state *ra = &filp->f_ra;
 	struct address_space *mapping = filp->f_mapping;
 	struct inode *inode = mapping->host;
-	struct pagevec pvec;
+	struct pagevec pvec_stack, *pvec = NULL;
 	int i, error = 0;
 	bool writably_mapped;
 	loff_t isize, end_offset;
@@ -2436,6 +2436,10 @@ ssize_t filemap_read(struct kiocb *iocb, struct iov_iter *iter,
 		return 0;
 	iov_iter_truncate(iter, inode->i_sb->s_maxbytes);
 
+	if (iter->count / PAGE_SIZE > PAGEVEC_SIZE)
+		pvec = pagevec_alloc(iter->count / PAGE_SIZE + 1, GFP_KERNEL);
+	if (!pvec)
+		pvec = &pvec_stack;
 	do {
 		cond_resched();
 
@@ -2447,7 +2451,7 @@ ssize_t filemap_read(struct kiocb *iocb, struct iov_iter *iter,
 		if ((iocb->ki_flags & IOCB_WAITQ) && already_read)
 			iocb->ki_flags |= IOCB_NOWAIT;
 
-		error = filemap_get_pages(iocb, iter, &pvec);
+		error = filemap_get_pages(iocb, iter, pvec);
 		if (error < 0)
 			break;
 
@@ -2476,10 +2480,10 @@ ssize_t filemap_read(struct kiocb *iocb, struct iov_iter *iter,
 		 */
 		if (iocb->ki_pos >> PAGE_SHIFT !=
 		    ra->prev_pos >> PAGE_SHIFT)
-			mark_page_accessed(pvec.pages[0]);
+			mark_page_accessed(pvec->pages[0]);
 
-		for (i = 0; i < pagevec_count(&pvec); i++) {
-			struct page *page = pvec.pages[i];
+		for (i = 0; i < pagevec_count(pvec); i++) {
+			struct page *page = pvec->pages[i];
 			size_t page_size = thp_size(page);
 			size_t offset = iocb->ki_pos & (page_size - 1);
 			size_t bytes = min_t(loff_t, end_offset - iocb->ki_pos,
@@ -2514,7 +2518,7 @@ ssize_t filemap_read(struct kiocb *iocb, struct iov_iter *iter,
 			}
 		}
 put_pages:
-		pagevec_release(&pvec);
+		pagevec_release(pvec);
 	} while (iov_iter_count(iter) && iocb->ki_pos < isize && !error);
 
 	file_accessed(filp);
-- 
2.28.0


  parent reply	other threads:[~2020-11-06 12:30 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-04 20:42 [PATCH v2 00/18] Refactor generic_file_buffered_read Matthew Wilcox (Oracle)
2020-11-04 20:42 ` [PATCH v2 01/18] mm/filemap: Rename generic_file_buffered_read subfunctions Matthew Wilcox (Oracle)
2020-11-06  8:07   ` Christoph Hellwig
2020-11-04 20:42 ` [PATCH v2 02/18] mm/filemap: Remove dynamically allocated array from filemap_read Matthew Wilcox (Oracle)
2020-11-04 21:30   ` Kent Overstreet
2020-11-04 21:43     ` Amy Parker
2020-11-05  0:13     ` Matthew Wilcox
2020-11-06  8:08       ` Christoph Hellwig
2020-11-06 12:30         ` [PATCH 1/4] pagevec: Allow pagevecs to be different sizes Matthew Wilcox (Oracle)
2020-11-06 12:30           ` [PATCH 2/4] pagevec: Increase the size of LRU pagevecs Matthew Wilcox (Oracle)
2020-11-06 12:30           ` [PATCH 3/4] pagevec: Add dynamically allocated pagevecs Matthew Wilcox (Oracle)
2020-11-06 12:30           ` Matthew Wilcox (Oracle) [this message]
2020-11-07 17:08           ` [PATCH 1/4] pagevec: Allow pagevecs to be different sizes Kent Overstreet
2020-11-07 17:20             ` Matthew Wilcox
2020-11-05  4:52     ` [PATCH v2 02/18] mm/filemap: Remove dynamically allocated array from filemap_read Matthew Wilcox
2020-11-06  8:07   ` Christoph Hellwig
2020-11-04 20:42 ` [PATCH v2 03/18] mm/filemap: Convert filemap_get_pages to take a pagevec Matthew Wilcox (Oracle)
2020-11-06  8:08   ` Christoph Hellwig
2020-11-04 20:42 ` [PATCH v2 04/18] mm/filemap: Use THPs in generic_file_buffered_read Matthew Wilcox (Oracle)
2020-11-04 20:42 ` [PATCH v2 05/18] mm/filemap: Pass a sleep state to put_and_wait_on_page_locked Matthew Wilcox (Oracle)
2020-11-04 20:42 ` [PATCH v2 06/18] mm/filemap: Support readpage splitting a page Matthew Wilcox (Oracle)
2020-11-04 20:42 ` [PATCH v2 07/18] mm/filemap: Inline __wait_on_page_locked_async into caller Matthew Wilcox (Oracle)
2020-11-04 20:42 ` [PATCH v2 08/18] mm/filemap: Don't call ->readpage if IOCB_WAITQ is set Matthew Wilcox (Oracle)
2020-11-04 20:42 ` [PATCH v2 09/18] mm/filemap: Change filemap_read_page calling conventions Matthew Wilcox (Oracle)
2020-11-06  8:11   ` Christoph Hellwig
2020-11-04 20:42 ` [PATCH v2 10/18] mm/filemap: Change filemap_create_page " Matthew Wilcox (Oracle)
2020-11-04 20:42 ` [PATCH v2 11/18] mm/filemap: Convert filemap_update_page to return an errno Matthew Wilcox (Oracle)
2020-11-06  8:14   ` Christoph Hellwig
2020-11-06  8:37     ` Christoph Hellwig
2020-11-09 13:29       ` Matthew Wilcox
2020-11-04 20:42 ` [PATCH v2 12/18] mm/filemap: Move the iocb checks into filemap_update_page Matthew Wilcox (Oracle)
2020-11-04 20:42 ` [PATCH v2 13/18] mm/filemap: Add filemap_range_uptodate Matthew Wilcox (Oracle)
2020-11-06  8:16   ` Christoph Hellwig
2020-11-04 20:42 ` [PATCH v2 14/18] mm/filemap: Split filemap_readahead out of filemap_get_pages Matthew Wilcox (Oracle)
2020-11-06  8:19   ` Christoph Hellwig
2020-11-04 20:42 ` [PATCH v2 15/18] mm/filemap: Restructure filemap_get_pages Matthew Wilcox (Oracle)
2020-11-06  8:21   ` Christoph Hellwig
2020-11-04 20:42 ` [PATCH v2 16/18] mm/filemap: Don't relock the page after calling readpage Matthew Wilcox (Oracle)
2020-11-06  8:21   ` Christoph Hellwig
2020-11-04 20:42 ` [PATCH v2 17/18] mm/filemap: Rename generic_file_buffered_read to filemap_read Matthew Wilcox (Oracle)
2020-11-04 20:42 ` [PATCH v2 18/18] mm/filemap: Simplify generic_file_read_iter Matthew Wilcox (Oracle)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201106123040.28451-4-willy@infradead.org \
    --to=willy@infradead.org \
    --cc=hch@lst.de \
    --cc=kent.overstreet@gmail.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).