linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, linux-block@vger.kernel.org,
	linux-fsdevel@vger.kernel.org, Jens Axboe <axboe@kernel.dk>,
	Christoph Hellwig <hch@lst.de>,
	Daejun Park <daejun7.park@samsung.com>,
	Kanchan Joshi <joshi.k@samsung.com>,
	Bart Van Assche <bvanassche@acm.org>,
	Douglas Gilbert <dgilbert@interlog.com>
Subject: [PATCH v5 14/17] scsi_debug: Rework subpage code error handling
Date: Wed, 29 Nov 2023 17:33:19 -0800	[thread overview]
Message-ID: <20231130013322.175290-15-bvanassche@acm.org> (raw)
In-Reply-To: <20231130013322.175290-1-bvanassche@acm.org>

Move the subpage code checks into the switch statement to make it easier
to add support for new page code / subpage code combinations.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_debug.c | 70 ++++++++++++++++++++-------------------
 1 file changed, 36 insertions(+), 34 deletions(-)

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index a2d25177f0f3..7674bb87b198 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2690,22 +2690,22 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
 		ap = arr + offset;
 	}
 
-	if ((subpcode > 0x0) && (subpcode < 0xff) && (0x19 != pcode)) {
-		/* TODO: Control Extension page */
-		mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
-		return check_condition_result;
-	}
-
 	switch (pcode) {
 	case 0x1:	/* Read-Write error recovery page, direct access */
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
 		len = resp_err_recov_pg(ap, pcontrol, target);
 		offset += len;
 		break;
 	case 0x2:	/* Disconnect-Reconnect page, all devices */
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
 		len = resp_disconnect_pg(ap, pcontrol, target);
 		offset += len;
 		break;
 	case 0x3:       /* Format device page, direct access */
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
 		if (is_disk) {
 			len = resp_format_pg(ap, pcontrol, target);
 			offset += len;
@@ -2714,6 +2714,8 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
 		}
 		break;
 	case 0x8:	/* Caching page, direct access */
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
 		if (is_disk || is_zbc) {
 			len = resp_caching_pg(ap, pcontrol, target);
 			offset += len;
@@ -2722,14 +2724,14 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
 		}
 		break;
 	case 0xa:	/* Control Mode page, all devices */
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
 		len = resp_ctrl_m_pg(ap, pcontrol, target);
 		offset += len;
 		break;
 	case 0x19:	/* if spc==1 then sas phy, control+discover */
-		if ((subpcode > 0x2) && (subpcode < 0xff)) {
-			mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
-			return check_condition_result;
-		}
+		if (subpcode > 0x2 && subpcode < 0xff)
+			goto bad_subpcode;
 		len = 0;
 		if ((0x0 == subpcode) || (0xff == subpcode))
 			len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
@@ -2741,35 +2743,31 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
 		offset += len;
 		break;
 	case 0x1c:	/* Informational Exceptions Mode page, all devices */
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
 		len = resp_iec_m_pg(ap, pcontrol, target);
 		offset += len;
 		break;
 	case 0x3f:	/* Read all Mode pages */
-		if ((0 == subpcode) || (0xff == subpcode)) {
-			len = resp_err_recov_pg(ap, pcontrol, target);
-			len += resp_disconnect_pg(ap + len, pcontrol, target);
-			if (is_disk) {
-				len += resp_format_pg(ap + len, pcontrol,
-						      target);
-				len += resp_caching_pg(ap + len, pcontrol,
-						       target);
-			} else if (is_zbc) {
-				len += resp_caching_pg(ap + len, pcontrol,
-						       target);
-			}
-			len += resp_ctrl_m_pg(ap + len, pcontrol, target);
-			len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
-			if (0xff == subpcode) {
-				len += resp_sas_pcd_m_spg(ap + len, pcontrol,
-						  target, target_dev_id);
-				len += resp_sas_sha_m_spg(ap + len, pcontrol);
-			}
-			len += resp_iec_m_pg(ap + len, pcontrol, target);
-			offset += len;
-		} else {
-			mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
-			return check_condition_result;
+		if (subpcode > 0x0 && subpcode < 0xff)
+			goto bad_subpcode;
+		len = resp_err_recov_pg(ap, pcontrol, target);
+		len += resp_disconnect_pg(ap + len, pcontrol, target);
+		if (is_disk) {
+			len += resp_format_pg(ap + len, pcontrol, target);
+			len += resp_caching_pg(ap + len, pcontrol, target);
+		} else if (is_zbc) {
+			len += resp_caching_pg(ap + len, pcontrol, target);
+		}
+		len += resp_ctrl_m_pg(ap + len, pcontrol, target);
+		len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
+		if (0xff == subpcode) {
+			len += resp_sas_pcd_m_spg(ap + len, pcontrol, target,
+						  target_dev_id);
+			len += resp_sas_sha_m_spg(ap + len, pcontrol);
 		}
+		len += resp_iec_m_pg(ap + len, pcontrol, target);
+		offset += len;
 		break;
 	default:
 		goto bad_pcode;
@@ -2783,6 +2781,10 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
 bad_pcode:
 	mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, 5);
 	return check_condition_result;
+
+bad_subpcode:
+	mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
+	return check_condition_result;
 }
 
