[PATCH v9 0/9] Implement copy offload support

[PATCH v9 0/9] Implement copy offload support

[Anuj Gupta]

From: Nitesh Shetty <nj.shetty@samsung.com>

The patch series covers the points discussed in November 2021 virtual
call [LSF/MM/BFP TOPIC] Storage: Copy Offload [0].
We have covered the initial agreed requirements in this patchset and
further additional features suggested by community.
Patchset borrows Mikulas's token based approach for 2 bdev
implementation.

This is on top of our previous patchset v8[1].

Overall series supports:
========================
	1. Driver
		- NVMe Copy command (single NS, TP 4065), including support
		in nvme-target (for block and file backend).

	2. Block layer
		- Block-generic copy (REQ_COPY flag), with interface
		accommodating two block-devs
		- Emulation, for in-kernel user when offload is natively 
                absent
		- dm-linear support (for cases not requiring split)

	3. User-interface
		- copy_file_range

Testing
=======
	Copy offload can be tested on:
	a. QEMU: NVME simple copy (TP 4065). By setting nvme-ns
		parameters mssrl,mcl, msrc. For more info [2].
	b. Null block device
        c. Fabrics loopback.
	d. blktests[3] (tests block/032,033, nvme/046,047,048,049)

	Emulation can be tested on any device.

	fio[4].

Infra and plumbing:
===================
        We populate copy_file_range callback in def_blk_fops. 
        For devices that support copy-offload, use blkdev_copy_offload to
        achieve in-device copy.
        However for cases, where device doesn't support offload,
        fallback to generic_copy_file_range.
        For in-kernel users (like fabrics), we use blkdev_issue_copy
        which implements its own emulation, as fd is not available.
        Modify checks in generic_copy_file_range to support block-device.

Performance:
============
        The major benefit of this copy-offload/emulation framework is
        observed in fabrics setup, for copy workloads across the network.
        The host will send offload command over the network and actual copy
        can be achieved using emulation on the target.
        This results in better performance and network utilisation,
        as compared to read and write travelling across the network.
        With async-design of copy-offload/emulation we are able to see the
        following improvements as compared to userspace read + write on a
        NVMeOF TCP setup:

        Setup1: Network Speed: 1000Mb/s
        Host PC: Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz
        Target PC: AMD Ryzen 9 5900X 12-Core Processor
        block size 8k:
        710% improvement in IO BW (108 MiB/s to 876 MiB/s).
        Network utilisation drops from  97% to 15%.
        block-size 1M:
        2532% improvement in IO BW (101 MiB/s to 2659 MiB/s).
        Network utilisation drops from 89% to 0.62%.

        Setup2: Network Speed: 100Gb/s
        Server: Intel(R) Xeon(R) Gold 6240 CPU @ 2.60GHz, 72 cores
        (host and target have the same configuration)
        block-size 8k:
        17.5% improvement in IO BW (794 MiB/s to 933 MiB/s).
        Network utilisation drops from  6.75% to 0.16%.

Blktests[3]
======================
	tests/block/032,033: Runs copy offload and emulation on block device.
        tests/nvme/046,047,048,049 Create a loop backed fabrics device and
        run copy offload and emulation.

Future Work
===========
	- loopback device copy offload support
	- upstream fio to use copy offload

	These are to be taken up after we reach consensus on the
	plumbing of current elements that are part of this series.


Additional links:
=================
	[0] https://lore.kernel.org/linux-nvme/CA+1E3rJ7BZ7LjQXXTdX+-0Edz=zT14mmPGMiVCzUgB33C60tbQ@mail.gmail.com/
	[1] https://lore.kernel.org/lkml/20230327084103.21601-1-anuj20.g@samsung.com/T/
	[2] https://qemu-project.gitlab.io/qemu/system/devices/nvme.html#simple-copy
	[3] https://github.com/nitesh-shetty/blktests/tree/feat/copy_offload/v7
	[4] https://github.com/vincentkfu/fio/commits/copyoffload-cfr-3.34-dev

Changes since v8:
=================
        - null_blk, copy_max_bytes_hw is made config fs parameter
          (Damien Le Moal)
        - Negative error handling in copy_file_range (Christian Brauner)
        - minor fixes, better documentation (Damien Le Moal)
        - fio upgraded to 3.34 (Vincent Fu)

Changes since v7:
=================
        - null block copy offload support for testing (Damien Le Moal)
        - adding direct flag check for copy offload to block device,
	  as we are using generic_copy_file_range for cached cases.
        - Minor fixes

Changes since v6:
=================
        - copy_file_range instead of ioctl for direct block device
        - Remove support for multi range (vectored) copy
        - Remove ioctl interface for copy.
        - Remove offload support in dm kcopyd.

Changes since v5:
=================
	- Addition of blktests (Chaitanya Kulkarni)
        - Minor fix for fabrics file backed path
        - Remove buggy zonefs copy file range implementation.

Changes since v4:
=================
	- make the offload and emulation design asynchronous (Hannes
	  Reinecke)
	- fabrics loopback support
	- sysfs naming improvements (Damien Le Moal)
	- use kfree() instead of kvfree() in cio_await_completion
	  (Damien Le Moal)
	- use ranges instead of rlist to represent range_entry (Damien
	  Le Moal)
	- change argument ordering in blk_copy_offload suggested (Damien
	  Le Moal)
	- removed multiple copy limit and merged into only one limit
	  (Damien Le Moal)
	- wrap overly long lines (Damien Le Moal)
	- other naming improvements and cleanups (Damien Le Moal)
	- correctly format the code example in description (Damien Le
	  Moal)
	- mark blk_copy_offload as static (kernel test robot)
	
Changes since v3:
=================
	- added copy_file_range support for zonefs
	- added documentation about new sysfs entries
	- incorporated review comments on v3
	- minor fixes

Changes since v2:
=================
	- fixed possible race condition reported by Damien Le Moal
	- new sysfs controls as suggested by Damien Le Moal
	- fixed possible memory leak reported by Dan Carpenter, lkp
	- minor fixes

Nitesh Shetty (9):
  block: Introduce queue limits for copy-offload support
  block: Add copy offload support infrastructure
  block: add emulation for copy
  fs, block: copy_file_range for def_blk_ops for direct block device
  nvme: add copy offload support
  nvmet: add copy command support for bdev and file ns
  dm: Add support for copy offload
  dm: Enable copy offload for dm-linear target
  null_blk: add support for copy offload

 Documentation/ABI/stable/sysfs-block |  33 +++
 block/blk-lib.c                      | 416 +++++++++++++++++++++++++++
 block/blk-map.c                      |   4 +-
 block/blk-settings.c                 |  24 ++
 block/blk-sysfs.c                    |  64 +++++
 block/blk.h                          |   2 +
 block/fops.c                         |  20 ++
 drivers/block/null_blk/main.c        | 101 +++++++
 drivers/block/null_blk/null_blk.h    |   8 +
 drivers/md/dm-linear.c               |   1 +
 drivers/md/dm-table.c                |  41 +++
 drivers/md/dm.c                      |   7 +
 drivers/nvme/host/constants.c        |   1 +
 drivers/nvme/host/core.c             | 106 ++++++-
 drivers/nvme/host/fc.c               |   5 +
 drivers/nvme/host/nvme.h             |   7 +
 drivers/nvme/host/pci.c              |  27 +-
 drivers/nvme/host/rdma.c             |   7 +
 drivers/nvme/host/tcp.c              |  16 ++
 drivers/nvme/host/trace.c            |  19 ++
 drivers/nvme/target/admin-cmd.c      |   9 +-
 drivers/nvme/target/io-cmd-bdev.c    |  58 ++++
 drivers/nvme/target/io-cmd-file.c    |  52 ++++
 drivers/nvme/target/loop.c           |   6 +
 drivers/nvme/target/nvmet.h          |   1 +
 fs/read_write.c                      |  11 +-
 include/linux/blk_types.h            |  25 ++
 include/linux/blkdev.h               |  21 ++
 include/linux/device-mapper.h        |   5 +
 include/linux/nvme.h                 |  43 ++-
 include/uapi/linux/fs.h              |   3 +
 31 files changed, 1129 insertions(+), 14 deletions(-)


base-commit: e134c93f788fb93fd6a3ec3af9af850a2048c7e6
-- 
2.35.1.500.gb896f729e2

[PATCH v9 1/9] block: Introduce queue limits for copy-offload support

[Anuj Gupta]

From: Nitesh Shetty <nj.shetty@samsung.com>

Add device limits as sysfs entries,
        - copy_offload (RW)
        - copy_max_bytes (RW)
        - copy_max_bytes_hw (RO)

Above limits help to split the copy payload in block layer.
copy_offload: used for setting copy offload(1) or emulation(0).
copy_max_bytes: maximum total length of copy in single payload.
copy_max_bytes_hw: Reflects the device supported maximum limit.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
---
 Documentation/ABI/stable/sysfs-block | 33 ++++++++++++++
 block/blk-settings.c                 | 24 +++++++++++
 block/blk-sysfs.c                    | 64 ++++++++++++++++++++++++++++
 include/linux/blkdev.h               | 12 ++++++
 include/uapi/linux/fs.h              |  3 ++
 5 files changed, 136 insertions(+)

diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block
index c57e5b7cb532..e4d31132f77c 100644
--- a/Documentation/ABI/stable/sysfs-block
+++ b/Documentation/ABI/stable/sysfs-block
@@ -155,6 +155,39 @@ Description:
 		last zone of the device which may be smaller.
 
 
+What:		/sys/block/<disk>/queue/copy_offload
+Date:		April 2023
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] When read, this file shows whether offloading copy to a
+		device is enabled (1) or disabled (0). Writing '0' to this
+		file will disable offloading copies for this device.
+		Writing any '1' value will enable this feature. If the device
+		does not support offloading, then writing 1, will result in
+		error.
+
+
+What:		/sys/block/<disk>/queue/copy_max_bytes
+Date:		April 2023
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This is the maximum number of bytes, that the block layer
+		will allow for copy request. This will be smaller or equal to
+		the maximum size allowed by the hardware, indicated by
+		'copy_max_bytes_hw'. Attempt to set value higher than
+		'copy_max_bytes_hw' will truncate this to 'copy_max_bytes_hw'.
+
+
+What:		/sys/block/<disk>/queue/copy_max_bytes_hw
+Date:		April 2023
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This is the maximum number of bytes, that the hardware
+		will allow in a single data copy request.
+		A value of 0 means that the device does not support
+		copy offload.
+
+
 What:		/sys/block/<disk>/queue/crypto/
 Date:		February 2022
 Contact:	linux-block@vger.kernel.org
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 896b4654ab00..23aff2d4dcba 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -59,6 +59,8 @@ void blk_set_default_limits(struct queue_limits *lim)
 	lim->zoned = BLK_ZONED_NONE;
 	lim->zone_write_granularity = 0;
 	lim->dma_alignment = 511;
+	lim->max_copy_sectors_hw = 0;
+	lim->max_copy_sectors = 0;
 }
 
 /**
@@ -82,6 +84,8 @@ void blk_set_stacking_limits(struct queue_limits *lim)
 	lim->max_dev_sectors = UINT_MAX;
 	lim->max_write_zeroes_sectors = UINT_MAX;
 	lim->max_zone_append_sectors = UINT_MAX;
+	lim->max_copy_sectors_hw = ULONG_MAX;
+	lim->max_copy_sectors = ULONG_MAX;
 }
 EXPORT_SYMBOL(blk_set_stacking_limits);
 
@@ -183,6 +187,22 @@ void blk_queue_max_discard_sectors(struct request_queue *q,
 }
 EXPORT_SYMBOL(blk_queue_max_discard_sectors);
 
+/**
+ * blk_queue_max_copy_sectors_hw - set max sectors for a single copy payload
+ * @q:  the request queue for the device
+ * @max_copy_sectors: maximum number of sectors to copy
+ **/
+void blk_queue_max_copy_sectors_hw(struct request_queue *q,
+		unsigned int max_copy_sectors)
+{
+	if (max_copy_sectors > (COPY_MAX_BYTES >> SECTOR_SHIFT))
+		max_copy_sectors = COPY_MAX_BYTES >> SECTOR_SHIFT;
+
+	q->limits.max_copy_sectors_hw = max_copy_sectors;
+	q->limits.max_copy_sectors = max_copy_sectors;
+}
+EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors_hw);
+
 /**
  * blk_queue_max_secure_erase_sectors - set max sectors for a secure erase
  * @q:  the request queue for the device
@@ -578,6 +598,10 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 	t->max_segment_size = min_not_zero(t->max_segment_size,
 					   b->max_segment_size);
 
+	t->max_copy_sectors = min(t->max_copy_sectors, b->max_copy_sectors);
+	t->max_copy_sectors_hw = min(t->max_copy_sectors_hw,
+						b->max_copy_sectors_hw);
+
 	t->misaligned |= b->misaligned;
 
 	alignment = queue_limit_alignment_offset(b, start);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 1a743b4f2958..dccb162cf318 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -213,6 +213,63 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag
 	return queue_var_show(0, page);
 }
 
+static ssize_t queue_copy_offload_show(struct request_queue *q, char *page)
+{
+	return queue_var_show(blk_queue_copy(q), page);
+}
+
+static ssize_t queue_copy_offload_store(struct request_queue *q,
+				       const char *page, size_t count)
+{
+	s64 copy_offload;
+	ssize_t ret = queue_var_store64(&copy_offload, page);
+
+	if (ret < 0)
+		return ret;
+
+	if (copy_offload && !q->limits.max_copy_sectors_hw)
+		return -EINVAL;
+
+	if (copy_offload)
+		blk_queue_flag_set(QUEUE_FLAG_COPY, q);
+	else
+		blk_queue_flag_clear(QUEUE_FLAG_COPY, q);
+
+	return count;
+}
+
+static ssize_t queue_copy_max_hw_show(struct request_queue *q, char *page)
+{
+	return sprintf(page, "%llu\n", (unsigned long long)
+			q->limits.max_copy_sectors_hw << SECTOR_SHIFT);
+}
+
+static ssize_t queue_copy_max_show(struct request_queue *q, char *page)
+{
+	return sprintf(page, "%llu\n", (unsigned long long)
+			q->limits.max_copy_sectors << SECTOR_SHIFT);
+}
+
+static ssize_t queue_copy_max_store(struct request_queue *q,
+				       const char *page, size_t count)
+{
+	s64 max_copy;
+	ssize_t ret = queue_var_store64(&max_copy, page);
+
+	if (ret < 0)
+		return ret;
+
+	if (max_copy & (queue_logical_block_size(q) - 1))
+		return -EINVAL;
+
+	max_copy >>= SECTOR_SHIFT;
+	if (max_copy > q->limits.max_copy_sectors_hw)
+		max_copy = q->limits.max_copy_sectors_hw;
+
+	q->limits.max_copy_sectors = max_copy;
+	return count;
+}
+
 static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
 {
 	return queue_var_show(0, page);
@@ -591,6 +648,10 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones");
 QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones");
 QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones");
 
+QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload");
+QUEUE_RO_ENTRY(queue_copy_max_hw, "copy_max_bytes_hw");
+QUEUE_RW_ENTRY(queue_copy_max, "copy_max_bytes");
+
 QUEUE_RW_ENTRY(queue_nomerges, "nomerges");
 QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity");
 QUEUE_RW_ENTRY(queue_poll, "io_poll");
@@ -638,6 +699,9 @@ static struct attribute *queue_attrs[] = {
 	&queue_discard_max_entry.attr,
 	&queue_discard_max_hw_entry.attr,
 	&queue_discard_zeroes_data_entry.attr,
+	&queue_copy_offload_entry.attr,
+	&queue_copy_max_hw_entry.attr,
+	&queue_copy_max_entry.attr,
 	&queue_write_same_max_entry.attr,
 	&queue_write_zeroes_max_entry.attr,
 	&queue_zone_append_max_entry.attr,
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index e3242e67a8e3..200338f2ec2e 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -298,6 +298,9 @@ struct queue_limits {
 	unsigned int		discard_alignment;
 	unsigned int		zone_write_granularity;
 
+	unsigned long		max_copy_sectors_hw;
+	unsigned long		max_copy_sectors;
+
 	unsigned short		max_segments;
 	unsigned short		max_integrity_segments;
 	unsigned short		max_discard_segments;
@@ -564,6 +567,7 @@ struct request_queue {
 #define QUEUE_FLAG_NOWAIT       29	/* device supports NOWAIT */
 #define QUEUE_FLAG_SQ_SCHED     30	/* single queue style io dispatch */
 #define QUEUE_FLAG_SKIP_TAGSET_QUIESCE	31 /* quiesce_tagset skip the queue*/
+#define QUEUE_FLAG_COPY		32	/* supports copy offload */
 
