From: "Vishal Moola (Oracle)" <vishal.moola@gmail.com>
To: linux-mm@kvack.org
Cc: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-ext4@vger.kernel.org, akpm@linux-foundation.org,
willy@infradead.org, naoya.horiguchi@nec.com, tytso@mit.edu,
"Vishal Moola (Oracle)" <vishal.moola@gmail.com>
Subject: [PATCH v3 1/4] ext4: Convert move_extent_per_page() to use folios
Date: Thu, 17 Nov 2022 23:30:52 -0800 [thread overview]
Message-ID: <20221118073055.55694-2-vishal.moola@gmail.com> (raw)
In-Reply-To: <20221118073055.55694-1-vishal.moola@gmail.com>
Converts move_extent_per_page() to use folios. This change removes
5 calls to compound_head() and is in preparation for the removal of
the try_to_release_page() wrapper.
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
---
fs/ext4/move_extent.c | 52 ++++++++++++++++++++++++++-----------------
1 file changed, 31 insertions(+), 21 deletions(-)
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index 044e34cd835c..8dbb87edf24c 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -253,6 +253,7 @@ move_extent_per_page(struct file *o_filp, struct inode *donor_inode,
{
struct inode *orig_inode = file_inode(o_filp);
struct page *pagep[2] = {NULL, NULL};
+ struct folio *folio[2] = {NULL, NULL};
handle_t *handle;
ext4_lblk_t orig_blk_offset, donor_blk_offset;
unsigned long blocksize = orig_inode->i_sb->s_blocksize;
@@ -313,6 +314,13 @@ move_extent_per_page(struct file *o_filp, struct inode *donor_inode,
* hold page's lock, if it is still the case data copy is not
* necessary, just swap data blocks between orig and donor.
*/
+ folio[0] = page_folio(pagep[0]);
+ folio[1] = page_folio(pagep[1]);
+
+ VM_BUG_ON_FOLIO(folio_test_large(folio[0]), folio[0]);
+ VM_BUG_ON_FOLIO(folio_test_large(folio[1]), folio[1]);
+ VM_BUG_ON_FOLIO(folio_nr_pages(folio[0]) != folio_nr_pages(folio[1]), folio[1]);
+
if (unwritten) {
ext4_double_down_write_data_sem(orig_inode, donor_inode);
/* If any of extents in range became initialized we have to
@@ -331,10 +339,10 @@ move_extent_per_page(struct file *o_filp, struct inode *donor_inode,
ext4_double_up_write_data_sem(orig_inode, donor_inode);
goto data_copy;
}
- if ((page_has_private(pagep[0]) &&
- !try_to_release_page(pagep[0], 0)) ||
- (page_has_private(pagep[1]) &&
- !try_to_release_page(pagep[1], 0))) {
+ if ((folio_has_private(folio[0]) &&
+ !filemap_release_folio(folio[0], 0)) ||
+ (folio_has_private(folio[1]) &&
+ !filemap_release_folio(folio[1], 0))) {
*err = -EBUSY;
goto drop_data_sem;
}
@@ -344,19 +352,21 @@ move_extent_per_page(struct file *o_filp, struct inode *donor_inode,
block_len_in_page, 1, err);
drop_data_sem:
ext4_double_up_write_data_sem(orig_inode, donor_inode);
- goto unlock_pages;
+ goto unlock_folios;
}
data_copy:
- *err = mext_page_mkuptodate(pagep[0], from, from + replaced_size);
+ *err = mext_page_mkuptodate(&folio[0]->page, from, from + replaced_size);
if (*err)
- goto unlock_pages;
+ goto unlock_folios;
/* At this point all buffers in range are uptodate, old mapping layout
* is no longer required, try to drop it now. */
- if ((page_has_private(pagep[0]) && !try_to_release_page(pagep[0], 0)) ||
- (page_has_private(pagep[1]) && !try_to_release_page(pagep[1], 0))) {
+ if ((folio_has_private(folio[0]) &&
+ !filemap_release_folio(folio[0], 0)) ||
+ (folio_has_private(folio[1]) &&
+ !filemap_release_folio(folio[1], 0))) {
*err = -EBUSY;
- goto unlock_pages;
+ goto unlock_folios;
}
ext4_double_down_write_data_sem(orig_inode, donor_inode);
replaced_count = ext4_swap_extents(handle, orig_inode, donor_inode,
@@ -369,13 +379,13 @@ move_extent_per_page(struct file *o_filp, struct inode *donor_inode,
replaced_size =
block_len_in_page << orig_inode->i_blkbits;
} else
- goto unlock_pages;
+ goto unlock_folios;
}
/* Perform all necessary steps similar write_begin()/write_end()
* but keeping in mind that i_size will not change */
- if (!page_has_buffers(pagep[0]))
- create_empty_buffers(pagep[0], 1 << orig_inode->i_blkbits, 0);
- bh = page_buffers(pagep[0]);
+ if (!folio_buffers(folio[0]))
+ create_empty_buffers(&folio[0]->page, 1 << orig_inode->i_blkbits, 0);
+ bh = folio_buffers(folio[0]);
for (i = 0; i < data_offset_in_page; i++)
bh = bh->b_this_page;
for (i = 0; i < block_len_in_page; i++) {
@@ -385,7 +395,7 @@ move_extent_per_page(struct file *o_filp, struct inode *donor_inode,
bh = bh->b_this_page;
}
if (!*err)
- *err = block_commit_write(pagep[0], from, from + replaced_size);
+ *err = block_commit_write(&folio[0]->page, from, from + replaced_size);
if (unlikely(*err < 0))
goto repair_branches;
@@ -395,11 +405,11 @@ move_extent_per_page(struct file *o_filp, struct inode *donor_inode,
*err = ext4_jbd2_inode_add_write(handle, orig_inode,
(loff_t)orig_page_offset << PAGE_SHIFT, replaced_size);
-unlock_pages:
- unlock_page(pagep[0]);
- put_page(pagep[0]);
- unlock_page(pagep[1]);
- put_page(pagep[1]);
+unlock_folios:
+ folio_unlock(folio[0]);
+ folio_put(folio[0]);
+ folio_unlock(folio[1]);
+ folio_put(folio[1]);
stop_journal:
ext4_journal_stop(handle);
if (*err == -ENOSPC &&
@@ -430,7 +440,7 @@ move_extent_per_page(struct file *o_filp, struct inode *donor_inode,
*err = -EIO;
}
replaced_count = 0;
- goto unlock_pages;
+ goto unlock_folios;
}
/**
--
2.38.1
next prev parent reply other threads:[~2022-11-18 7:31 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-18 7:30 [PATCH v3 0/4] Removing the try_to_release_page() wrapper Vishal Moola (Oracle)
2022-11-18 7:30 ` Vishal Moola (Oracle) [this message]
2022-11-18 7:30 ` [PATCH v3 2/4] khugepage: Replace try_to_release_page() with filemap_release_folio() Vishal Moola (Oracle)
2022-11-18 7:30 ` [PATCH v3 3/4] memory-failure: Convert truncate_error_page() to use folio Vishal Moola (Oracle)
2022-11-18 7:30 ` [PATCH v3 4/4] folio-compat: Remove try_to_release_page() Vishal Moola (Oracle)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221118073055.55694-2-vishal.moola@gmail.com \
--to=vishal.moola@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=naoya.horiguchi@nec.com \
--cc=tytso@mit.edu \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).