[PATCH 11/14] firmware_loader: rename EXTRA_FIRMWARE and EXTRA_FIRMWARE_DIR

["Luis R. Rodriguez" <mcgrof@kernel.org>]

From: Luis Chamberlain <mcgrof@kernel.org>

Now that we've tied loose ends on the built-in firmware API,
rename the kconfig symbols for it to reflect more that they are
associated to the firmware_loader and to make it easier to
understand what they are for.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
---
 .../driver-api/firmware/built-in-fw.rst       |  6 +++---
 Documentation/x86/microcode.rst               |  6 +++---
 arch/x86/Kconfig                              |  4 ++--
 drivers/base/firmware_loader/Kconfig          | 20 +++++++++++--------
 drivers/base/firmware_loader/builtin/Makefile |  6 +++---
 drivers/staging/media/av7110/Kconfig          |  4 ++--
 6 files changed, 25 insertions(+), 21 deletions(-)

diff --git a/Documentation/driver-api/firmware/built-in-fw.rst b/Documentation/driver-api/firmware/built-in-fw.rst
index 9dd2b1df44f0..b36ea4b13b5e 100644
--- a/Documentation/driver-api/firmware/built-in-fw.rst
+++ b/Documentation/driver-api/firmware/built-in-fw.rst
@@ -9,11 +9,11 @@ directly. You can enable built-in firmware using the kernel configuration
 options:
 
   * CONFIG_FW_LOADER_BUILTIN
-  * CONFIG_EXTRA_FIRMWARE
-  * CONFIG_EXTRA_FIRMWARE_DIR
+  * CONFIG_FW_LOADER_BUILTIN_FILES
+  * CONFIG_FW_LOADER_BUILTIN_DIR
 
 There are a few reasons why you might want to consider building your firmware
-into the kernel with CONFIG_EXTRA_FIRMWARE:
+into the kernel with CONFIG_FW_LOADER_BUILTIN_FILES:
 
 * Speed
 * Firmware is needed for accessing the boot device, and the user doesn't
diff --git a/Documentation/x86/microcode.rst b/Documentation/x86/microcode.rst
index d199f0b98869..7aa9c86b2868 100644
--- a/Documentation/x86/microcode.rst
+++ b/Documentation/x86/microcode.rst
@@ -115,13 +115,13 @@ Builtin microcode
 
 The loader supports also loading of a builtin microcode supplied through
 the regular builtin firmware method using CONFIG_FW_LOADER_BUILTIN and
-CONFIG_EXTRA_FIRMWARE. Only 64-bit is currently supported.
+CONFIG_FW_LOADER_BUILTIN_FILES. Only 64-bit is currently supported.
 
 Here's an example::
 
   CONFIG_FW_LOADER_BUILTIN=y
-  CONFIG_EXTRA_FIRMWARE="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin"
-  CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
+  CONFIG_FW_LOADER_BUILTIN_FILES="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin"
+  CONFIG_FW_LOADER_BUILTIN_DIR="/lib/firmware"
 
 This basically means, you have the following tree structure locally::
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 25960fe242bd..60eae188ebe0 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1304,8 +1304,8 @@ config MICROCODE
 	  initrd for microcode blobs.
 
 	  In addition, you can build the microcode into the kernel. For that you
-	  need to add the vendor-supplied microcode to the CONFIG_EXTRA_FIRMWARE
-	  config option.
+	  need to add the vendor-supplied microcode to the configuration option
+	  CONFIG_FW_LOADER_BUILTIN_FILES
 
 config MICROCODE_INTEL
 	bool "Intel microcode loading support"
diff --git a/drivers/base/firmware_loader/Kconfig b/drivers/base/firmware_loader/Kconfig
index de4fcd9d41f3..181bfbc108e6 100644
--- a/drivers/base/firmware_loader/Kconfig
+++ b/drivers/base/firmware_loader/Kconfig
@@ -22,7 +22,7 @@ config FW_LOADER
 	  You typically want this built-in (=y) but you can also enable this
 	  as a module, in which case the firmware_class module will be built.
 	  You also want to be sure to enable this built-in if you are going to
-	  enable built-in firmware (CONFIG_EXTRA_FIRMWARE).
+	  enable built-in firmware (CONFIG_FW_LOADER_BUILTIN_FILES).
 
 if FW_LOADER
 
@@ -48,18 +48,22 @@ config FW_LOADER_BUILTIN
 	  Support for built-in firmware is not supported if you are using
 	  the firmware loader as a module.
 