 #define QUEUE_FLAG_MQ_DEFAULT	((1UL << QUEUE_FLAG_IO_STAT) |		\
 				 (1UL << QUEUE_FLAG_SAME_COMP) |	\
@@ -584,6 +588,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q);
 	test_bit(QUEUE_FLAG_STABLE_WRITES, &(q)->queue_flags)
 #define blk_queue_io_stat(q)	test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
 #define blk_queue_add_random(q)	test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
+#define blk_queue_copy(q)	test_bit(QUEUE_FLAG_COPY, &(q)->queue_flags)
 #define blk_queue_zone_resetall(q)	\
 	test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags)
 #define blk_queue_dax(q)	test_bit(QUEUE_FLAG_DAX, &(q)->queue_flags)
@@ -902,6 +907,8 @@ extern void blk_queue_chunk_sectors(struct request_queue *, unsigned int);
 extern void blk_queue_max_segments(struct request_queue *, unsigned short);
 extern void blk_queue_max_discard_segments(struct request_queue *,
 		unsigned short);
+extern void blk_queue_max_copy_sectors_hw(struct request_queue *q,
+		unsigned int max_copy_sectors);
 void blk_queue_max_secure_erase_sectors(struct request_queue *q,
 		unsigned int max_sectors);
 extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
@@ -1221,6 +1228,11 @@ static inline unsigned int bdev_discard_granularity(struct block_device *bdev)
 	return bdev_get_queue(bdev)->limits.discard_granularity;
 }
 
+static inline unsigned int bdev_max_copy_sectors(struct block_device *bdev)
+{
+	return bdev_get_queue(bdev)->limits.max_copy_sectors;
+}
+
 static inline unsigned int
 bdev_max_secure_erase_sectors(struct block_device *bdev)
 {
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
index b7b56871029c..8879567791fa 100644
--- a/include/uapi/linux/fs.h
+++ b/include/uapi/linux/fs.h
@@ -64,6 +64,9 @@ struct fstrim_range {
 	__u64 minlen;
 };
 
+/* maximum total copy length */
+#define COPY_MAX_BYTES	(1 << 27)
+
 /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
 #define FILE_DEDUPE_RANGE_SAME		0
 #define FILE_DEDUPE_RANGE_DIFFERS	1
-- 
2.35.1.500.gb896f729e2

[PATCH v9 2/9] block: Add copy offload support infrastructure

[Anuj Gupta]

From: Nitesh Shetty <nj.shetty@samsung.com>

Introduce blkdev_issue_copy which takes similar arguments as
copy_file_range and performs copy offload between two bdevs.
Introduce REQ_COPY copy offload operation flag. Create a read-write
bio pair with a token as payload and submitted to the device in order.
Read request populates token with source specific information which
is then passed with write request.
This design is courtesy Mikulas Patocka's token based copy

Larger copy will be divided, based on max_copy_sectors limit.

Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
---
 block/blk-lib.c           | 230 ++++++++++++++++++++++++++++++++++++++
 block/blk.h               |   2 +
 include/linux/blk_types.h |  25 +++++
 include/linux/blkdev.h    |   3 +
 4 files changed, 260 insertions(+)

diff --git a/block/blk-lib.c b/block/blk-lib.c
index e59c3069e835..b5914a357763 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -115,6 +115,236 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 }
 EXPORT_SYMBOL(blkdev_issue_discard);
 
+/*
+ * For synchronous copy offload/emulation, wait and process all in-flight BIOs.
+ * This must only be called once all bios have been issued so that the refcount
+ * can only decrease. This just waits for all bios to make it through
+ * blkdev_copy_write_endio.
+ */
+static int blkdev_copy_wait_completion(struct cio *cio)
+{
+	int ret;
+
+	if (cio->endio)
+		return 0;
+
+	if (atomic_read(&cio->refcount)) {
+		__set_current_state(TASK_UNINTERRUPTIBLE);
+		blk_io_schedule();
+	}
+
+	ret = cio->comp_len;
+	kfree(cio);
+
+	return ret;
+}
+
+static void blkdev_copy_offload_write_endio(struct bio *bio)
+{
+	struct copy_ctx *ctx = bio->bi_private;
+	struct cio *cio = ctx->cio;
+	sector_t clen;
+
+	if (bio->bi_status) {
+		clen = (bio->bi_iter.bi_sector << SECTOR_SHIFT) - cio->pos_out;
+		cio->comp_len = min_t(sector_t, clen, cio->comp_len);
+	}
+	__free_page(bio->bi_io_vec[0].bv_page);
+	bio_put(bio);
+
+	kfree(ctx);
+	if (!atomic_dec_and_test(&cio->refcount))
+		return;
+	if (cio->endio) {
+		cio->endio(cio->private, cio->comp_len);
+		kfree(cio);
+	} else
+		blk_wake_io_task(cio->waiter);
+}
+
+static void blkdev_copy_offload_read_endio(struct bio *read_bio)
+{
+	struct copy_ctx *ctx = read_bio->bi_private;
+	struct cio *cio = ctx->cio;
+	sector_t clen;
+
+	if (read_bio->bi_status) {
+		clen = (read_bio->bi_iter.bi_sector << SECTOR_SHIFT)
+				- cio->pos_in;
+		cio->comp_len = min_t(sector_t, clen, cio->comp_len);
+		__free_page(read_bio->bi_io_vec[0].bv_page);
+		bio_put(ctx->write_bio);
+		bio_put(read_bio);
+		kfree(ctx);
+		if (atomic_dec_and_test(&cio->refcount)) {
+			if (cio->endio) {
+				cio->endio(cio->private, cio->comp_len);
+				kfree(cio);
+			} else
+				blk_wake_io_task(cio->waiter);
+		}
+		return;
+	}
+
+	schedule_work(&ctx->dispatch_work);
+	bio_put(read_bio);
+}
+
+static void blkdev_copy_dispatch_work(struct work_struct *work)
+{
+	struct copy_ctx *ctx = container_of(work, struct copy_ctx,
+			dispatch_work);
+
+	submit_bio(ctx->write_bio);
+}
+
+/*
+ * __blkdev_copy_offload	- Use device's native copy offload feature.
+ * we perform copy operation by sending 2 bio.
+ * 1. First we send a read bio with REQ_COPY flag along with a token and source
+ * and length. Once read bio reaches driver layer, device driver adds all the
+ * source info to token and does a fake completion.
+ * 2. Once read operation completes, we issue write with REQ_COPY flag with same
+ * token. In driver layer, token info is used to form a copy offload command.
+ *
+ * returns the length of bytes copied
+ */
+static int __blkdev_copy_offload(struct block_device *bdev_in, loff_t pos_in,
+		struct block_device *bdev_out, loff_t pos_out, size_t len,
+		cio_iodone_t endio, void *private, gfp_t gfp_mask)
+{
+	struct cio *cio;
+	struct copy_ctx *ctx;
+	struct bio *read_bio, *write_bio;
+	struct page *token;
+	sector_t copy_len;
+	sector_t rem, max_copy_len;
+
+	cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
+	if (!cio)
+		return 0;
+	atomic_set(&cio->refcount, 0);
+	cio->waiter = current;
+	cio->endio = endio;
+	cio->private = private;
+
+	max_copy_len = min(bdev_max_copy_sectors(bdev_in),
+			bdev_max_copy_sectors(bdev_out)) << SECTOR_SHIFT;
+
+	cio->pos_in = pos_in;
+	cio->pos_out = pos_out;
+	/* If there is a error, comp_len will be set to least successfully
+	 * completed copied length */
+	cio->comp_len = len;
+	for (rem = len; rem > 0; rem -= copy_len) {
+		copy_len = min(rem, max_copy_len);
+
+		token = alloc_page(gfp_mask);
+		if (unlikely(!token))
+			goto err_token;
+
+		ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
+		if (!ctx)
+			goto err_ctx;
+		read_bio = bio_alloc(bdev_in, 1, REQ_OP_READ | REQ_COPY
+			| REQ_SYNC | REQ_NOMERGE, gfp_mask);
+		if (!read_bio)
+			goto err_read_bio;
+		write_bio = bio_alloc(bdev_out, 1, REQ_OP_WRITE
+			| REQ_COPY | REQ_SYNC | REQ_NOMERGE, gfp_mask);
+		if (!write_bio)
+			goto err_write_bio;
+
+		ctx->cio = cio;
+		ctx->write_bio = write_bio;
+		INIT_WORK(&ctx->dispatch_work, blkdev_copy_dispatch_work);
+
+		__bio_add_page(read_bio, token, PAGE_SIZE, 0);
+		read_bio->bi_iter.bi_size = copy_len;
+		read_bio->bi_iter.bi_sector = pos_in >> SECTOR_SHIFT;
+		read_bio->bi_end_io = blkdev_copy_offload_read_endio;
+		read_bio->bi_private = ctx;
+
+		__bio_add_page(write_bio, token, PAGE_SIZE, 0);
+		write_bio->bi_iter.bi_size = copy_len;
+		write_bio->bi_end_io = blkdev_copy_offload_write_endio;
+		write_bio->bi_iter.bi_sector = pos_out >> SECTOR_SHIFT;
+		write_bio->bi_private = ctx;
+
+		atomic_inc(&cio->refcount);
+		submit_bio(read_bio);
+		pos_in += copy_len;
+		pos_out += copy_len;
+	}
+
+	/* Wait for completion of all IO's*/
+	return blkdev_copy_wait_completion(cio);
+
+err_write_bio:
+	bio_put(read_bio);
+err_read_bio:
+	kfree(ctx);
+err_ctx:
+	__free_page(token);
+err_token:
+	cio->comp_len = min_t(sector_t, cio->comp_len, (len - rem));
+	return blkdev_copy_wait_completion(cio);
+}
+
+static inline int blkdev_copy_sanity_check(struct block_device *bdev_in,
+	loff_t pos_in, struct block_device *bdev_out, loff_t pos_out,
+	size_t len)
+{
+	unsigned int align = max(bdev_logical_block_size(bdev_out),
+					bdev_logical_block_size(bdev_in)) - 1;
+
+	if (bdev_read_only(bdev_out))
+		return -EPERM;
+
+	if ((pos_in & align) || (pos_out & align) || (len & align) || !len ||
+		len >= COPY_MAX_BYTES)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * @bdev_in:	source block device
+ * @pos_in:	source offset
+ * @bdev_out:	destination block device
+ * @pos_out:	destination offset
+ * @len:	length in bytes to be copied
+ * @endio:	endio function to be called on completion of copy operation,
+ *		for synchronous operation this should be NULL
+ * @private:	endio function will be called with this private data, should be
+ *		NULL, if operation is synchronous in nature
+ * @gfp_mask:   memory allocation flags (for bio_alloc)
+ *
+ * Returns the length of bytes copied
+ *
+ * Description:
+ *	Copy source offset from source block device to destination block
+ *	device. Max total length of copy is limited to MAX_COPY_TOTAL_LENGTH
+ */
+int blkdev_issue_copy(struct block_device *bdev_in, loff_t pos_in,
+		      struct block_device *bdev_out, loff_t pos_out, size_t len,
+		      cio_iodone_t endio, void *private, gfp_t gfp_mask)
+{
+	struct request_queue *q_in = bdev_get_queue(bdev_in);
+	struct request_queue *q_out = bdev_get_queue(bdev_out);
+	int ret = 0;
+
+	if (blkdev_copy_sanity_check(bdev_in, pos_in, bdev_out, pos_out, len))
+		return 0;
+
+	if (blk_queue_copy(q_in) && blk_queue_copy(q_out))
+		ret = __blkdev_copy_offload(bdev_in, pos_in, bdev_out, pos_out,
+			   len, endio, private, gfp_mask);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(blkdev_issue_copy);
+
 static int __blkdev_issue_write_zeroes(struct block_device *bdev,
 		sector_t sector, sector_t nr_sects, gfp_t gfp_mask,
 		struct bio **biop, unsigned flags)
diff --git a/block/blk.h b/block/blk.h
index d65d96994a94..684b8fa121db 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -311,6 +311,8 @@ static inline bool bio_may_exceed_limits(struct bio *bio,
 		break;
 	}
 
+	if (unlikely(op_is_copy(bio->bi_opf)))
+		return false;
 	/*
 	 * All drivers must accept single-segments bios that are <= PAGE_SIZE.
 	 * This is a quick and dirty check that relies on the fact that
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 80670a641cc2..da07ce399881 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -416,6 +416,7 @@ enum req_flag_bits {
 	 */
 	/* for REQ_OP_WRITE_ZEROES: */
 	__REQ_NOUNMAP,		/* do not free blocks when zeroing */
+	__REQ_COPY,		/* copy request */
 
 	__REQ_NR_BITS,		/* stops here */
 };
@@ -440,6 +441,7 @@ enum req_flag_bits {
 #define REQ_POLLED	(__force blk_opf_t)(1ULL << __REQ_POLLED)
 #define REQ_ALLOC_CACHE	(__force blk_opf_t)(1ULL << __REQ_ALLOC_CACHE)
 #define REQ_SWAP	(__force blk_opf_t)(1ULL << __REQ_SWAP)
+#define REQ_COPY	((__force blk_opf_t)(1ULL << __REQ_COPY))
 #define REQ_DRV		(__force blk_opf_t)(1ULL << __REQ_DRV)
 #define REQ_FS_PRIVATE	(__force blk_opf_t)(1ULL << __REQ_FS_PRIVATE)
 
@@ -470,6 +472,11 @@ static inline bool op_is_write(blk_opf_t op)
 	return !!(op & (__force blk_opf_t)1);
 }
 
+static inline bool op_is_copy(blk_opf_t op)
+{
+	return op & REQ_COPY;
+}
+
 /*
  * Check if the bio or request is one that needs special treatment in the
  * flush state machine.
@@ -529,4 +536,22 @@ struct blk_rq_stat {
 	u64 batch;
 };
 
+typedef void (cio_iodone_t)(void *private, int comp_len);
+
+struct cio {
+	struct task_struct *waiter;     /* waiting task (NULL if none) */
+	atomic_t refcount;
+	loff_t pos_in;
+	loff_t pos_out;
+	size_t comp_len;
+	cio_iodone_t *endio;		/* applicable for async operation */
+	void *private;			/* applicable for async operation */
+};
+
+struct copy_ctx {
+	struct cio *cio;
+	struct work_struct dispatch_work;
+	struct bio *write_bio;
+};
+
 #endif /* __LINUX_BLK_TYPES_H */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 200338f2ec2e..1bb43697d43d 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1054,6 +1054,9 @@ int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 		sector_t nr_sects, gfp_t gfp_mask, struct bio **biop);
 int blkdev_issue_secure_erase(struct block_device *bdev, sector_t sector,
 		sector_t nr_sects, gfp_t gfp);
+int blkdev_issue_copy(struct block_device *bdev_in, loff_t pos_in,
+		      struct block_device *bdev_out, loff_t pos_out, size_t len,
+		      cio_iodone_t end_io, void *private, gfp_t gfp_mask);
 
 #define BLKDEV_ZERO_NOUNMAP	(1 << 0)  /* do not free blocks */
 #define BLKDEV_ZERO_NOFALLBACK	(1 << 1)  /* don't write explicit zeroes */
-- 
2.35.1.500.gb896f729e2

[PATCH v9 3/9] block: add emulation for copy

[Anuj Gupta]

From: Nitesh Shetty <nj.shetty@samsung.com>

For the devices which does not support copy, copy emulation is added.
It is required for in-kernel users like fabrics, where file descriptor is
not available and hence they can't use copy_file_range.
Copy-emulation is implemented by reading from source into memory and
writing to the corresponding destination asynchronously.
Also emulation is used, if copy offload fails or partially completes.

Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
---
 block/blk-lib.c        | 167 +++++++++++++++++++++++++++++++++++++++++
 block/blk-map.c        |   4 +-
 include/linux/blkdev.h |   3 +
 3 files changed, 172 insertions(+), 2 deletions(-)

diff --git a/block/blk-lib.c b/block/blk-lib.c
index b5914a357763..2b6e0f5b1f31 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -291,6 +291,169 @@ static int __blkdev_copy_offload(struct block_device *bdev_in, loff_t pos_in,
 	return blkdev_copy_wait_completion(cio);
 }
 
+static void *blkdev_copy_alloc_buf(sector_t req_size, sector_t *alloc_size,
+		gfp_t gfp_mask)
+{
+	int min_size = PAGE_SIZE;
+	void *buf;
+
+	while (req_size >= min_size) {
+		buf = kvmalloc(req_size, gfp_mask);
+		if (buf) {
+			*alloc_size = req_size;
+			return buf;
+		}
+		/* retry half the requested size */
+		req_size >>= 1;
+	}
+
+	return NULL;
+}
+
+static void blkdev_copy_emulate_write_endio(struct bio *bio)
+{
+	struct copy_ctx *ctx = bio->bi_private;
+	struct cio *cio = ctx->cio;
+	sector_t clen;
+
+	if (bio->bi_status) {
+		clen = (bio->bi_iter.bi_sector << SECTOR_SHIFT) - cio->pos_out;
+		cio->comp_len = min_t(sector_t, clen, cio->comp_len);
+	}
+	kvfree(page_address(bio->bi_io_vec[0].bv_page));
+	bio_map_kern_endio(bio);
+	kfree(ctx);
+	if (atomic_dec_and_test(&cio->refcount)) {
+		if (cio->endio) {
+			cio->endio(cio->private, cio->comp_len);
+			kfree(cio);
+		} else
+			blk_wake_io_task(cio->waiter);
+	}
+}
+
+static void blkdev_copy_emulate_read_endio(struct bio *read_bio)
+{
+	struct copy_ctx *ctx = read_bio->bi_private;
+	struct cio *cio = ctx->cio;
+	sector_t clen;
+
+	if (read_bio->bi_status) {
+		clen = (read_bio->bi_iter.bi_sector << SECTOR_SHIFT) -
+						cio->pos_in;
+		cio->comp_len = min_t(sector_t, clen, cio->comp_len);
+		__free_page(read_bio->bi_io_vec[0].bv_page);
+		bio_map_kern_endio(read_bio);
+		kfree(ctx);
+
+		if (atomic_dec_and_test(&cio->refcount)) {
+			if (cio->endio) {
+				cio->endio(cio->private, cio->comp_len);
+				kfree(cio);
+			} else
+				blk_wake_io_task(cio->waiter);
+		}
+	}
+	schedule_work(&ctx->dispatch_work);
+	kfree(read_bio);
+}
+
+/*
+ * If native copy offload feature is absent, this function tries to emulate,
+ * by copying data from source to a temporary buffer and from buffer to
+ * destination device.
+ * returns the length of bytes copied
+ */
+static int __blkdev_copy_emulate(struct block_device *bdev_in, loff_t pos_in,
+		      struct block_device *bdev_out, loff_t pos_out, size_t len,
+		      cio_iodone_t endio, void *private, gfp_t gfp_mask)
+{
+	struct request_queue *in = bdev_get_queue(bdev_in);
+	struct request_queue *out = bdev_get_queue(bdev_out);
+	struct bio *read_bio, *write_bio;
+	void *buf = NULL;
+	struct copy_ctx *ctx;
+	struct cio *cio;
+	sector_t buf_len, req_len, rem = 0;
+	sector_t max_src_hw_len = min_t(unsigned int,
+			queue_max_hw_sectors(in),
+			queue_max_segments(in) << (PAGE_SHIFT - SECTOR_SHIFT))
+			<< SECTOR_SHIFT;
+	sector_t max_dst_hw_len = min_t(unsigned int,
+		queue_max_hw_sectors(out),
+			queue_max_segments(out) << (PAGE_SHIFT - SECTOR_SHIFT))
+			<< SECTOR_SHIFT;
+	sector_t max_hw_len = min_t(unsigned int,
+			max_src_hw_len, max_dst_hw_len);
+
+	cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
+	if (!cio)
+		return 0;
+	atomic_set(&cio->refcount, 0);
+	cio->pos_in = pos_in;
+	cio->pos_out = pos_out;
+	cio->waiter = current;
+	cio->endio = endio;
+	cio->private = private;
+
+	for (rem = len; rem > 0; rem -= buf_len) {
+		req_len = min_t(int, max_hw_len, rem);
+
+		buf = blkdev_copy_alloc_buf(req_len, &buf_len, gfp_mask);
+		if (!buf)
+			goto err_alloc_buf;
+
+		ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
+		if (!ctx)
+			goto err_ctx;
+
+		read_bio = bio_map_kern(in, buf, buf_len, gfp_mask);
+		if (IS_ERR(read_bio))
+			goto err_read_bio;
+
+		write_bio = bio_map_kern(out, buf, buf_len, gfp_mask);
+		if (IS_ERR(write_bio))
+			goto err_write_bio;
+
+		ctx->cio = cio;
+		ctx->write_bio = write_bio;
+		INIT_WORK(&ctx->dispatch_work, blkdev_copy_dispatch_work);
+
+		read_bio->bi_iter.bi_sector = pos_in >> SECTOR_SHIFT;
+		read_bio->bi_iter.bi_size = buf_len;
+		read_bio->bi_opf = REQ_OP_READ | REQ_SYNC;
+		bio_set_dev(read_bio, bdev_in);
+		read_bio->bi_end_io = blkdev_copy_emulate_read_endio;
+		read_bio->bi_private = ctx;
+
+		write_bio->bi_iter.bi_size = buf_len;
+		write_bio->bi_opf = REQ_OP_WRITE | REQ_SYNC;
+		bio_set_dev(write_bio, bdev_out);
+		write_bio->bi_end_io = blkdev_copy_emulate_write_endio;
+		write_bio->bi_iter.bi_sector = pos_out >> SECTOR_SHIFT;
+		write_bio->bi_private = ctx;
+
+		atomic_inc(&cio->refcount);
+		submit_bio(read_bio);
+
+		pos_in += buf_len;
+		pos_out += buf_len;
+	}
+
+	/* Wait for completion of all IO's*/
+	return blkdev_copy_wait_completion(cio);
+
+err_write_bio:
+	bio_put(read_bio);
+err_read_bio:
+	kfree(ctx);
+err_ctx:
+	kvfree(buf);
+err_alloc_buf:
+	cio->comp_len -= min_t(sector_t, cio->comp_len, len - rem);
+	return blkdev_copy_wait_completion(cio);
+}
+
 static inline int blkdev_copy_sanity_check(struct block_device *bdev_in,
 	loff_t pos_in, struct block_device *bdev_out, loff_t pos_out,
 	size_t len)
@@ -341,6 +504,10 @@ int blkdev_issue_copy(struct block_device *bdev_in, loff_t pos_in,
 		ret = __blkdev_copy_offload(bdev_in, pos_in, bdev_out, pos_out,
 			   len, endio, private, gfp_mask);
 
+	if (ret != len)
+		ret = __blkdev_copy_emulate(bdev_in, pos_in + ret, bdev_out,
+			 pos_out + ret, len - ret, endio, private, gfp_mask);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(blkdev_issue_copy);
diff --git a/block/blk-map.c b/block/blk-map.c
index 3551c3ff17cf..e75bae459cfa 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -363,7 +363,7 @@ static void bio_invalidate_vmalloc_pages(struct bio *bio)
 #endif
 }
 
-static void bio_map_kern_endio(struct bio *bio)
+void bio_map_kern_endio(struct bio *bio)
 {
 	bio_invalidate_vmalloc_pages(bio);
 	bio_uninit(bio);
@@ -380,7 +380,7 @@ static void bio_map_kern_endio(struct bio *bio)
  *	Map the kernel address into a bio suitable for io to a block
  *	device. Returns an error pointer in case of error.
  */
-static struct bio *bio_map_kern(struct request_queue *q, void *data,
+struct bio *bio_map_kern(struct request_queue *q, void *data,
 		unsigned int len, gfp_t gfp_mask)
 {
 	unsigned long kaddr = (unsigned long)data;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 1bb43697d43d..a54153610800 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1057,6 +1057,9 @@ int blkdev_issue_secure_erase(struct block_device *bdev, sector_t sector,
 int blkdev_issue_copy(struct block_device *bdev_in, loff_t pos_in,
 		      struct block_device *bdev_out, loff_t pos_out, size_t len,
 		      cio_iodone_t end_io, void *private, gfp_t gfp_mask);
+struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
+		gfp_t gfp_mask);
+void bio_map_kern_endio(struct bio *bio);
 
 #define BLKDEV_ZERO_NOUNMAP	(1 << 0)  /* do not free blocks */
 #define BLKDEV_ZERO_NOFALLBACK	(1 << 1)  /* don't write explicit zeroes */
-- 
2.35.1.500.gb896f729e2

[PATCH v9 4/9] fs, block: copy_file_range for def_blk_ops for direct block device

[Anuj Gupta]

From: Nitesh Shetty <nj.shetty@samsung.com>

For direct block device opened with O_DIRECT, use copy_file_range to
issue device copy offload, and fallback to generic_copy_file_range incase
device copy offload capability is absent.
Modify checks to allow bdevs to use copy_file_range.

Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
 block/blk-lib.c        | 19 +++++++++++++++++++
 block/fops.c           | 20 ++++++++++++++++++++
 fs/read_write.c        | 11 +++++++++--
 include/linux/blkdev.h |  3 +++
 4 files changed, 51 insertions(+), 2 deletions(-)

diff --git a/block/blk-lib.c b/block/blk-lib.c
index 2b6e0f5b1f31..b6e193603789 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -512,6 +512,25 @@ int blkdev_issue_copy(struct block_device *bdev_in, loff_t pos_in,
 }
 EXPORT_SYMBOL_GPL(blkdev_issue_copy);
 
+int blkdev_copy_offload(struct block_device *bdev_in, loff_t pos_in,
+		      struct block_device *bdev_out, loff_t pos_out, size_t len,
+		      cio_iodone_t endio, void *private, gfp_t gfp_mask)
+{
+	struct request_queue *in_q = bdev_get_queue(bdev_in);
+	struct request_queue *out_q = bdev_get_queue(bdev_out);
+	int ret = 0;
+
+	if (blkdev_copy_sanity_check(bdev_in, pos_in, bdev_out, pos_out, len))
+		return 0;
+
+	if (blk_queue_copy(in_q) && blk_queue_copy(out_q))
+		ret = __blkdev_copy_offload(bdev_in, pos_in, bdev_out, pos_out,
+				len, endio, private, gfp_mask);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(blkdev_copy_offload);
+
 static int __blkdev_issue_write_zeroes(struct block_device *bdev,
 		sector_t sector, sector_t nr_sects, gfp_t gfp_mask,
 		struct bio **biop, unsigned flags)
diff --git a/block/fops.c b/block/fops.c
index d2e6be4e3d1c..3b7c05831d5c 100644
--- a/block/fops.c
+++ b/block/fops.c
@@ -611,6 +611,25 @@ static ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
 	return ret;
 }
 
+static ssize_t blkdev_copy_file_range(struct file *file_in, loff_t pos_in,
+				struct file *file_out, loff_t pos_out,
+				size_t len, unsigned int flags)
+{
+	struct block_device *in_bdev = I_BDEV(bdev_file_inode(file_in));
+	struct block_device *out_bdev = I_BDEV(bdev_file_inode(file_out));
+	int comp_len = 0;
+
+	if ((file_in->f_iocb_flags & IOCB_DIRECT) &&
+		(file_out->f_iocb_flags & IOCB_DIRECT))
+		comp_len = blkdev_copy_offload(in_bdev, pos_in, out_bdev,
+				 pos_out, len, NULL, NULL, GFP_KERNEL);
+	if (comp_len != len)
+		comp_len = generic_copy_file_range(file_in, pos_in + comp_len,
+			file_out, pos_out + comp_len, len - comp_len, flags);
+
+	return comp_len;
+}
+
 #define	BLKDEV_FALLOC_FL_SUPPORTED					\
 		(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |		\
 		 FALLOC_FL_ZERO_RANGE | FALLOC_FL_NO_HIDE_STALE)
@@ -694,6 +713,7 @@ const struct file_operations def_blk_fops = {
 	.splice_read	= generic_file_splice_read,
 	.splice_write	= iter_file_splice_write,
 	.fallocate	= blkdev_fallocate,
+	.copy_file_range = blkdev_copy_file_range,
 };
 
 static __init int blkdev_init(void)
diff --git a/fs/read_write.c b/fs/read_write.c
index a21ba3be7dbe..47e848fcfd42 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -20,6 +20,7 @@
 #include <linux/compat.h>
 #include <linux/mount.h>
 #include <linux/fs.h>
+#include <linux/blkdev.h>
 #include "internal.h"
 
 #include <linux/uaccess.h>
@@ -1447,7 +1448,11 @@ static int generic_copy_file_checks(struct file *file_in, loff_t pos_in,
 		return -EOVERFLOW;
 
 	/* Shorten the copy to EOF */
-	size_in = i_size_read(inode_in);
+	if (S_ISBLK(inode_in->i_mode))
+		size_in = bdev_nr_bytes(I_BDEV(file_in->f_mapping->host));
+	else
+		size_in = i_size_read(inode_in);
+
 	if (pos_in >= size_in)
 		count = 0;
 	else
@@ -1708,7 +1713,9 @@ int generic_file_rw_checks(struct file *file_in, struct file *file_out)
 	/* Don't copy dirs, pipes, sockets... */
 	if (S_ISDIR(inode_in->i_mode) || S_ISDIR(inode_out->i_mode))
 		return -EISDIR;
-	if (!S_ISREG(inode_in->i_mode) || !S_ISREG(inode_out->i_mode))
+
+	if ((!S_ISREG(inode_in->i_mode) || !S_ISREG(inode_out->i_mode)) &&
+		(!S_ISBLK(inode_in->i_mode) || !S_ISBLK(inode_out->i_mode)))
 		return -EINVAL;
 
 	if (!(file_in->f_mode & FMODE_READ) ||
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index a54153610800..468d5f3378e2 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1057,6 +1057,9 @@ int blkdev_issue_secure_erase(struct block_device *bdev, sector_t sector,
 int blkdev_issue_copy(struct block_device *bdev_in, loff_t pos_in,
 		      struct block_device *bdev_out, loff_t pos_out, size_t len,
 		      cio_iodone_t end_io, void *private, gfp_t gfp_mask);
+int blkdev_copy_offload(struct block_device *bdev_in, loff_t pos_in,
+		      struct block_device *bdev_out, loff_t pos_out, size_t len,
+		      cio_iodone_t end_io, void *private, gfp_t gfp_mask);
 struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
 		gfp_t gfp_mask);
 void bio_map_kern_endio(struct bio *bio);
-- 
2.35.1.500.gb896f729e2

[PATCH v9 5/9] nvme: add copy offload support

[Anuj Gupta]

From: Nitesh Shetty <nj.shetty@samsung.com>

For device supporting native copy, nvme driver receives read and
write request with BLK_COPY op flags.
For read request the nvme driver populates the payload with source
information.
For write request the driver converts it to nvme copy command using the
source information in the payload and submits to the device.
current design only supports single source range.
This design is courtesy Mikulas Patocka's token based copy

trace event support for nvme_copy_cmd.
Set the device copy limits to queue limits.

Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Javier González <javier.gonz@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
---
 drivers/nvme/host/constants.c |   1 +
 drivers/nvme/host/core.c      | 106 +++++++++++++++++++++++++++++++++-
 drivers/nvme/host/fc.c        |   5 ++
 drivers/nvme/host/nvme.h      |   7 +++
 drivers/nvme/host/pci.c       |  27 ++++++++-
 drivers/nvme/host/rdma.c      |   7 +++
 drivers/nvme/host/tcp.c       |  16 +++++
 drivers/nvme/host/trace.c     |  19 ++++++
 include/linux/nvme.h          |  43 +++++++++++++-
 9 files changed, 223 insertions(+), 8 deletions(-)

diff --git a/drivers/nvme/host/constants.c b/drivers/nvme/host/constants.c
index bc523ca02254..01be882b726f 100644
--- a/drivers/nvme/host/constants.c
+++ b/drivers/nvme/host/constants.c
@@ -19,6 +19,7 @@ static const char * const nvme_ops[] = {
 	[nvme_cmd_resv_report] = "Reservation Report",
 	[nvme_cmd_resv_acquire] = "Reservation Acquire",
 	[nvme_cmd_resv_release] = "Reservation Release",
+	[nvme_cmd_copy] = "Copy Offload",
 	[nvme_cmd_zone_mgmt_send] = "Zone Management Send",
 	[nvme_cmd_zone_mgmt_recv] = "Zone Management Receive",
 	[nvme_cmd_zone_append] = "Zone Management Append",
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 3ffdc80ebb6c..745c512c324b 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -754,6 +754,80 @@ static inline void nvme_setup_flush(struct nvme_ns *ns,
 	cmnd->common.nsid = cpu_to_le32(ns->head->ns_id);
 }
 