 #define SDEBUG_MAX_MSELECT_SZ 512

  parent reply	other threads:[~2023-11-30  1:33 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-30  1:33 [PATCH v5 00/17] Pass data lifetime information to SCSI disk devices Bart Van Assche
2023-11-30  1:33 ` [PATCH v5 01/17] fs: Fix rw_hint validation Bart Van Assche
2023-12-07 17:42   ` Christoph Hellwig
2023-11-30  1:33 ` [PATCH v5 02/17] fs: Move enum rw_hint into a new header file Bart Van Assche
2023-12-07 17:44   ` Christoph Hellwig
2023-11-30  1:33 ` [PATCH v5 03/17] fs/f2fs: Restore the whint_mode mount option Bart Van Assche
2023-12-07 17:45   ` Christoph Hellwig
2023-12-07 19:39     ` Bart Van Assche
2023-12-11 16:44       ` Christoph Hellwig
2023-11-30  1:33 ` [PATCH v5 04/17] fs: Restore F_[GS]ET_FILE_RW_HINT support Bart Van Assche
2023-12-07 17:46   ` Christoph Hellwig
2023-12-07 19:37     ` Bart Van Assche
2023-12-11 16:45       ` Christoph Hellwig
2023-11-30  1:33 ` [PATCH v5 05/17] fs: Restore kiocb.ki_hint Bart Van Assche
2023-12-07 17:46   ` Christoph Hellwig
2023-12-07 23:40     ` Bart Van Assche
2023-12-11 16:46       ` Christoph Hellwig
2023-11-30  1:33 ` [PATCH v5 06/17] block: Restore the per-bio/request data lifetime fields Bart Van Assche
2023-11-30  1:33 ` [PATCH v5 07/17] block: Propagate write hints to the block device inode Bart Van Assche
2023-11-30  1:33 ` [PATCH v5 08/17] scsi: core: Query the Block Limits Extension VPD page Bart Van Assche
2023-11-30 12:21   ` Johannes Thumshirn
2023-11-30  1:33 ` [PATCH v5 09/17] scsi_proto: Add structures and constants related to I/O groups and streams Bart Van Assche
2023-11-30 13:19   ` Johannes Thumshirn
2023-12-01  1:46     ` Bart Van Assche
2023-11-30  1:33 ` [PATCH v5 10/17] sd: Translate data lifetime information Bart Van Assche
2023-11-30  1:33 ` [PATCH v5 11/17] scsi_debug: Reduce code duplication Bart Van Assche
2023-11-30  1:33 ` [PATCH v5 12/17] scsi_debug: Support the block limits extension VPD page Bart Van Assche
2023-11-30  1:33 ` [PATCH v5 13/17] scsi_debug: Rework page code error handling Bart Van Assche
2023-11-30  1:33 ` Bart Van Assche [this message]
2023-11-30  1:33 ` [PATCH v5 15/17] scsi_debug: Implement the IO Advice Hints Grouping mode page Bart Van Assche
2023-11-30  1:33 ` [PATCH v5 16/17] scsi_debug: Implement GET STREAM STATUS Bart Van Assche
2023-11-30  1:33 ` [PATCH v5 17/17] scsi_debug: Maintain write statistics per group number Bart Van Assche

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231130013322.175290-15-bvanassche@acm.org \
    --to=bvanassche@acm.org \
    --cc=axboe@kernel.dk \
    --cc=daejun7.park@samsung.com \
    --cc=dgilbert@interlog.com \
    --cc=hch@lst.de \
    --cc=joshi.k@samsung.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).