-config EXTRA_FIRMWARE
+config FW_LOADER_BUILTIN_FILES
 	string "Build named firmware blobs into the kernel binary"
 	depends on FW_LOADER_BUILTIN
 	help
 	  This option is a string and takes the space-separated names of the
 	  firmware files -- the same names that appear in MODULE_FIRMWARE()
 	  and request_firmware() in the source. These files should exist under
-	  the directory specified by the EXTRA_FIRMWARE_DIR option, which is
+	  the directory specified by the FW_LOADER_BUILTIN_DIR option, which is
 	  /lib/firmware by default.
 
-	  For example, you might set CONFIG_EXTRA_FIRMWARE="usb8388.bin", copy
-	  the usb8388.bin file into /lib/firmware, and build the kernel. Then
+	  For example, you might have set:
+
+	  CONFIG_FW_LOADER_BUILTIN_FILES="usb8388.bin"
+
+	  After this you would copy the usb8388.bin file into directory
+	  specified by FW_LOADER_BUILTIN_DIR and build the kernel. Then
 	  any request_firmware("usb8388.bin") will be satisfied internally
 	  inside the kernel without ever looking at your filesystem at runtime.
 
@@ -69,15 +73,15 @@ config EXTRA_FIRMWARE
 	  image since it combines both GPL and non-GPL work. You should
 	  consult a lawyer of your own before distributing such an image.
 
-config EXTRA_FIRMWARE_DIR
+config FW_LOADER_BUILTIN_DIR
 	string "Directory with firmware to be built-in to the kernel"
 	depends on FW_LOADER_BUILTIN
 	default "/lib/firmware"
 	help
 	  This option specifies the directory which the kernel build system
 	  will use to look for the firmware files which are going to be
-	  built into the kernel using the space-separated EXTRA_FIRMWARE
-	  entries.
+	  built into the kernel using the space-separated
+	  FW_LOADER_BUILTIN_FILES entries.
 
 config FW_LOADER_USER_HELPER
 	bool "Enable the firmware sysfs fallback mechanism"
diff --git a/drivers/base/firmware_loader/builtin/Makefile b/drivers/base/firmware_loader/builtin/Makefile
index eb4be452062a..7cdd0b5c7384 100644
--- a/drivers/base/firmware_loader/builtin/Makefile
+++ b/drivers/base/firmware_loader/builtin/Makefile
@@ -1,12 +1,12 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y  += main.o
 
-# Create $(fwdir) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
+# Create $(fwdir) from $(CONFIG_FW_LOADER_BUILTIN_DIR) -- if it doesn't have a
 # leading /, it's relative to $(srctree).
-fwdir := $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE_DIR))
+fwdir := $(subst $(quote),,$(CONFIG_FW_LOADER_BUILTIN_DIR))
 fwdir := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
 
-firmware  := $(addsuffix .gen.o, $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE)))
+firmware  := $(addsuffix .gen.o, $(subst $(quote),,$(CONFIG_FW_LOADER_BUILTIN_FILES)))
 obj-y += $(firmware)
 
 FWNAME    = $(patsubst $(obj)/%.gen.S,%,$@)
diff --git a/drivers/staging/media/av7110/Kconfig b/drivers/staging/media/av7110/Kconfig
index 9faf9d2d4001..87c7702f72f6 100644
--- a/drivers/staging/media/av7110/Kconfig
+++ b/drivers/staging/media/av7110/Kconfig
@@ -31,8 +31,8 @@ config DVB_AV7110
 	  or /lib/firmware (depending on configuration of firmware hotplug).
 
 	  Alternatively, you can download the file and use the kernel's
-	  EXTRA_FIRMWARE configuration option to build it into your
-	  kernel image by adding the filename to the EXTRA_FIRMWARE
+	  FW_LOADER_BUILTIN_FILES configuration option to build it into your
+	  kernel image by adding the filename to the FW_LOADER_BUILTIN_FILES
 	  configuration option string.
 
 	  Say Y if you own such a card and want to use it.
-- 
2.30.2