+static inline blk_status_t nvme_setup_copy_read(struct nvme_ns *ns,
+		struct request *req)
+{
+	struct bio *bio = req->bio;
+	struct nvme_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]);
+
+	memcpy(token->subsys, "nvme", 4);
+	token->ns = ns;
+	token->src_sector = bio->bi_iter.bi_sector;
+	token->sectors = bio->bi_iter.bi_size >> 9;
+
+	return BLK_STS_OK;
+}
+
+static inline blk_status_t nvme_setup_copy_write(struct nvme_ns *ns,
+	       struct request *req, struct nvme_command *cmnd)
+{
+	struct nvme_copy_range *range = NULL;
+	struct bio *bio = req->bio;
+	struct nvme_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]);
+	sector_t src_sector, dst_sector, n_sectors;
+	u64 src_lba, dst_lba, n_lba;
+	unsigned short nr_range = 1;
+	u16 control = 0;
+
+	if (unlikely(memcmp(token->subsys, "nvme", 4)))
+		return BLK_STS_NOTSUPP;
+	if (unlikely(token->ns != ns))
+		return BLK_STS_NOTSUPP;
+
+	src_sector = token->src_sector;
+	dst_sector = bio->bi_iter.bi_sector;
+	n_sectors = token->sectors;
+	if (WARN_ON(n_sectors != bio->bi_iter.bi_size >> 9))
+		return BLK_STS_NOTSUPP;
+
+	src_lba = nvme_sect_to_lba(ns, src_sector);
+	dst_lba = nvme_sect_to_lba(ns, dst_sector);
+	n_lba = nvme_sect_to_lba(ns, n_sectors);
+
+	if (WARN_ON(!n_lba))
+		return BLK_STS_NOTSUPP;
+
+	if (req->cmd_flags & REQ_FUA)
+		control |= NVME_RW_FUA;
+
+	if (req->cmd_flags & REQ_FAILFAST_DEV)
+		control |= NVME_RW_LR;
+
+	memset(cmnd, 0, sizeof(*cmnd));
+	cmnd->copy.opcode = nvme_cmd_copy;
+	cmnd->copy.nsid = cpu_to_le32(ns->head->ns_id);
+	cmnd->copy.sdlba = cpu_to_le64(dst_lba);
+
+	range = kmalloc_array(nr_range, sizeof(*range),
+			GFP_ATOMIC | __GFP_NOWARN);
+	if (!range)
+		return BLK_STS_RESOURCE;
+
+	range[0].slba = cpu_to_le64(src_lba);
+	range[0].nlb = cpu_to_le16(n_lba - 1);
+
+	cmnd->copy.nr_range = 0;
+
+	req->special_vec.bv_page = virt_to_page(range);
+	req->special_vec.bv_offset = offset_in_page(range);
+	req->special_vec.bv_len = sizeof(*range) * nr_range;
+	req->rq_flags |= RQF_SPECIAL_PAYLOAD;
+
+	cmnd->copy.control = cpu_to_le16(control);
+
+	return BLK_STS_OK;
+}
+
 static blk_status_t nvme_setup_discard(struct nvme_ns *ns, struct request *req,
 		struct nvme_command *cmnd)
 {
@@ -988,10 +1062,16 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req)
 		ret = nvme_setup_discard(ns, req, cmd);
 		break;
 	case REQ_OP_READ:
-		ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_read);
+		if (unlikely(req->cmd_flags & REQ_COPY))
+			ret = nvme_setup_copy_read(ns, req);
+		else
+			ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_read);
 		break;
 	case REQ_OP_WRITE:
-		ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_write);
+		if (unlikely(req->cmd_flags & REQ_COPY))
+			ret = nvme_setup_copy_write(ns, req, cmd);
+		else
+			ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_write);
 		break;
 	case REQ_OP_ZONE_APPEND:
 		ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_zone_append);
@@ -1698,6 +1778,26 @@ static void nvme_config_discard(struct gendisk *disk, struct nvme_ns *ns)
 		blk_queue_max_write_zeroes_sectors(queue, UINT_MAX);
 }
 
+static void nvme_config_copy(struct gendisk *disk, struct nvme_ns *ns,
+				       struct nvme_id_ns *id)
+{
+	struct nvme_ctrl *ctrl = ns->ctrl;
+	struct request_queue *q = disk->queue;
+
+	if (!(ctrl->oncs & NVME_CTRL_ONCS_COPY)) {
+		blk_queue_max_copy_sectors_hw(q, 0);
+		blk_queue_flag_clear(QUEUE_FLAG_COPY, q);
+		return;
+	}
+
+	/* setting copy limits */
+	if (blk_queue_flag_test_and_set(QUEUE_FLAG_COPY, q))
+		return;
+
+	blk_queue_max_copy_sectors_hw(q,
+		nvme_lba_to_sect(ns, le16_to_cpu(id->mssrl)));
+}
+
 static bool nvme_ns_ids_equal(struct nvme_ns_ids *a, struct nvme_ns_ids *b)
 {
 	return uuid_equal(&a->uuid, &b->uuid) &&
@@ -1897,6 +1997,7 @@ static void nvme_update_disk_info(struct gendisk *disk,
 	set_capacity_and_notify(disk, capacity);
 
 	nvme_config_discard(disk, ns);
+	nvme_config_copy(disk, ns, id);
 	blk_queue_max_write_zeroes_sectors(disk->queue,
 					   ns->ctrl->max_zeroes_sectors);
 }
@@ -5346,6 +5447,7 @@ static inline void _nvme_check_size(void)
 	BUILD_BUG_ON(sizeof(struct nvme_download_firmware) != 64);
 	BUILD_BUG_ON(sizeof(struct nvme_format_cmd) != 64);
 	BUILD_BUG_ON(sizeof(struct nvme_dsm_cmd) != 64);
+	BUILD_BUG_ON(sizeof(struct nvme_copy_command) != 64);
 	BUILD_BUG_ON(sizeof(struct nvme_write_zeroes_cmd) != 64);
 	BUILD_BUG_ON(sizeof(struct nvme_abort_cmd) != 64);
 	BUILD_BUG_ON(sizeof(struct nvme_get_log_page_command) != 64);
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index 2ed75923507d..db2e22b4ca7f 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -2807,6 +2807,11 @@ nvme_fc_queue_rq(struct blk_mq_hw_ctx *hctx,
 	if (ret)
 		return ret;
 
+	if (unlikely((rq->cmd_flags & REQ_COPY) &&
+				(req_op(rq) == REQ_OP_READ))) {
+		blk_mq_end_request(rq, BLK_STS_OK);
+		return BLK_STS_OK;
+	}
 	/*
 	 * nvme core doesn't quite treat the rq opaquely. Commands such
 	 * as WRITE ZEROES will return a non-zero rq payload_bytes yet
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index bf46f122e9e1..257f91ee1f2d 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -500,6 +500,13 @@ struct nvme_ns {
 
 };
 
+struct nvme_copy_token {
+	char subsys[4];
+	struct nvme_ns *ns;
+	u64 src_sector;
+	u64 sectors;
+};
+
 /* NVMe ns supports metadata actions by the controller (generate/strip) */
 static inline bool nvme_ns_has_pi(struct nvme_ns *ns)
 {
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 282d808400c5..9fdf56256cdb 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -496,16 +496,19 @@ static inline void nvme_sq_copy_cmd(struct nvme_queue *nvmeq,
 		nvmeq->sq_tail = 0;
 }
 
-static void nvme_commit_rqs(struct blk_mq_hw_ctx *hctx)
+static inline void nvme_commit_sq_db(struct nvme_queue *nvmeq)
 {
-	struct nvme_queue *nvmeq = hctx->driver_data;
-
 	spin_lock(&nvmeq->sq_lock);
 	if (nvmeq->sq_tail != nvmeq->last_sq_tail)
 		nvme_write_sq_db(nvmeq, true);
 	spin_unlock(&nvmeq->sq_lock);
 }
 
+static void nvme_commit_rqs(struct blk_mq_hw_ctx *hctx)
+{
+	nvme_commit_sq_db(hctx->driver_data);
+}
+
 static inline bool nvme_pci_use_sgls(struct nvme_dev *dev, struct request *req,
 				     int nseg)
 {
@@ -849,6 +852,12 @@ static blk_status_t nvme_prep_rq(struct nvme_dev *dev, struct request *req)
 	if (ret)
 		return ret;
 
+	if (unlikely((req->cmd_flags & REQ_COPY) &&
+				(req_op(req) == REQ_OP_READ))) {
+		blk_mq_start_request(req);
+		return BLK_STS_OK;
+	}
+
 	if (blk_rq_nr_phys_segments(req)) {
 		ret = nvme_map_data(dev, req, &iod->cmd);
 		if (ret)
@@ -895,6 +904,18 @@ static blk_status_t nvme_queue_rq(struct blk_mq_hw_ctx *hctx,
 	ret = nvme_prep_rq(dev, req);
 	if (unlikely(ret))
 		return ret;
+	if (unlikely((req->cmd_flags & REQ_COPY) &&
+				(req_op(req) == REQ_OP_READ))) {
+		blk_mq_set_request_complete(req);
+		blk_mq_end_request(req, BLK_STS_OK);
+		/* Commit the sq if copy read was the last req in the list,
+		 * as copy read deoesn't update sq db
+		 */
+		if (bd->last)
+			nvme_commit_sq_db(nvmeq);
+		return ret;
+	}
+
 	spin_lock(&nvmeq->sq_lock);
 	nvme_sq_copy_cmd(nvmeq, &iod->cmd);
 	nvme_write_sq_db(nvmeq, bd->last);
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index bbad26b82b56..a8bf2a87f42a 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -2043,6 +2043,13 @@ static blk_status_t nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx,
 
 	nvme_start_request(rq);
 
+	if (unlikely((rq->cmd_flags & REQ_COPY) &&
+				(req_op(rq) == REQ_OP_READ))) {
+		blk_mq_end_request(rq, BLK_STS_OK);
+		ret = BLK_STS_OK;
+		goto unmap_qe;
+	}
+
 	if (IS_ENABLED(CONFIG_BLK_DEV_INTEGRITY) &&
 	    queue->pi_support &&
 	    (c->common.opcode == nvme_cmd_write ||
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 49c9e7bc9116..aaeb761c56a1 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -2370,6 +2370,11 @@ static blk_status_t nvme_tcp_setup_cmd_pdu(struct nvme_ns *ns,
 	if (ret)
 		return ret;
 
+	if (unlikely((rq->cmd_flags & REQ_COPY) &&
+				(req_op(rq) == REQ_OP_READ))) {
+		return BLK_STS_OK;
+	}
+
 	req->state = NVME_TCP_SEND_CMD_PDU;
 	req->status = cpu_to_le16(NVME_SC_SUCCESS);
 	req->offset = 0;
@@ -2438,6 +2443,17 @@ static blk_status_t nvme_tcp_queue_rq(struct blk_mq_hw_ctx *hctx,
 
 	nvme_start_request(rq);
 
+	if (unlikely((rq->cmd_flags & REQ_COPY) &&
+				(req_op(rq) == REQ_OP_READ))) {
+		blk_mq_set_request_complete(rq);
+		blk_mq_end_request(rq, BLK_STS_OK);
+		/* if copy read is the last req queue tcp reqs */
+		if (bd->last && nvme_tcp_queue_more(queue))
+			queue_work_on(queue->io_cpu, nvme_tcp_wq,
+					&queue->io_work);
+		return ret;
+	}
+
 	nvme_tcp_queue_request(req, true, bd->last);
 
 	return BLK_STS_OK;
diff --git a/drivers/nvme/host/trace.c b/drivers/nvme/host/trace.c
index 1c36fcedea20..da4a7494e5a7 100644
--- a/drivers/nvme/host/trace.c
+++ b/drivers/nvme/host/trace.c
@@ -150,6 +150,23 @@ static const char *nvme_trace_read_write(struct trace_seq *p, u8 *cdw10)
 	return ret;
 }
 
+static const char *nvme_trace_copy(struct trace_seq *p, u8 *cdw10)
+{
+	const char *ret = trace_seq_buffer_ptr(p);
+	u64 slba = get_unaligned_le64(cdw10);
+	u8 nr_range = get_unaligned_le16(cdw10 + 8);
+	u16 control = get_unaligned_le16(cdw10 + 10);
+	u32 dsmgmt = get_unaligned_le32(cdw10 + 12);
+	u32 reftag = get_unaligned_le32(cdw10 +  16);
+
+	trace_seq_printf(p,
+			 "slba=%llu, nr_range=%u, ctrl=0x%x, dsmgmt=%u, reftag=%u",
+			 slba, nr_range, control, dsmgmt, reftag);
+	trace_seq_putc(p, 0);
+
+	return ret;
+}
+
 static const char *nvme_trace_dsm(struct trace_seq *p, u8 *cdw10)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
@@ -243,6 +260,8 @@ const char *nvme_trace_parse_nvm_cmd(struct trace_seq *p,
 		return nvme_trace_zone_mgmt_send(p, cdw10);
 	case nvme_cmd_zone_mgmt_recv:
 		return nvme_trace_zone_mgmt_recv(p, cdw10);
+	case nvme_cmd_copy:
+		return nvme_trace_copy(p, cdw10);
 	default:
 		return nvme_trace_common(p, cdw10);
 	}
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index 779507ac750b..6582b26e532c 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -337,7 +337,7 @@ struct nvme_id_ctrl {
 	__u8			nvscc;
 	__u8			nwpc;
 	__le16			acwu;
-	__u8			rsvd534[2];
+	__le16			ocfs;
 	__le32			sgls;
 	__le32			mnan;
 	__u8			rsvd544[224];
@@ -365,6 +365,7 @@ enum {
 	NVME_CTRL_ONCS_WRITE_ZEROES		= 1 << 3,
 	NVME_CTRL_ONCS_RESERVATIONS		= 1 << 5,
 	NVME_CTRL_ONCS_TIMESTAMP		= 1 << 6,
+	NVME_CTRL_ONCS_COPY			= 1 << 8,
 	NVME_CTRL_VWC_PRESENT			= 1 << 0,
 	NVME_CTRL_OACS_SEC_SUPP                 = 1 << 0,
 	NVME_CTRL_OACS_NS_MNGT_SUPP		= 1 << 3,
@@ -414,7 +415,10 @@ struct nvme_id_ns {
 	__le16			npdg;
 	__le16			npda;
 	__le16			nows;
-	__u8			rsvd74[18];
+	__le16			mssrl;
+	__le32			mcl;
+	__u8			msrc;
+	__u8			rsvd91[11];
 	__le32			anagrpid;
 	__u8			rsvd96[3];
 	__u8			nsattr;
@@ -796,6 +800,7 @@ enum nvme_opcode {
 	nvme_cmd_resv_report	= 0x0e,
 	nvme_cmd_resv_acquire	= 0x11,
 	nvme_cmd_resv_release	= 0x15,
+	nvme_cmd_copy		= 0x19,
 	nvme_cmd_zone_mgmt_send	= 0x79,
 	nvme_cmd_zone_mgmt_recv	= 0x7a,
 	nvme_cmd_zone_append	= 0x7d,
@@ -819,7 +824,8 @@ enum nvme_opcode {
 		nvme_opcode_name(nvme_cmd_resv_release),	\
 		nvme_opcode_name(nvme_cmd_zone_mgmt_send),	\
 		nvme_opcode_name(nvme_cmd_zone_mgmt_recv),	\
-		nvme_opcode_name(nvme_cmd_zone_append))
+		nvme_opcode_name(nvme_cmd_zone_append),		\
+		nvme_opcode_name(nvme_cmd_copy))
 
 
 
@@ -996,6 +1002,36 @@ struct nvme_dsm_range {
 	__le64			slba;
 };
 
+struct nvme_copy_command {
+	__u8                    opcode;
+	__u8                    flags;
+	__u16                   command_id;
+	__le32                  nsid;
+	__u64                   rsvd2;
+	__le64                  metadata;
+	union nvme_data_ptr     dptr;
+	__le64                  sdlba;
+	__u8			nr_range;
+	__u8			rsvd12;
+	__le16                  control;
+	__le16                  rsvd13;
+	__le16			dspec;
+	__le32                  ilbrt;
+	__le16                  lbat;
+	__le16                  lbatm;
+};
+
+struct nvme_copy_range {
+	__le64			rsvd0;
+	__le64			slba;
+	__le16			nlb;
+	__le16			rsvd18;
+	__le32			rsvd20;
+	__le32			eilbrt;
+	__le16			elbat;
+	__le16			elbatm;
+};
+
 struct nvme_write_zeroes_cmd {
 	__u8			opcode;
 	__u8			flags;
@@ -1757,6 +1793,7 @@ struct nvme_command {
 		struct nvme_download_firmware dlfw;
 		struct nvme_format_cmd format;
 		struct nvme_dsm_cmd dsm;
+		struct nvme_copy_command copy;
 		struct nvme_write_zeroes_cmd write_zeroes;
 		struct nvme_zone_mgmt_send_cmd zms;
 		struct nvme_zone_mgmt_recv_cmd zmr;
-- 
2.35.1.500.gb896f729e2

[PATCH v9 6/9] nvmet: add copy command support for bdev and file ns

[Anuj Gupta]

From: Nitesh Shetty <nj.shetty@samsung.com>

Add support for handling target command on target.
For bdev-ns we call into blkdev_issue_copy, which the block layer
completes by a offloaded copy request to backend bdev or by emulating the
request.

For file-ns we call vfs_copy_file_range to service our request.

Currently target always shows copy capability by setting
NVME_CTRL_ONCS_COPY in controller ONCS.

Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
---
 drivers/nvme/target/admin-cmd.c   |  9 +++--
 drivers/nvme/target/io-cmd-bdev.c | 58 +++++++++++++++++++++++++++++++
 drivers/nvme/target/io-cmd-file.c | 52 +++++++++++++++++++++++++++
 drivers/nvme/target/loop.c        |  6 ++++
 drivers/nvme/target/nvmet.h       |  1 +
 5 files changed, 124 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
index 80099df37314..978786ec6a9e 100644
--- a/drivers/nvme/target/admin-cmd.c
+++ b/drivers/nvme/target/admin-cmd.c
@@ -433,8 +433,7 @@ static void nvmet_execute_identify_ctrl(struct nvmet_req *req)
 	id->nn = cpu_to_le32(NVMET_MAX_NAMESPACES);
 	id->mnan = cpu_to_le32(NVMET_MAX_NAMESPACES);
 	id->oncs = cpu_to_le16(NVME_CTRL_ONCS_DSM |
-			NVME_CTRL_ONCS_WRITE_ZEROES);
-
+			NVME_CTRL_ONCS_WRITE_ZEROES | NVME_CTRL_ONCS_COPY);
 	/* XXX: don't report vwc if the underlying device is write through */
 	id->vwc = NVME_CTRL_VWC_PRESENT;
 
@@ -536,6 +535,12 @@ static void nvmet_execute_identify_ns(struct nvmet_req *req)
 
 	if (req->ns->bdev)
 		nvmet_bdev_set_limits(req->ns->bdev, id);
+	else {
+		id->msrc = (u8)to0based(BIO_MAX_VECS - 1);
+		id->mssrl = cpu_to_le16(BIO_MAX_VECS <<
+				(PAGE_SHIFT - SECTOR_SHIFT));
+		id->mcl = cpu_to_le32(le16_to_cpu(id->mssrl));
+	}
 
 	/*
 	 * We just provide a single LBA format that matches what the
diff --git a/drivers/nvme/target/io-cmd-bdev.c b/drivers/nvme/target/io-cmd-bdev.c
index c2d6cea0236b..0af273097aa4 100644
--- a/drivers/nvme/target/io-cmd-bdev.c
+++ b/drivers/nvme/target/io-cmd-bdev.c
@@ -46,6 +46,19 @@ void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id)
 	id->npda = id->npdg;
 	/* NOWS = Namespace Optimal Write Size */
 	id->nows = to0based(bdev_io_opt(bdev) / bdev_logical_block_size(bdev));
+
+	/*Copy limits*/
+	if (bdev_max_copy_sectors(bdev)) {
+		id->msrc = id->msrc;
+		id->mssrl = cpu_to_le16((bdev_max_copy_sectors(bdev) <<
+				SECTOR_SHIFT) / bdev_logical_block_size(bdev));
+		id->mcl = cpu_to_le32(id->mssrl);
+	} else {
+		id->msrc = (u8)to0based(BIO_MAX_VECS - 1);
+		id->mssrl = cpu_to_le16((BIO_MAX_VECS << PAGE_SHIFT) /
+				bdev_logical_block_size(bdev));
+		id->mcl = cpu_to_le32(id->mssrl);
+	}
 }
 
 void nvmet_bdev_ns_disable(struct nvmet_ns *ns)
@@ -184,6 +197,19 @@ static void nvmet_bio_done(struct bio *bio)
 	nvmet_req_bio_put(req, bio);
 }
 
+static void nvmet_bdev_copy_end_io(void *private, int comp_len)
+{
+	struct nvmet_req *req = (struct nvmet_req *)private;
+
+	if (comp_len == req->copy_len) {
+		req->cqe->result.u32 = cpu_to_le32(1);
+		nvmet_req_complete(req, errno_to_nvme_status(req, 0));
+	} else {
+		req->cqe->result.u32 = cpu_to_le32(0);
+		nvmet_req_complete(req, blk_to_nvme_status(req, BLK_STS_IOERR));
+	}
+}
+
 #ifdef CONFIG_BLK_DEV_INTEGRITY
 static int nvmet_bdev_alloc_bip(struct nvmet_req *req, struct bio *bio,
 				struct sg_mapping_iter *miter)
@@ -450,6 +476,34 @@ static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req)
 	}
 }
 
+/* At present we handle only one range entry */
+static void nvmet_bdev_execute_copy(struct nvmet_req *req)
+{
+	struct nvme_copy_range range;
+	struct nvme_command *cmnd = req->cmd;
+	int ret;
+
+
+	ret = nvmet_copy_from_sgl(req, 0, &range, sizeof(range));
+	if (ret)
+		goto out;
+
+	ret = blkdev_issue_copy(req->ns->bdev,
+		le64_to_cpu(cmnd->copy.sdlba) << req->ns->blksize_shift,
+		req->ns->bdev,
+		le64_to_cpu(range.slba) << req->ns->blksize_shift,
+		(le16_to_cpu(range.nlb) + 1) << req->ns->blksize_shift,
+		nvmet_bdev_copy_end_io, (void *)req, GFP_KERNEL);
+	if (ret) {
+		req->cqe->result.u32 = cpu_to_le32(0);
+		nvmet_req_complete(req, blk_to_nvme_status(req, BLK_STS_IOERR));
+	}
+
+	return;
+out:
+	nvmet_req_complete(req, errno_to_nvme_status(req, ret));
+}
+
 u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req)
 {
 	switch (req->cmd->common.opcode) {
@@ -468,6 +522,10 @@ u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req)
 	case nvme_cmd_write_zeroes:
 		req->execute = nvmet_bdev_execute_write_zeroes;
 		return 0;
+	case nvme_cmd_copy:
+		req->execute = nvmet_bdev_execute_copy;
+		return 0;
+
 	default:
 		return nvmet_report_invalid_opcode(req);
 	}
diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
index 2d068439b129..69f198ecec77 100644
--- a/drivers/nvme/target/io-cmd-file.c
+++ b/drivers/nvme/target/io-cmd-file.c
@@ -322,6 +322,49 @@ static void nvmet_file_dsm_work(struct work_struct *w)
 	}
 }
 
+static void nvmet_file_copy_work(struct work_struct *w)
+{
+	struct nvmet_req *req = container_of(w, struct nvmet_req, f.work);
+	int nr_range;
+	loff_t pos;
+	struct nvme_command *cmnd = req->cmd;
+	int ret = 0, len = 0, src, id;
+
+	nr_range = cmnd->copy.nr_range + 1;
+	pos = le64_to_cpu(req->cmd->copy.sdlba) << req->ns->blksize_shift;
+	if (unlikely(pos + req->transfer_len > req->ns->size)) {
+		nvmet_req_complete(req, errno_to_nvme_status(req, -ENOSPC));
+		return;
+	}
+
+	for (id = 0 ; id < nr_range; id++) {
+		struct nvme_copy_range range;
+
+		ret = nvmet_copy_from_sgl(req, id * sizeof(range), &range,
+					sizeof(range));
+		if (ret)
+			goto out;
+
+		len = (le16_to_cpu(range.nlb) + 1) << (req->ns->blksize_shift);
+		src = (le64_to_cpu(range.slba) << (req->ns->blksize_shift));
+		ret = vfs_copy_file_range(req->ns->file, src, req->ns->file,
+					pos, len, 0);
+out:
+		if (ret != len) {
+			pos += ret;
+			req->cqe->result.u32 = cpu_to_le32(id);
+			nvmet_req_complete(req, ret < 0 ?
+					errno_to_nvme_status(req, ret) :
+					errno_to_nvme_status(req, -EIO));
+			return;
+
+		} else
+			pos += len;
+	}
+
+	nvmet_req_complete(req, 0);
+
+}
 static void nvmet_file_execute_dsm(struct nvmet_req *req)
 {
 	if (!nvmet_check_data_len_lte(req, nvmet_dsm_len(req)))
@@ -330,6 +373,12 @@ static void nvmet_file_execute_dsm(struct nvmet_req *req)
 	queue_work(nvmet_wq, &req->f.work);
 }
 
+static void nvmet_file_execute_copy(struct nvmet_req *req)
+{
+	INIT_WORK(&req->f.work, nvmet_file_copy_work);
+	queue_work(nvmet_wq, &req->f.work);
+}
+
 static void nvmet_file_write_zeroes_work(struct work_struct *w)
 {
 	struct nvmet_req *req = container_of(w, struct nvmet_req, f.work);
@@ -376,6 +425,9 @@ u16 nvmet_file_parse_io_cmd(struct nvmet_req *req)
 	case nvme_cmd_write_zeroes:
 		req->execute = nvmet_file_execute_write_zeroes;
 		return 0;
+	case nvme_cmd_copy:
+		req->execute = nvmet_file_execute_copy;
+		return 0;
 	default:
 		return nvmet_report_invalid_opcode(req);
 	}
diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c
index f2d24b2d992f..d18ed8067a15 100644
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -146,6 +146,12 @@ static blk_status_t nvme_loop_queue_rq(struct blk_mq_hw_ctx *hctx,
 		return ret;
 
 	nvme_start_request(req);
+	if (unlikely((req->cmd_flags & REQ_COPY) &&
+				(req_op(req) == REQ_OP_READ))) {
+		blk_mq_set_request_complete(req);
+		blk_mq_end_request(req, BLK_STS_OK);
+		return BLK_STS_OK;
+	}
 	iod->cmd.common.flags |= NVME_CMD_SGL_METABUF;
 	iod->req.port = queue->ctrl->port;
 	if (!nvmet_req_init(&iod->req, &queue->nvme_cq,
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index 89bedfcd974c..69ed4c8469e5 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -393,6 +393,7 @@ struct nvmet_req {
 	struct device		*p2p_client;
 	u16			error_loc;
 	u64			error_slba;
+	size_t			copy_len;
 };
 
 #define NVMET_MAX_MPOOL_BVEC		16
-- 
2.35.1.500.gb896f729e2

[PATCH v9 7/9] dm: Add support for copy offload

[Anuj Gupta]

From: Nitesh Shetty <nj.shetty@samsung.com>

Before enabling copy for dm target, check if underlying devices and
dm target support copy. Avoid split happening inside dm target.
Fail early if the request needs split, currently splitting copy
request is not supported.

Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
 drivers/md/dm-table.c         | 41 +++++++++++++++++++++++++++++++++++
 drivers/md/dm.c               |  7 ++++++
 include/linux/device-mapper.h |  5 +++++
 3 files changed, 53 insertions(+)

diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 1398f1d6e83e..b3269271e761 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1867,6 +1867,39 @@ static bool dm_table_supports_nowait(struct dm_table *t)
 	return true;
 }
 
+static int device_not_copy_capable(struct dm_target *ti, struct dm_dev *dev,
+				      sector_t start, sector_t len, void *data)
+{
+	struct request_queue *q = bdev_get_queue(dev->bdev);
+
+	return !blk_queue_copy(q);
+}
+
+static bool dm_table_supports_copy(struct dm_table *t)
+{
+	struct dm_target *ti;
+	unsigned int i;
+
+	for (i = 0; i < t->num_targets; i++) {
+		ti = dm_table_get_target(t, i);
+
+		if (!ti->copy_offload_supported)
+			return false;
+
+		/*
+		 * target provides copy support (as implied by setting
+		 * 'copy_offload_supported')
+		 * and it relies on _all_ data devices having copy support.
+		 */
+		if (!ti->type->iterate_devices ||
+		     ti->type->iterate_devices(ti,
+			     device_not_copy_capable, NULL))
+			return false;
+	}
+
+	return true;
+}
+
 static int device_not_discard_capable(struct dm_target *ti, struct dm_dev *dev,
 				      sector_t start, sector_t len, void *data)
 {
@@ -1949,6 +1982,14 @@ int dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
 		q->limits.discard_misaligned = 0;
 	}
 
+	if (!dm_table_supports_copy(t)) {
+		blk_queue_flag_clear(QUEUE_FLAG_COPY, q);
+		q->limits.max_copy_sectors = 0;
+		q->limits.max_copy_sectors_hw = 0;
+	} else {
+		blk_queue_flag_set(QUEUE_FLAG_COPY, q);
+	}
+
 	if (!dm_table_supports_secure_erase(t))
 		q->limits.max_secure_erase_sectors = 0;
 
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 20c6b72a0245..1492bea4d605 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1709,6 +1709,13 @@ static blk_status_t __split_and_process_bio(struct clone_info *ci)
 	if (unlikely(ci->is_abnormal_io))
 		return __process_abnormal_io(ci, ti);
 
+	if ((unlikely(op_is_copy(ci->bio->bi_opf)) &&
+			max_io_len(ti, ci->sector) < ci->sector_count)) {
+		DMERR("Error, IO size(%u) > max target size(%llu)\n",
+			ci->sector_count, max_io_len(ti, ci->sector));
+		return BLK_STS_IOERR;
+	}
+
 	/*
 	 * Only support bio polling for normal IO, and the target io is
 	 * exactly inside the dm_io instance (verified in dm_poll_dm_io)
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 8aa6b3ea91fa..70142fff417c 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -386,6 +386,11 @@ struct dm_target {
 	 * bio_set_dev(). NOTE: ideally a target should _not_ need this.
 	 */
 	bool needs_bio_set_dev:1;
+
+	/*
+	 * copy offload is supported
+	 */
+	bool copy_offload_supported:1;
 };
 
 void *dm_per_bio_data(struct bio *bio, size_t data_size);
-- 
2.35.1.500.gb896f729e2

[PATCH v9 8/9] dm: Enable copy offload for dm-linear target

[Anuj Gupta]

From: Nitesh Shetty <nj.shetty@samsung.com>

Setting copy_offload_supported flag to enable offload.

Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
 drivers/md/dm-linear.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index f4448d520ee9..1d1ee30bbefb 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -62,6 +62,7 @@ static int linear_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	ti->num_discard_bios = 1;
 	ti->num_secure_erase_bios = 1;
 	ti->num_write_zeroes_bios = 1;
+	ti->copy_offload_supported = 1;
 	ti->private = lc;
 	return 0;
 
-- 
2.35.1.500.gb896f729e2

[PATCH v9 9/9] null_blk: add support for copy offload

[Anuj Gupta]

From: Nitesh Shetty <nj.shetty@samsung.com>

Implementaion is based on existing read and write infrastructure.
copy_max_bytes: A new configfs and module parameter is introduced, which
can be used to set hardware/driver supported maximum copy limit.

Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
---
 drivers/block/null_blk/main.c     | 101 ++++++++++++++++++++++++++++++
 drivers/block/null_blk/null_blk.h |   8 +++
 2 files changed, 109 insertions(+)

diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
index bc2c58724df3..e273e18ace74 100644
--- a/drivers/block/null_blk/main.c
+++ b/drivers/block/null_blk/main.c
@@ -157,6 +157,10 @@ static int g_max_sectors;
 module_param_named(max_sectors, g_max_sectors, int, 0444);
 MODULE_PARM_DESC(max_sectors, "Maximum size of a command (in 512B sectors)");
 
+static int g_copy_max_bytes = COPY_MAX_BYTES;
+module_param_named(copy_max_bytes, g_copy_max_bytes, int, 0444);
+MODULE_PARM_DESC(copy_max_bytes, "Maximum size of a copy command (in bytes)");
+
 static unsigned int nr_devices = 1;
 module_param(nr_devices, uint, 0444);
 MODULE_PARM_DESC(nr_devices, "Number of devices to register");
@@ -409,6 +413,7 @@ NULLB_DEVICE_ATTR(home_node, uint, NULL);
 NULLB_DEVICE_ATTR(queue_mode, uint, NULL);
 NULLB_DEVICE_ATTR(blocksize, uint, NULL);
 NULLB_DEVICE_ATTR(max_sectors, uint, NULL);
+NULLB_DEVICE_ATTR(copy_max_bytes, uint, NULL);
 NULLB_DEVICE_ATTR(irqmode, uint, NULL);
 NULLB_DEVICE_ATTR(hw_queue_depth, uint, NULL);
 NULLB_DEVICE_ATTR(index, uint, NULL);
@@ -550,6 +555,7 @@ static struct configfs_attribute *nullb_device_attrs[] = {
 	&nullb_device_attr_queue_mode,
 	&nullb_device_attr_blocksize,
 	&nullb_device_attr_max_sectors,
+	&nullb_device_attr_copy_max_bytes,
 	&nullb_device_attr_irqmode,
 	&nullb_device_attr_hw_queue_depth,
 	&nullb_device_attr_index,
@@ -631,6 +637,7 @@ static ssize_t memb_group_features_show(struct config_item *item, char *page)
 			"badblocks,blocking,blocksize,cache_size,"
 			"completion_nsec,discard,home_node,hw_queue_depth,"
 			"irqmode,max_sectors,mbps,memory_backed,no_sched,"
+			"copy_max_bytes,"
 			"poll_queues,power,queue_mode,shared_tag_bitmap,size,"
 			"submit_queues,use_per_node_hctx,virt_boundary,zoned,"
 			"zone_capacity,zone_max_active,zone_max_open,"
@@ -693,6 +700,7 @@ static struct nullb_device *null_alloc_dev(void)
 	dev->queue_mode = g_queue_mode;
 	dev->blocksize = g_bs;
 	dev->max_sectors = g_max_sectors;
+	dev->copy_max_bytes = g_copy_max_bytes;
 	dev->irqmode = g_irqmode;
 	dev->hw_queue_depth = g_hw_queue_depth;
 	dev->blocking = g_blocking;
@@ -1242,6 +1250,81 @@ static int null_transfer(struct nullb *nullb, struct page *page,
 	return err;
 }
 
