linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche@acm.org>
To: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org, linux-scsi@vger.kernel.org,
	linux-fsdevel@vger.kernel.org,
	"Martin K . Petersen" <martin.petersen@oracle.com>,
	Christoph Hellwig <hch@lst.de>,
	Niklas Cassel <Niklas.Cassel@wdc.com>,
	Avri Altman <Avri.Altman@wdc.com>, Bean Huo <huobean@gmail.com>,
	Daejun Park <daejun7.park@samsung.com>,
	Bart Van Assche <bvanassche@acm.org>,
	Douglas Gilbert <dgilbert@interlog.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH v3 11/14] scsi_debug: Rework subpage code error handling
Date: Tue, 17 Oct 2023 13:47:19 -0700	[thread overview]
Message-ID: <20231017204739.3409052-12-bvanassche@acm.org> (raw)
In-Reply-To: <20231017204739.3409052-1-bvanassche@acm.org>

Move the subpage code checks into the switch statement to make it easier
to add support for new page code / subpage code combinations.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_debug.c | 70 ++++++++++++++++++++-------------------
 1 file changed, 36 insertions(+), 34 deletions(-)

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 6b87d267c9c5..a96eb0d10346 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2386,22 +2386,22 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
 		ap = arr + offset;
 	}
 
-	if ((subpcode > 0x0) && (subpcode < 0xff) && (0x19 != pcode)) {
-		/* TODO: Control Extension page */
-		mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
-		return check_condition_result;
-	}
-
 	switch (pcode) {
 	case 0x1:	/* Read-Write error recovery page, direct access */
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
 		len = resp_err_recov_pg(ap, pcontrol, target);
 		offset += len;
 		break;
 	case 0x2:	/* Disconnect-Reconnect page, all devices */
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
 		len = resp_disconnect_pg(ap, pcontrol, target);
 		offset += len;
 		break;
 	case 0x3:       /* Format device page, direct access */
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
 		if (is_disk) {
 			len = resp_format_pg(ap, pcontrol, target);
 			offset += len;
@@ -2410,6 +2410,8 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
 		}
 		break;
 	case 0x8:	/* Caching page, direct access */
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
 		if (is_disk || is_zbc) {
 			len = resp_caching_pg(ap, pcontrol, target);
 			offset += len;
@@ -2418,14 +2420,14 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
 		}
 		break;
 	case 0xa:	/* Control Mode page, all devices */
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
 		len = resp_ctrl_m_pg(ap, pcontrol, target);
 		offset += len;
 		break;
 	case 0x19:	/* if spc==1 then sas phy, control+discover */
-		if ((subpcode > 0x2) && (subpcode < 0xff)) {
-			mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
-			return check_condition_result;
-		}
+		if (subpcode > 0x2 && subpcode < 0xff)
+			goto bad_subpcode;
 		len = 0;
 		if ((0x0 == subpcode) || (0xff == subpcode))
 			len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
@@ -2437,35 +2439,31 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
 		offset += len;
 		break;
 	case 0x1c:	/* Informational Exceptions Mode page, all devices */
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
 		len = resp_iec_m_pg(ap, pcontrol, target);
 		offset += len;
 		break;
 	case 0x3f:	/* Read all Mode pages */
-		if ((0 == subpcode) || (0xff == subpcode)) {
-			len = resp_err_recov_pg(ap, pcontrol, target);
-			len += resp_disconnect_pg(ap + len, pcontrol, target);
-			if (is_disk) {
-				len += resp_format_pg(ap + len, pcontrol,
-						      target);
-				len += resp_caching_pg(ap + len, pcontrol,
-						       target);
-			} else if (is_zbc) {
-				len += resp_caching_pg(ap + len, pcontrol,
-						       target);
-			}
-			len += resp_ctrl_m_pg(ap + len, pcontrol, target);
-			len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
-			if (0xff == subpcode) {
-				len += resp_sas_pcd_m_spg(ap + len, pcontrol,
-						  target, target_dev_id);
-				len += resp_sas_sha_m_spg(ap + len, pcontrol);
-			}
-			len += resp_iec_m_pg(ap + len, pcontrol, target);
-			offset += len;
-		} else {
-			mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
-			return check_condition_result;
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
+		len = resp_err_recov_pg(ap, pcontrol, target);
+		len += resp_disconnect_pg(ap + len, pcontrol, target);
+		if (is_disk) {
+			len += resp_format_pg(ap + len, pcontrol, target);
+			len += resp_caching_pg(ap + len, pcontrol, target);
+		} else if (is_zbc) {
+			len += resp_caching_pg(ap + len, pcontrol, target);
+		}
+		len += resp_ctrl_m_pg(ap + len, pcontrol, target);
+		len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
+		if (0xff == subpcode) {
+			len += resp_sas_pcd_m_spg(ap + len, pcontrol, target,
+						  target_dev_id);
+			len += resp_sas_sha_m_spg(ap + len, pcontrol);
 		}
+		len += resp_iec_m_pg(ap + len, pcontrol, target);
+		offset += len;
 		break;
 	default:
 		goto bad_pcode;
@@ -2479,6 +2477,10 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
 bad_pcode:
 	mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, 5);
 	return check_condition_result;
+
+bad_subpcode:
+	mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
+	return check_condition_result;
 }
 