+static inline int nullb_setup_copy_read(struct nullb *nullb,
+		struct bio *bio)
+{
+	struct nullb_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]);
+
+	memcpy(token->subsys, "nullb", 5);
+	token->sector_in = bio->bi_iter.bi_sector;
+	token->nullb = nullb;
+	token->sectors = bio->bi_iter.bi_size >> SECTOR_SHIFT;
+
+	return 0;
+}
+
+static inline int nullb_setup_copy_write(struct nullb *nullb,
+		struct bio *bio, bool is_fua)
+{
+	struct nullb_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]);
+	sector_t sector_in, sector_out;
+	void *in, *out;
+	size_t rem, temp;
+	unsigned long offset_in, offset_out;
+	struct nullb_page *t_page_in, *t_page_out;
+	int ret = -EIO;
+
+	if (unlikely(memcmp(token->subsys, "nullb", 5)))
+		return -EINVAL;
+	if (unlikely(token->nullb != nullb))
+		return -EINVAL;
+	if (WARN_ON(token->sectors != bio->bi_iter.bi_size >> SECTOR_SHIFT))
+		return -EINVAL;
+
+	sector_in = token->sector_in;
+	sector_out = bio->bi_iter.bi_sector;
+	rem = token->sectors << SECTOR_SHIFT;
+
+	spin_lock_irq(&nullb->lock);
+	while (rem > 0) {
+		temp = min_t(size_t, nullb->dev->blocksize, rem);
+		offset_in = (sector_in & SECTOR_MASK) << SECTOR_SHIFT;
+		offset_out = (sector_out & SECTOR_MASK) << SECTOR_SHIFT;
+
+		if (null_cache_active(nullb) && !is_fua)
+			null_make_cache_space(nullb, PAGE_SIZE);
+
+		t_page_in = null_lookup_page(nullb, sector_in, false,
+			!null_cache_active(nullb));
+		if (!t_page_in)
+			goto err;
+		t_page_out = null_insert_page(nullb, sector_out,
+			!null_cache_active(nullb) || is_fua);
+		if (!t_page_out)
+			goto err;
+
+		in = kmap_local_page(t_page_in->page);
+		out = kmap_local_page(t_page_out->page);
+
+		memcpy(out + offset_out, in + offset_in, temp);
+		kunmap_local(out);
+		kunmap_local(in);
+		__set_bit(sector_out & SECTOR_MASK, t_page_out->bitmap);
+
+		if (is_fua)
+			null_free_sector(nullb, sector_out, true);
+
+		rem -= temp;
+		sector_in += temp >> SECTOR_SHIFT;
+		sector_out += temp >> SECTOR_SHIFT;
+	}
+
+	ret = 0;
+err:
+	spin_unlock_irq(&nullb->lock);
+	return ret;
+}
+
 static int null_handle_rq(struct nullb_cmd *cmd)
 {
 	struct request *rq = cmd->rq;
@@ -1252,6 +1335,13 @@ static int null_handle_rq(struct nullb_cmd *cmd)
 	struct req_iterator iter;
 	struct bio_vec bvec;
 
+	if (rq->cmd_flags & REQ_COPY) {
+		if (op_is_write(req_op(rq)))
+			return nullb_setup_copy_write(nullb, rq->bio,
+						rq->cmd_flags & REQ_FUA);
+		return nullb_setup_copy_read(nullb, rq->bio);
+	}
+
 	spin_lock_irq(&nullb->lock);
 	rq_for_each_segment(bvec, rq, iter) {
 		len = bvec.bv_len;
@@ -1279,6 +1369,13 @@ static int null_handle_bio(struct nullb_cmd *cmd)
 	struct bio_vec bvec;
 	struct bvec_iter iter;
 
+	if (bio->bi_opf & REQ_COPY) {
+		if (op_is_write(bio_op(bio)))
+			return nullb_setup_copy_write(nullb, bio,
+							bio->bi_opf & REQ_FUA);
+		return nullb_setup_copy_read(nullb, bio);
+	}
+
 	spin_lock_irq(&nullb->lock);
 	bio_for_each_segment(bvec, bio, iter) {
 		len = bvec.bv_len;
@@ -2109,6 +2206,10 @@ static int null_add_dev(struct nullb_device *dev)
 		dev->max_sectors = queue_max_hw_sectors(nullb->q);
 	dev->max_sectors = min(dev->max_sectors, BLK_DEF_MAX_SECTORS);
 	blk_queue_max_hw_sectors(nullb->q, dev->max_sectors);
+	blk_queue_max_copy_sectors_hw(nullb->q,
+			       dev->copy_max_bytes >> SECTOR_SHIFT);
+	if (dev->copy_max_bytes)
+		blk_queue_flag_set(QUEUE_FLAG_COPY, nullb->disk->queue);
 
 	if (dev->virt_boundary)
 		blk_queue_virt_boundary(nullb->q, PAGE_SIZE - 1);
diff --git a/drivers/block/null_blk/null_blk.h b/drivers/block/null_blk/null_blk.h
index eb5972c50be8..c67c098d92fa 100644
--- a/drivers/block/null_blk/null_blk.h
+++ b/drivers/block/null_blk/null_blk.h
@@ -67,6 +67,13 @@ enum {
 	NULL_Q_MQ	= 2,
 };
 
+struct nullb_copy_token {
+	char subsys[5];
+	struct nullb *nullb;
+	u64 sector_in;
+	u64 sectors;
+};
+
 struct nullb_device {
 	struct nullb *nullb;
 	struct config_item item;
@@ -102,6 +109,7 @@ struct nullb_device {
 	unsigned int queue_mode; /* block interface */
 	unsigned int blocksize; /* block size */
 	unsigned int max_sectors; /* Max sectors per command */
+	unsigned long copy_max_bytes; /* Max copy offload length in bytes */
 	unsigned int irqmode; /* IRQ completion handler */
 	unsigned int hw_queue_depth; /* queue depth */
 	unsigned int index; /* index of the disk, only valid with a disk */
-- 
2.35.1.500.gb896f729e2

Re: [PATCH v9 9/9] null_blk: add support for copy offload

[Chaitanya Kulkarni]

On 4/11/23 01:10, Anuj Gupta wrote:
> From: Nitesh Shetty <nj.shetty@samsung.com>
>
> Implementaion is based on existing read and write infrastructure.
> copy_max_bytes: A new configfs and module parameter is introduced, which
> can be used to set hardware/driver supported maximum copy limit.
>
> Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
> ---
>   drivers/block/null_blk/main.c     | 101 ++++++++++++++++++++++++++++++
>   drivers/block/null_blk/null_blk.h |   8 +++
>   2 files changed, 109 insertions(+)
>
> diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
> index bc2c58724df3..e273e18ace74 100644
> --- a/drivers/block/null_blk/main.c
> +++ b/drivers/block/null_blk/main.c
> @@ -157,6 +157,10 @@ static int g_max_sectors;
>   module_param_named(max_sectors, g_max_sectors, int, 0444);
>   MODULE_PARM_DESC(max_sectors, "Maximum size of a command (in 512B sectors)");
>   
> +static int g_copy_max_bytes = COPY_MAX_BYTES;

how about following ? matches nullb_device->copy_max_bytes type ..

-static int g_copy_max_bytes = COPY_MAX_BYTES;
-module_param_named(copy_max_bytes, g_copy_max_bytes, int, 0444);
+static unsigned long g_copy_max_bytes = COPY_MAX_BYTES;
+module_param_named(copy_max_bytes, g_copy_max_bytes, ulong, 0444);

[...]

> @@ -631,6 +637,7 @@ static ssize_t memb_group_features_show(struct config_item *item, char *page)
>   			"badblocks,blocking,blocksize,cache_size,"
>   			"completion_nsec,discard,home_node,hw_queue_depth,"
>   			"irqmode,max_sectors,mbps,memory_backed,no_sched,"
> +			"copy_max_bytes,"
>   			"poll_queues,power,queue_mode,shared_tag_bitmap,size,"
>   			"submit_queues,use_per_node_hctx,virt_boundary,zoned,"
>   			"zone_capacity,zone_max_active,zone_max_open,"

why not ?

@@ -637,11 +637,12 @@ static ssize_t memb_group_features_show(struct config_item *item, char *page)
                         "badblocks,blocking,blocksize,cache_size,"
                         "completion_nsec,discard,home_node,hw_queue_depth,"
                         "irqmode,max_sectors,mbps,memory_backed,no_sched,"
-                       "copy_max_bytes,"
                         "poll_queues,power,queue_mode,shared_tag_bitmap,size,"
                         "submit_queues,use_per_node_hctx,virt_boundary,zoned,"
                         "zone_capacity,zone_max_active,zone_max_open,"
-                       "zone_nr_conv,zone_offline,zone_readonly,zone_size\n");
+                       "zone_nr_conv,zone_offline,zone_readonly,zone_size"
+                       "copy_max_bytes\n");
  }
  
[...]
  
+static inline int nullb_setup_copy_read(struct nullb *nullb,
+		struct bio *bio)
+{
+	struct nullb_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]);
+
+	memcpy(token->subsys, "nullb", 5);

do you really need to use memcpy here ? can token->subsys be a pointer
and use with assignment token->subsys = nullb ?

+	token->sector_in = bio->bi_iter.bi_sector;
+	token->nullb = nullb;
+	token->sectors = bio->bi_iter.bi_size >> SECTOR_SHIFT;
+
+	return 0;
+}
+

no point in return 0 , use local bool for fua instead of repeating
expression and no need to fold line for nullb_setup_copy_read()
makes is easy to read and removes extra lines and indentation see below :-

-static inline int nullb_setup_copy_read(struct nullb *nullb,
-               struct bio *bio)
+static inline void nullb_setup_copy_read(struct nullb *nullb, struct bio *bio)
  {
         struct nullb_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]);
  
-       memcpy(token->subsys, "nullb", 5);
+       token->subsys = "nullb;
         token->sector_in = bio->bi_iter.bi_sector;
         token->nullb = nullb;
         token->sectors = bio->bi_iter.bi_size >> SECTOR_SHIFT;
-
-       return 0;
  }
  
  static inline int nullb_setup_copy_write(struct nullb *nullb,
@@ -1334,20 +1331,21 @@ static int null_handle_rq(struct nullb_cmd *cmd)
         sector_t sector = blk_rq_pos(rq);
         struct req_iterator iter;
         struct bio_vec bvec;
+       bool fua = rq->cmd_flags & REQ_FUA;
  
         if (rq->cmd_flags & REQ_COPY) {
                 if (op_is_write(req_op(rq)))
-                       return nullb_setup_copy_write(nullb, rq->bio,
-                                               rq->cmd_flags & REQ_FUA);
-               return nullb_setup_copy_read(nullb, rq->bio);
+                       return nullb_setup_copy_write(nullb, rq->bio, fua);
+
+               nullb_setup_copy_read(nullb, rq->bio);
+               return 0;
         }
  
         spin_lock_irq(&nullb->lock);
         rq_for_each_segment(bvec, rq, iter) {
                 len = bvec.bv_len;
                 err = null_transfer(nullb, bvec.bv_page, len, bvec.bv_offset,
-                                    op_is_write(req_op(rq)), sector,
-                                    rq->cmd_flags & REQ_FUA);
+                                    op_is_write(req_op(rq)), sector, fua);
                 if (err) {
                         spin_unlock_irq(&nullb->lock);
                         return err;
@@ -1368,12 +1366,13 @@ static int null_handle_bio(struct nullb_cmd *cmd)
         sector_t sector = bio->bi_iter.bi_sector;
         struct bio_vec bvec;
         struct bvec_iter iter;
+       bool fua = bio->bi_opf & REQ_FUA
  
         if (bio->bi_opf & REQ_COPY) {
                 if (op_is_write(bio_op(bio)))
-                       return nullb_setup_copy_write(nullb, bio,
-                                                       bio->bi_opf & REQ_FUA);
-               return nullb_setup_copy_read(nullb, bio);
+                       return nullb_setup_copy_write(nullb, bio, fua);
+               nullb_setup_copy_read(nullb, bio);
+               return 0;
         }
  



[...]
  
+struct nullb_copy_token {
+	char subsys[5];
+	struct nullb *nullb;
+	u64 sector_in;
+	u64 sectors;
+};
+

why not use sector_t ?

diff --git a/drivers/block/null_blk/null_blk.h b/drivers/block/null_blk/null_blk.h
index c67c098d92fa..ffa4b6a6d19b 100644
--- a/drivers/block/null_blk/null_blk.h
+++ b/drivers/block/null_blk/null_blk.h
@@ -70,8 +70,8 @@ enum {
  struct nullb_copy_token {
         char subsys[5];
         struct nullb *nullb;
-       u64 sector_in;
-       u64 sectors;
+       sector_t sector_in;
+       sector_t sectors;
  };
  

-ck

Re: [PATCH v9 9/9] null_blk: add support for copy offload

[Nitesh Shetty]

[-- Attachment #1: Type: text/plain, Size: 7120 bytes --]

On 23/04/13 06:28AM, Chaitanya Kulkarni wrote:
>On 4/11/23 01:10, Anuj Gupta wrote:
>> From: Nitesh Shetty <nj.shetty@samsung.com>
>>
>> Implementaion is based on existing read and write infrastructure.
>> copy_max_bytes: A new configfs and module parameter is introduced, which
>> can be used to set hardware/driver supported maximum copy limit.
>>
>> Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
>> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
>> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
>> Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
>> ---
>>   drivers/block/null_blk/main.c     | 101 ++++++++++++++++++++++++++++++
>>   drivers/block/null_blk/null_blk.h |   8 +++
>>   2 files changed, 109 insertions(+)
>>
>> diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
>> index bc2c58724df3..e273e18ace74 100644
>> --- a/drivers/block/null_blk/main.c
>> +++ b/drivers/block/null_blk/main.c
>> @@ -157,6 +157,10 @@ static int g_max_sectors;
>>   module_param_named(max_sectors, g_max_sectors, int, 0444);
>>   MODULE_PARM_DESC(max_sectors, "Maximum size of a command (in 512B sectors)");
>>
>> +static int g_copy_max_bytes = COPY_MAX_BYTES;
>
>how about following ? matches nullb_device->copy_max_bytes type ..
>
>-static int g_copy_max_bytes = COPY_MAX_BYTES;
>-module_param_named(copy_max_bytes, g_copy_max_bytes, int, 0444);
>+static unsigned long g_copy_max_bytes = COPY_MAX_BYTES;
>+module_param_named(copy_max_bytes, g_copy_max_bytes, ulong, 0444);
>
>[...]
>

acked

>> @@ -631,6 +637,7 @@ static ssize_t memb_group_features_show(struct config_item *item, char *page)
>>   			"badblocks,blocking,blocksize,cache_size,"
>>   			"completion_nsec,discard,home_node,hw_queue_depth,"
>>   			"irqmode,max_sectors,mbps,memory_backed,no_sched,"
>> +			"copy_max_bytes,"
>>   			"poll_queues,power,queue_mode,shared_tag_bitmap,size,"
>>   			"submit_queues,use_per_node_hctx,virt_boundary,zoned,"
>>   			"zone_capacity,zone_max_active,zone_max_open,"
>
>why not ?
>
>@@ -637,11 +637,12 @@ static ssize_t memb_group_features_show(struct config_item *item, char *page)
>                         "badblocks,blocking,blocksize,cache_size,"
>                         "completion_nsec,discard,home_node,hw_queue_depth,"
>                         "irqmode,max_sectors,mbps,memory_backed,no_sched,"
>-                       "copy_max_bytes,"
>                         "poll_queues,power,queue_mode,shared_tag_bitmap,size,"
>                         "submit_queues,use_per_node_hctx,virt_boundary,zoned,"
>                         "zone_capacity,zone_max_active,zone_max_open,"
>-                       "zone_nr_conv,zone_offline,zone_readonly,zone_size\n");
>+                       "zone_nr_conv,zone_offline,zone_readonly,zone_size"
>+                       "copy_max_bytes\n");
>  }
>
>[...]
>

acked, one doubt I see checkpatch complains
"WARNING: quoted string split across lines".
Is there any graceful way to avoid this warning ?