 #define SDEBUG_MAX_MSELECT_SZ 512

  parent reply	other threads:[~2023-10-17 20:48 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-17 20:47 [PATCH v3 00/14] Pass data temperature information to SCSI disk devices Bart Van Assche
2023-10-17 20:47 ` [PATCH v3 01/14] fs: Move enum rw_hint into a new header file Bart Van Assche
2023-10-30 11:11   ` Kanchan Joshi
2023-10-30 16:10     ` Bart Van Assche
     [not found]     ` <CGME20231017204823epcas5p2798d17757d381aaf7ad4dd235f3f0da3@epcms2p1>
2023-11-01  6:39       ` Daejun Park
2023-11-01 16:45         ` (2) " Bart Van Assche
     [not found]         ` <CGME20231017204823epcas5p2798d17757d381aaf7ad4dd235f3f0da3@epcms2p3>
2023-11-02  7:31           ` Daejun Park
2023-10-17 20:47 ` [PATCH v3 02/14] block: Restore data lifetime support in struct bio and struct request Bart Van Assche
2023-10-17 20:47 ` [PATCH v3 03/14] fs: Restore write hint support Bart Van Assche
2023-10-17 20:47 ` [PATCH v3 04/14] fs/f2fs: Restore data lifetime support Bart Van Assche
2023-10-17 20:47 ` [PATCH v3 05/14] scsi: core: Query the Block Limits Extension VPD page Bart Van Assche
2023-10-17 20:47 ` [PATCH v3 06/14] scsi_proto: Add structures and constants related to I/O groups and streams Bart Van Assche
2023-10-17 20:47 ` [PATCH v3 07/14] sd: Translate data lifetime information Bart Van Assche
2023-10-17 20:47 ` [PATCH v3 08/14] scsi_debug: Reduce code duplication Bart Van Assche
2023-10-17 20:47 ` [PATCH v3 09/14] scsi_debug: Support the block limits extension VPD page Bart Van Assche
2023-10-17 20:47 ` [PATCH v3 10/14] scsi_debug: Rework page code error handling Bart Van Assche
2023-10-17 20:47 ` Bart Van Assche [this message]
2023-10-17 20:47 ` [PATCH v3 12/14] scsi_debug: Implement the IO Advice Hints Grouping mode page Bart Van Assche
2023-10-17 20:47 ` [PATCH v3 13/14] scsi_debug: Implement GET STREAM STATUS Bart Van Assche
2023-10-17 20:47 ` [PATCH v3 14/14] scsi_debug: Maintain write statistics per group number Bart Van Assche
2023-10-18 19:09 ` [PATCH v3 00/14] Pass data temperature information to SCSI disk devices Jens Axboe
2023-10-18 19:34   ` Bart Van Assche
2023-10-19  0:33     ` Damien Le Moal
2023-10-19 16:48       ` Bart Van Assche
2023-10-19 22:40         ` Damien Le Moal
2023-10-19 23:00           ` Damien Le Moal
2023-10-20 20:45   ` Bart Van Assche

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231017204739.3409052-12-bvanassche@acm.org \
    --to=bvanassche@acm.org \
    --cc=Avri.Altman@wdc.com \
    --cc=Niklas.Cassel@wdc.com \
    --cc=axboe@kernel.dk \
    --cc=daejun7.park@samsung.com \
    --cc=dgilbert@interlog.com \
    --cc=hch@lst.de \
    --cc=huobean@gmail.com \
    --cc=jejb@linux.ibm.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).