>+static inline int nullb_setup_copy_read(struct nullb *nullb,
>+		struct bio *bio)
>+{
>+	struct nullb_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]);
>+
>+	memcpy(token->subsys, "nullb", 5);
>
>do you really need to use memcpy here ? can token->subsys be a pointer
>and use with assignment token->subsys = nullb ?
>

We do have token->nullb, which stores this device.
Idea behind token->subsys is to differentiate between different types of
copies. Like copy between namespace, across namespace etc.

>+	token->sector_in = bio->bi_iter.bi_sector;
>+	token->nullb = nullb;
>+	token->sectors = bio->bi_iter.bi_size >> SECTOR_SHIFT;
>+
>+	return 0;
>+}
>+
>
>no point in return 1 , use local bool for fua instead of repeating
>expression and no need to fold line for nullb_setup_copy_read()
>makes is easy to read and removes extra lines and indentation see below :-
>

acked.

>-static inline int nullb_setup_copy_read(struct nullb *nullb,
>-               struct bio *bio)
>+static inline void nullb_setup_copy_read(struct nullb *nullb, struct bio *bio)
>  {
>         struct nullb_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]);
>
>-       memcpy(token->subsys, "nullb", 5);
>+       token->subsys = "nullb;

if you meant, token->subsys = "nullb", yeah we can add this in next
version.

>         token->sector_in = bio->bi_iter.bi_sector;
>         token->nullb = nullb;
>         token->sectors = bio->bi_iter.bi_size >> SECTOR_SHIFT;
>-
>-       return 0;
>  }
>
>  static inline int nullb_setup_copy_write(struct nullb *nullb,
>@@ -1334,20 +1331,21 @@ static int null_handle_rq(struct nullb_cmd *cmd)
>         sector_t sector = blk_rq_pos(rq);
>         struct req_iterator iter;
>         struct bio_vec bvec;
>+       bool fua = rq->cmd_flags & REQ_FUA;
>
>         if (rq->cmd_flags & REQ_COPY) {
>                 if (op_is_write(req_op(rq)))
>-                       return nullb_setup_copy_write(nullb, rq->bio,
>-                                               rq->cmd_flags & REQ_FUA);
>-               return nullb_setup_copy_read(nullb, rq->bio);
>+                       return nullb_setup_copy_write(nullb, rq->bio, fua);
>+
>+               nullb_setup_copy_read(nullb, rq->bio);
>+               return 0;
>         }
>
>         spin_lock_irq(&nullb->lock);
>         rq_for_each_segment(bvec, rq, iter) {
>                 len = bvec.bv_len;
>                 err = null_transfer(nullb, bvec.bv_page, len, bvec.bv_offset,
>-                                    op_is_write(req_op(rq)), sector,
>-                                    rq->cmd_flags & REQ_FUA);
>+                                    op_is_write(req_op(rq)), sector, fua);
>                 if (err) {
>                         spin_unlock_irq(&nullb->lock);
>                         return err;
>@@ -1368,12 +1366,13 @@ static int null_handle_bio(struct nullb_cmd *cmd)
>         sector_t sector = bio->bi_iter.bi_sector;
>         struct bio_vec bvec;
>         struct bvec_iter iter;
>+       bool fua = bio->bi_opf & REQ_FUA
>
>         if (bio->bi_opf & REQ_COPY) {
>                 if (op_is_write(bio_op(bio)))
>-                       return nullb_setup_copy_write(nullb, bio,
>-                                                       bio->bi_opf & REQ_FUA);
>-               return nullb_setup_copy_read(nullb, bio);
>+                       return nullb_setup_copy_write(nullb, bio, fua);
>+               nullb_setup_copy_read(nullb, bio);
>+               return 0;
>         }
>
>
>
>
>[...]
>

acked

>+struct nullb_copy_token {
>+	char subsys[5];
>+	struct nullb *nullb;
>+	u64 sector_in;
>+	u64 sectors;
>+};
>+
>
>why not use sector_t ?
>
>diff --git a/drivers/block/null_blk/null_blk.h b/drivers/block/null_blk/null_blk.h
>index c67c098d92fa..ffa4b6a6d19b 100644
>--- a/drivers/block/null_blk/null_blk.h
>+++ b/drivers/block/null_blk/null_blk.h
>@@ -70,8 +70,8 @@ enum {
>  struct nullb_copy_token {
>         char subsys[5];
>         struct nullb *nullb;
>-       u64 sector_in;
>-       u64 sectors;
>+       sector_t sector_in;
>+       sector_t sectors;
>  };
>
>

acked

-- Thank you,
-- Nitesh Shetty

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH v9 6/9] nvmet: add copy command support for bdev and file ns

[Chaitanya Kulkarni]

On 4/11/23 01:10, Anuj Gupta wrote:
> From: Nitesh Shetty <nj.shetty@samsung.com>
>
> Add support for handling target command on target.

what is target command ?

command that you have added is :nvme_cmd_copy

> For bdev-ns we call into blkdev_issue_copy, which the block layer
> completes by a offloaded copy request to backend bdev or by emulating the
> request.
>
> For file-ns we call vfs_copy_file_range to service our request.
>
> Currently target always shows copy capability by setting
> NVME_CTRL_ONCS_COPY in controller ONCS.

there is nothing mentioned about target/loop.c in commit log ?

> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
> ---
>   drivers/nvme/target/admin-cmd.c   |  9 +++--
>   drivers/nvme/target/io-cmd-bdev.c | 58 +++++++++++++++++++++++++++++++
>   drivers/nvme/target/io-cmd-file.c | 52 +++++++++++++++++++++++++++
>   drivers/nvme/target/loop.c        |  6 ++++
>   drivers/nvme/target/nvmet.h       |  1 +
>   5 files changed, 124 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
> index 80099df37314..978786ec6a9e 100644
> --- a/drivers/nvme/target/admin-cmd.c
> +++ b/drivers/nvme/target/admin-cmd.c
> @@ -433,8 +433,7 @@ static void nvmet_execute_identify_ctrl(struct nvmet_req *req)
>   	id->nn = cpu_to_le32(NVMET_MAX_NAMESPACES);
>   	id->mnan = cpu_to_le32(NVMET_MAX_NAMESPACES);
>   	id->oncs = cpu_to_le16(NVME_CTRL_ONCS_DSM |
> -			NVME_CTRL_ONCS_WRITE_ZEROES);
> -
> +			NVME_CTRL_ONCS_WRITE_ZEROES | NVME_CTRL_ONCS_COPY);
>   	/* XXX: don't report vwc if the underlying device is write through */
>   	id->vwc = NVME_CTRL_VWC_PRESENT;
>   
> @@ -536,6 +535,12 @@ static void nvmet_execute_identify_ns(struct nvmet_req *req)
>   
>   	if (req->ns->bdev)
>   		nvmet_bdev_set_limits(req->ns->bdev, id);
> +	else {
> +		id->msrc = (u8)to0based(BIO_MAX_VECS - 1);
> +		id->mssrl = cpu_to_le16(BIO_MAX_VECS <<
> +				(PAGE_SHIFT - SECTOR_SHIFT));
> +		id->mcl = cpu_to_le32(le16_to_cpu(id->mssrl));
> +	}
>   
>   	/*
>   	 * We just provide a single LBA format that matches what the
> diff --git a/drivers/nvme/target/io-cmd-bdev.c b/drivers/nvme/target/io-cmd-bdev.c
> index c2d6cea0236b..0af273097aa4 100644
> --- a/drivers/nvme/target/io-cmd-bdev.c
> +++ b/drivers/nvme/target/io-cmd-bdev.c
> @@ -46,6 +46,19 @@ void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id)
>   	id->npda = id->npdg;
>   	/* NOWS = Namespace Optimal Write Size */
>   	id->nows = to0based(bdev_io_opt(bdev) / bdev_logical_block_size(bdev));
> +
> +	/*Copy limits*/

above comment doesn't make any sense ...

> +	if (bdev_max_copy_sectors(bdev)) {
> +		id->msrc = id->msrc;
> +		id->mssrl = cpu_to_le16((bdev_max_copy_sectors(bdev) <<
> +				SECTOR_SHIFT) / bdev_logical_block_size(bdev));
> +		id->mcl = cpu_to_le32(id->mssrl);
> +	} else {
> +		id->msrc = (u8)to0based(BIO_MAX_VECS - 1);
> +		id->mssrl = cpu_to_le16((BIO_MAX_VECS << PAGE_SHIFT) /
> +				bdev_logical_block_size(bdev));
> +		id->mcl = cpu_to_le32(id->mssrl);
> +	}
>   }
>   
>   void nvmet_bdev_ns_disable(struct nvmet_ns *ns)
> @@ -184,6 +197,19 @@ static void nvmet_bio_done(struct bio *bio)
>   	nvmet_req_bio_put(req, bio);
>   }
>   
> +static void nvmet_bdev_copy_end_io(void *private, int comp_len)
> +{
> +	struct nvmet_req *req = (struct nvmet_req *)private;
> +
> +	if (comp_len == req->copy_len) {
> +		req->cqe->result.u32 = cpu_to_le32(1);
> +		nvmet_req_complete(req, errno_to_nvme_status(req, 0));
> +	} else {
> +		req->cqe->result.u32 = cpu_to_le32(0);
> +		nvmet_req_complete(req, blk_to_nvme_status(req, BLK_STS_IOERR));
> +	}
> +}
> +

please reduce calls for nvmet_req_complete().

+static void nvmet_bdev_copy_end_io(void *private, int comp_len)
+{
+	struct nvmet_req *req = (struct nvmet_req *)private;
+	u16 status;
+
+	if (comp_len == req->copy_len) {
+		req->cqe->result.u32 = cpu_to_le32(1);
+		status = errno_to_nvme_status(req, 0));
+	} else {
+		req->cqe->result.u32 = cpu_to_le32(0);
+		status = blk_to_nvme_status(req, BLK_STS_IOERR));
+	}
+	nvmet_req_complete(req, status);
+}
+

>   #ifdef CONFIG_BLK_DEV_INTEGRITY
>   static int nvmet_bdev_alloc_bip(struct nvmet_req *req, struct bio *bio,
>   				struct sg_mapping_iter *miter)
> @@ -450,6 +476,34 @@ static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req)
>   	}
>   }
>   
> +/* At present we handle only one range entry */

please add explanation why ...

> +static void nvmet_bdev_execute_copy(struct nvmet_req *req)
> +{
> +	struct nvme_copy_range range;
> +	struct nvme_command *cmnd = req->cmd;

don't use cmnd, cmd is used everywhere and matches req->cmd,
applies to everywhere in this patch...

> +	int ret;

wrong return type is should be u16 since nvmet_copy_from_sgl()
returns u16 if I remember correctly.

> +
> +

no extra white line between declaration and body of functions

> +	ret = nvmet_copy_from_sgl(req, 0, &range, sizeof(range));
> +	if (ret)
> +		goto out;
> +
> +	ret = blkdev_issue_copy(req->ns->bdev,
> +		le64_to_cpu(cmnd->copy.sdlba) << req->ns->blksize_shift,
> +		req->ns->bdev,
> +		le64_to_cpu(range.slba) << req->ns->blksize_shift,
> +		(le16_to_cpu(range.nlb) + 1) << req->ns->blksize_shift,
> +		nvmet_bdev_copy_end_io, (void *)req, GFP_KERNEL);
> +	if (ret) {
> +		req->cqe->result.u32 = cpu_to_le32(0);
> +		nvmet_req_complete(req, blk_to_nvme_status(req, BLK_STS_IOERR));
> +	}
> +
> +	return;
> +out:
> +	nvmet_req_complete(req, errno_to_nvme_status(req, ret));
> +}
> +

again one call to nvmet_req_complete() can do the same job.
consider following totally untested  :-
/* TODO: add detailed comment here why you support one range ? */
static void nvmet_bdev_execute_copy(struct nvmet_req *req)
{
         u32 blkshift = req->ns->blksize_shift;
         struct nvme_command *cmnd = req->cmd;
         struct nvme_copy_range range;
         u16 status;

         status = nvmet_copy_from_sgl(req, 0, &range, sizeof(range));
         if (status) {
                 goto out;
         }

         ret = blkdev_issue_copy(req->ns->bdev,
                                 le64_to_cpu(cmnd->copy.sdlba) << blkshift,
                                 req->ns->bdev,
                                 le64_to_cpu(range.slba) << blksize_shift,
                                 (le16_to_cpu(range.nlb) + 1) << 
blksize_shift,
                                 nvmet_bdev_copy_end_io, (void *)req, 
GFP_KERNEL);
         if (ret) {
                 req->cqe->result.u32 = cpu_to_le32(0);
                 status = blk_to_nvme_status(req, BLK_STS_IOERR);
out:
                 nvmet_req_complete(req, status);
         }
}

>   u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req)
>   {
>   	switch (req->cmd->common.opcode) {
> @@ -468,6 +522,10 @@ u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req)
>   	case nvme_cmd_write_zeroes:
>   		req->execute = nvmet_bdev_execute_write_zeroes;
>   		return 0;
> +	case nvme_cmd_copy:
> +		req->execute = nvmet_bdev_execute_copy;
> +		return 0;
> +
>   	default:
>   		return nvmet_report_invalid_opcode(req);
>   	}
> diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
> index 2d068439b129..69f198ecec77 100644
> --- a/drivers/nvme/target/io-cmd-file.c
> +++ b/drivers/nvme/target/io-cmd-file.c
> @@ -322,6 +322,49 @@ static void nvmet_file_dsm_work(struct work_struct *w)
>   	}
>   }
>   
> +static void nvmet_file_copy_work(struct work_struct *w)
> +{
> +	struct nvmet_req *req = container_of(w, struct nvmet_req, f.work);
> +	int nr_range;
> +	loff_t pos;
> +	struct nvme_command *cmnd = req->cmd;
> +	int ret = 0, len = 0, src, id;

reverse tree style for declaration ...

> +
> +	nr_range = cmnd->copy.nr_range + 1;
> +	pos = le64_to_cpu(req->cmd->copy.sdlba) << req->ns->blksize_shift;

you have a cmd variable above and you are still using req->cmd ?
why create a variable on stack then ? u don't need that variable
anyways...

> +	if (unlikely(pos + req->transfer_len > req->ns->size)) {
> +		nvmet_req_complete(req, errno_to_nvme_status(req, -ENOSPC));
> +		return;
> +	}
> +
> +	for (id = 0 ; id < nr_range; id++) {
> +		struct nvme_copy_range range;
> +
> +		ret = nvmet_copy_from_sgl(req, id * sizeof(range), &range,
> +					sizeof(range));
> +		if (ret)
> +			goto out;
> +
> +		len = (le16_to_cpu(range.nlb) + 1) << (req->ns->blksize_shift);
> +		src = (le64_to_cpu(range.slba) << (req->ns->blksize_shift));
> +		ret = vfs_copy_file_range(req->ns->file, src, req->ns->file,
> +					pos, len, 0);

5th paramaeter to vfs_copy_file_range() is size_t you have used int
for len ? also
vfs_copy_file_range() returns ssize_t you are catching it in int ?

> +out:
> +		if (ret != len) {
> +			pos += ret;
> +			req->cqe->result.u32 = cpu_to_le32(id);
> +			nvmet_req_complete(req, ret < 0 ?
> +					errno_to_nvme_status(req, ret) :
> +					errno_to_nvme_status(req, -EIO));

again plz don't add multiple nvmet_req_complete() calls

> +			return;
> +
> +		} else
> +			pos += len;
> +	}
> +
> +	nvmet_req_complete(req, 0);
> +
> +}

wrt above comments consider following totally untested :-

static void nvmet_file_copy_work(struct work_struct *w)
{
         struct nvmet_req *req = container_of(w, struct nvmet_req, f.work);
         int nr_range = req->cmd->copy.nr_range + 1;
         u16 status = 0;
         int src, id;
         ssize_t ret;
         size_t len;
         loff_t pos;

         pos = le64_to_cpu(req->cmd->copy.sdlba) << req->ns->blksize_shift;
         if (unlikely(pos + req->transfer_len > req->ns->size)) {
                 nvmet_req_complete(req, errno_to_nvme_status(req, 
-ENOSPC));
                 return;
         }

         for (id = 0 ; id < nr_range; id++) {
                 struct nvme_copy_range range;

                 status = nvmet_copy_from_sgl(req, id * sizeof(range), 
&range,
                                         sizeof(range));
                 if (status)
                         goto out;

                 src = (le64_to_cpu(range.slba) << 
(req->ns->blksize_shift));
                 len = (le16_to_cpu(range.nlb) + 1) << 
(req->ns->blksize_shift);

                 ret = vfs_copy_file_range(req->ns->file, src, 
req->ns->file,
                                         pos, len, 0);

                 if (ret != len) {
                         req->cqe->result.u32 = cpu_to_le32(id);
                         if (ret < 0)
                                 status = errno_to_nvme_status(req, ret);
                         else
                                 status = errno_to_nvme_status(req, -EIO);
                         goto out;
                 }
                 pos += ret;
         }
out:
         nvmet_req_complete(req, status);
}


>   static void nvmet_file_execute_dsm(struct nvmet_req *req)
>   {
>   	if (!nvmet_check_data_len_lte(req, nvmet_dsm_len(req)))
> @@ -330,6 +373,12 @@ static void nvmet_file_execute_dsm(struct nvmet_req *req)
>   	queue_work(nvmet_wq, &req->f.work);
>   }
>   
> +static void nvmet_file_execute_copy(struct nvmet_req *req)
> +{
> +	INIT_WORK(&req->f.work, nvmet_file_copy_work);
> +	queue_work(nvmet_wq, &req->f.work);
> +}
> +
>   static void nvmet_file_write_zeroes_work(struct work_struct *w)
>   {
>   	struct nvmet_req *req = container_of(w, struct nvmet_req, f.work);
> @@ -376,6 +425,9 @@ u16 nvmet_file_parse_io_cmd(struct nvmet_req *req)
>   	case nvme_cmd_write_zeroes:
>   		req->execute = nvmet_file_execute_write_zeroes;
>   		return 0;
> +	case nvme_cmd_copy:
> +		req->execute = nvmet_file_execute_copy;
> +		return 0;
>   	default:
>   		return nvmet_report_invalid_opcode(req);
>   	}
> diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c
> index f2d24b2d992f..d18ed8067a15 100644
> --- a/drivers/nvme/target/loop.c
> +++ b/drivers/nvme/target/loop.c
> @@ -146,6 +146,12 @@ static blk_status_t nvme_loop_queue_rq(struct blk_mq_hw_ctx *hctx,
>   		return ret;
>   
>   	nvme_start_request(req);
> +	if (unlikely((req->cmd_flags & REQ_COPY) &&
> +				(req_op(req) == REQ_OP_READ))) {
> +		blk_mq_set_request_complete(req);
> +		blk_mq_end_request(req, BLK_STS_OK);
> +		return BLK_STS_OK;
> +	}
>   	iod->cmd.common.flags |= NVME_CMD_SGL_METABUF;
>   	iod->req.port = queue->ctrl->port;
>   	if (!nvmet_req_init(&iod->req, &queue->nvme_cq,
> diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
> index 89bedfcd974c..69ed4c8469e5 100644
> --- a/drivers/nvme/target/nvmet.h
> +++ b/drivers/nvme/target/nvmet.h
> @@ -393,6 +393,7 @@ struct nvmet_req {
>   	struct device		*p2p_client;
>   	u16			error_loc;
>   	u64			error_slba;
> +	size_t			copy_len;
>   };
>   
>   #define NVMET_MAX_MPOOL_BVEC		16

-ck

Re: [PATCH v9 6/9] nvmet: add copy command support for bdev and file ns

[Nitesh Shetty]

[-- Attachment #1: Type: text/plain, Size: 12011 bytes --]

On Tue, Apr 25, 2023 at 06:36:51AM +0000, Chaitanya Kulkarni wrote:
> On 4/11/23 01:10, Anuj Gupta wrote:
> > From: Nitesh Shetty <nj.shetty@samsung.com>
> >
> > Add support for handling target command on target.
> 
> what is target command ?
> 
> command that you have added is :nvme_cmd_copy
>

acked. It was supposed to be nvme_cmd_copy.

> > For bdev-ns we call into blkdev_issue_copy, which the block layer
> > completes by a offloaded copy request to backend bdev or by emulating the
> > request.
> >
> > For file-ns we call vfs_copy_file_range to service our request.
> >
> > Currently target always shows copy capability by setting
> > NVME_CTRL_ONCS_COPY in controller ONCS.
> 
> there is nothing mentioned about target/loop.c in commit log ?
>

acked, will add the description for loop device.

> > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> > Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
> > ---
> >   drivers/nvme/target/admin-cmd.c   |  9 +++--
> >   drivers/nvme/target/io-cmd-bdev.c | 58 +++++++++++++++++++++++++++++++
> >   drivers/nvme/target/io-cmd-file.c | 52 +++++++++++++++++++++++++++
> >   drivers/nvme/target/loop.c        |  6 ++++
> >   drivers/nvme/target/nvmet.h       |  1 +
> >   5 files changed, 124 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
> > index 80099df37314..978786ec6a9e 100644
> > --- a/drivers/nvme/target/admin-cmd.c
> > +++ b/drivers/nvme/target/admin-cmd.c
> > @@ -433,8 +433,7 @@ static void nvmet_execute_identify_ctrl(struct nvmet_req *req)
> >   	id->nn = cpu_to_le32(NVMET_MAX_NAMESPACES);
> >   	id->mnan = cpu_to_le32(NVMET_MAX_NAMESPACES);
> >   	id->oncs = cpu_to_le16(NVME_CTRL_ONCS_DSM |
> > -			NVME_CTRL_ONCS_WRITE_ZEROES);
> > -
> > +			NVME_CTRL_ONCS_WRITE_ZEROES | NVME_CTRL_ONCS_COPY);
> >   	/* XXX: don't report vwc if the underlying device is write through */
> >   	id->vwc = NVME_CTRL_VWC_PRESENT;
> >   
> > @@ -536,6 +535,12 @@ static void nvmet_execute_identify_ns(struct nvmet_req *req)
> >   
> >   	if (req->ns->bdev)
> >   		nvmet_bdev_set_limits(req->ns->bdev, id);
> > +	else {
> > +		id->msrc = (u8)to0based(BIO_MAX_VECS - 1);
> > +		id->mssrl = cpu_to_le16(BIO_MAX_VECS <<
> > +				(PAGE_SHIFT - SECTOR_SHIFT));
> > +		id->mcl = cpu_to_le32(le16_to_cpu(id->mssrl));
> > +	}
> >   
> >   	/*
> >   	 * We just provide a single LBA format that matches what the
> > diff --git a/drivers/nvme/target/io-cmd-bdev.c b/drivers/nvme/target/io-cmd-bdev.c
> > index c2d6cea0236b..0af273097aa4 100644
> > --- a/drivers/nvme/target/io-cmd-bdev.c
> > +++ b/drivers/nvme/target/io-cmd-bdev.c
> > @@ -46,6 +46,19 @@ void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id)
> >   	id->npda = id->npdg;
> >   	/* NOWS = Namespace Optimal Write Size */
> >   	id->nows = to0based(bdev_io_opt(bdev) / bdev_logical_block_size(bdev));
> > +
> > +	/*Copy limits*/
> 
> above comment doesn't make any sense ...
>

acked, will remove it next version.

> > +	if (bdev_max_copy_sectors(bdev)) {
> > +		id->msrc = id->msrc;
> > +		id->mssrl = cpu_to_le16((bdev_max_copy_sectors(bdev) <<
> > +				SECTOR_SHIFT) / bdev_logical_block_size(bdev));
> > +		id->mcl = cpu_to_le32(id->mssrl);
> > +	} else {
> > +		id->msrc = (u8)to0based(BIO_MAX_VECS - 1);
> > +		id->mssrl = cpu_to_le16((BIO_MAX_VECS << PAGE_SHIFT) /
> > +				bdev_logical_block_size(bdev));
> > +		id->mcl = cpu_to_le32(id->mssrl);
> > +	}
> >   }
> >   
> >   void nvmet_bdev_ns_disable(struct nvmet_ns *ns)
> > @@ -184,6 +197,19 @@ static void nvmet_bio_done(struct bio *bio)
> >   	nvmet_req_bio_put(req, bio);
> >   }
> >   
> > +static void nvmet_bdev_copy_end_io(void *private, int comp_len)
> > +{
> > +	struct nvmet_req *req = (struct nvmet_req *)private;
> > +
> > +	if (comp_len == req->copy_len) {
> > +		req->cqe->result.u32 = cpu_to_le32(1);
> > +		nvmet_req_complete(req, errno_to_nvme_status(req, 0));
> > +	} else {
> > +		req->cqe->result.u32 = cpu_to_le32(0);
> > +		nvmet_req_complete(req, blk_to_nvme_status(req, BLK_STS_IOERR));
> > +	}
> > +}
> > +
> 
> please reduce calls for nvmet_req_complete().
> 
> +static void nvmet_bdev_copy_end_io(void *private, int comp_len)
> +{
> +	struct nvmet_req *req = (struct nvmet_req *)private;
> +	u16 status;
> +
> +	if (comp_len == req->copy_len) {
> +		req->cqe->result.u32 = cpu_to_le32(1);
> +		status = errno_to_nvme_status(req, 0));
> +	} else {
> +		req->cqe->result.u32 = cpu_to_le32(0);
> +		status = blk_to_nvme_status(req, BLK_STS_IOERR));
> +	}
> +	nvmet_req_complete(req, status);
> +}
> +
>

makes sense, will modify this snippet.

> >   #ifdef CONFIG_BLK_DEV_INTEGRITY
> >   static int nvmet_bdev_alloc_bip(struct nvmet_req *req, struct bio *bio,
> >   				struct sg_mapping_iter *miter)
> > @@ -450,6 +476,34 @@ static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req)
> >   	}
> >   }
> >   
> > +/* At present we handle only one range entry */
> 
> please add explanation why ...
>
Because we aligned copy offload similar to copy_file_range in out recent
revisions, discarding multi range support.
Sure we will update comments to reflect the same.

> > +static void nvmet_bdev_execute_copy(struct nvmet_req *req)
> > +{
> > +	struct nvme_copy_range range;
> > +	struct nvme_command *cmnd = req->cmd;
> 
> don't use cmnd, cmd is used everywhere and matches req->cmd,
> applies to everywhere in this patch...
> 

acked

> > +	int ret;
> 
> wrong return type is should be u16 since nvmet_copy_from_sgl()
> returns u16 if I remember correctly.
> 
> > +
> > +
> 

acked

> no extra white line between declaration and body of functions
>

acked

> > +	ret = nvmet_copy_from_sgl(req, 0, &range, sizeof(range));
> > +	if (ret)
> > +		goto out;
> > +
> > +	ret = blkdev_issue_copy(req->ns->bdev,
> > +		le64_to_cpu(cmnd->copy.sdlba) << req->ns->blksize_shift,
> > +		req->ns->bdev,
> > +		le64_to_cpu(range.slba) << req->ns->blksize_shift,
> > +		(le16_to_cpu(range.nlb) + 1) << req->ns->blksize_shift,
> > +		nvmet_bdev_copy_end_io, (void *)req, GFP_KERNEL);
> > +	if (ret) {
> > +		req->cqe->result.u32 = cpu_to_le32(0);
> > +		nvmet_req_complete(req, blk_to_nvme_status(req, BLK_STS_IOERR));
> > +	}
> > +
> > +	return;
> > +out:
> > +	nvmet_req_complete(req, errno_to_nvme_status(req, ret));
> > +}
> > +
> 
> again one call to nvmet_req_complete() can do the same job.
> consider following totally untested  :-
> /* TODO: add detailed comment here why you support one range ? */
> static void nvmet_bdev_execute_copy(struct nvmet_req *req)
> {
>          u32 blkshift = req->ns->blksize_shift;
>          struct nvme_command *cmnd = req->cmd;
>          struct nvme_copy_range range;
>          u16 status;
> 
>          status = nvmet_copy_from_sgl(req, 0, &range, sizeof(range));
>          if (status) {
>                  goto out;
>          }
> 
>          ret = blkdev_issue_copy(req->ns->bdev,
>                                  le64_to_cpu(cmnd->copy.sdlba) << blkshift,
>                                  req->ns->bdev,
>                                  le64_to_cpu(range.slba) << blksize_shift,
>                                  (le16_to_cpu(range.nlb) + 1) << 
> blksize_shift,
>                                  nvmet_bdev_copy_end_io, (void *)req, 
> GFP_KERNEL);
>          if (ret) {
>                  req->cqe->result.u32 = cpu_to_le32(0);
>                  status = blk_to_nvme_status(req, BLK_STS_IOERR);
> out:
>                  nvmet_req_complete(req, status);
>          }
> }
> 

acked, thanks for sharing the snippet

> >   u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req)
> >   {
> >   	switch (req->cmd->common.opcode) {
> > @@ -468,6 +522,10 @@ u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req)
> >   	case nvme_cmd_write_zeroes:
> >   		req->execute = nvmet_bdev_execute_write_zeroes;
> >   		return 0;
> > +	case nvme_cmd_copy:
> > +		req->execute = nvmet_bdev_execute_copy;
> > +		return 0;
> > +
> >   	default:
> >   		return nvmet_report_invalid_opcode(req);
> >   	}
> > diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
> > index 2d068439b129..69f198ecec77 100644
> > --- a/drivers/nvme/target/io-cmd-file.c
> > +++ b/drivers/nvme/target/io-cmd-file.c
> > @@ -322,6 +322,49 @@ static void nvmet_file_dsm_work(struct work_struct *w)
> >   	}
> >   }
> >   
> > +static void nvmet_file_copy_work(struct work_struct *w)
> > +{
> > +	struct nvmet_req *req = container_of(w, struct nvmet_req, f.work);
> > +	int nr_range;
> > +	loff_t pos;
> > +	struct nvme_command *cmnd = req->cmd;
> > +	int ret = 0, len = 0, src, id;
> 
> reverse tree style for declaration ...
> 

acked

> > +
> > +	nr_range = cmnd->copy.nr_range + 1;
> > +	pos = le64_to_cpu(req->cmd->copy.sdlba) << req->ns->blksize_shift;
> 
> you have a cmd variable above and you are still using req->cmd ?
> why create a variable on stack then ? u don't need that variable
> anyways...
>

acked

> > +	if (unlikely(pos + req->transfer_len > req->ns->size)) {
> > +		nvmet_req_complete(req, errno_to_nvme_status(req, -ENOSPC));
> > +		return;
> > +	}
> > +
> > +	for (id = 0 ; id < nr_range; id++) {
> > +		struct nvme_copy_range range;
> > +
> > +		ret = nvmet_copy_from_sgl(req, id * sizeof(range), &range,
> > +					sizeof(range));
> > +		if (ret)
> > +			goto out;
> > +
> > +		len = (le16_to_cpu(range.nlb) + 1) << (req->ns->blksize_shift);
> > +		src = (le64_to_cpu(range.slba) << (req->ns->blksize_shift));
> > +		ret = vfs_copy_file_range(req->ns->file, src, req->ns->file,
> > +					pos, len, 0);
> 
> 5th paramaeter to vfs_copy_file_range() is size_t you have used int
> for len ? also
> vfs_copy_file_range() returns ssize_t you are catching it in int ?
>

acked, will change it to ssize_t.

> > +out:
> > +		if (ret != len) {
> > +			pos += ret;
> > +			req->cqe->result.u32 = cpu_to_le32(id);
> > +			nvmet_req_complete(req, ret < 0 ?
> > +					errno_to_nvme_status(req, ret) :
> > +					errno_to_nvme_status(req, -EIO));
> 
> again plz don't add multiple nvmet_req_complete() calls
>

acked

> > +			return;
> > +
> > +		} else
> > +			pos += len;
> > +	}
> > +
> > +	nvmet_req_complete(req, 0);
> > +
> > +}
> 
> wrt above comments consider following totally untested :-
> 
> static void nvmet_file_copy_work(struct work_struct *w)
> {
>          struct nvmet_req *req = container_of(w, struct nvmet_req, f.work);
>          int nr_range = req->cmd->copy.nr_range + 1;
>          u16 status = 0;
>          int src, id;
>          ssize_t ret;
>          size_t len;
>          loff_t pos;
> 
>          pos = le64_to_cpu(req->cmd->copy.sdlba) << req->ns->blksize_shift;
>          if (unlikely(pos + req->transfer_len > req->ns->size)) {
>                  nvmet_req_complete(req, errno_to_nvme_status(req, 
> -ENOSPC));
>                  return;
>          }
> 
>          for (id = 0 ; id < nr_range; id++) {
>                  struct nvme_copy_range range;
> 
>                  status = nvmet_copy_from_sgl(req, id * sizeof(range), 
> &range,
>                                          sizeof(range));
>                  if (status)
>                          goto out;
> 
>                  src = (le64_to_cpu(range.slba) << 
> (req->ns->blksize_shift));
>                  len = (le16_to_cpu(range.nlb) + 1) << 
> (req->ns->blksize_shift);
> 
>                  ret = vfs_copy_file_range(req->ns->file, src, 
> req->ns->file,
>                                          pos, len, 0);
> 
>                  if (ret != len) {
>                          req->cqe->result.u32 = cpu_to_le32(id);
>                          if (ret < 0)
>                                  status = errno_to_nvme_status(req, ret);
>                          else
>                                  status = errno_to_nvme_status(req, -EIO);
>                          goto out;
>                  }
>                  pos += ret;
>          }
> out:
>          nvmet_req_complete(req, status);
> }
> 
>

Thanks for snippet will update this in next version.
--
Nitesh Shetty

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]