From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, linux-block@vger.kernel.org,
linux-fsdevel@vger.kernel.org, Jens Axboe <axboe@kernel.dk>,
Christoph Hellwig <hch@lst.de>,
Daejun Park <daejun7.park@samsung.com>,
Kanchan Joshi <joshi.k@samsung.com>,
Bart Van Assche <bvanassche@acm.org>,
Douglas Gilbert <dgilbert@interlog.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH v6 16/20] scsi: scsi_debug: Rework subpage code error handling
Date: Thu, 14 Dec 2023 12:40:49 -0800 [thread overview]
Message-ID: <20231214204119.3670625-17-bvanassche@acm.org> (raw)
In-Reply-To: <20231214204119.3670625-1-bvanassche@acm.org>
Move the subpage code checks into the switch statement to make it easier
to add support for new page code / subpage code combinations.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/scsi/scsi_debug.c | 70 ++++++++++++++++++++-------------------
1 file changed, 36 insertions(+), 34 deletions(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index b646c5320c63..cadd130d6b53 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2709,22 +2709,22 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
ap = arr + offset;
}
- if ((subpcode > 0x0) && (subpcode < 0xff) && (0x19 != pcode)) {
- /* TODO: Control Extension page */
- mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
- return check_condition_result;
- }
-
switch (pcode) {
case 0x1: /* Read-Write error recovery page, direct access */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
len = resp_err_recov_pg(ap, pcontrol, target);
offset += len;
break;
case 0x2: /* Disconnect-Reconnect page, all devices */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
len = resp_disconnect_pg(ap, pcontrol, target);
offset += len;
break;
case 0x3: /* Format device page, direct access */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
if (is_disk) {
len = resp_format_pg(ap, pcontrol, target);
offset += len;
@@ -2733,6 +2733,8 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
}
break;
case 0x8: /* Caching page, direct access */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
if (is_disk || is_zbc) {
len = resp_caching_pg(ap, pcontrol, target);
offset += len;
@@ -2741,14 +2743,14 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
}
break;
case 0xa: /* Control Mode page, all devices */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
len = resp_ctrl_m_pg(ap, pcontrol, target);
offset += len;
break;
case 0x19: /* if spc==1 then sas phy, control+discover */
- if ((subpcode > 0x2) && (subpcode < 0xff)) {
- mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
- return check_condition_result;
- }
+ if (subpcode > 0x2 && subpcode < 0xff)
+ goto bad_subpcode;
len = 0;
if ((0x0 == subpcode) || (0xff == subpcode))
len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
@@ -2760,35 +2762,31 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
offset += len;
break;
case 0x1c: /* Informational Exceptions Mode page, all devices */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
len = resp_iec_m_pg(ap, pcontrol, target);
offset += len;
break;
case 0x3f: /* Read all Mode pages */
- if ((0 == subpcode) || (0xff == subpcode)) {
- len = resp_err_recov_pg(ap, pcontrol, target);
- len += resp_disconnect_pg(ap + len, pcontrol, target);
- if (is_disk) {
- len += resp_format_pg(ap + len, pcontrol,
- target);
- len += resp_caching_pg(ap + len, pcontrol,
- target);
- } else if (is_zbc) {
- len += resp_caching_pg(ap + len, pcontrol,
- target);
- }
- len += resp_ctrl_m_pg(ap + len, pcontrol, target);
- len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
- if (0xff == subpcode) {
- len += resp_sas_pcd_m_spg(ap + len, pcontrol,
- target, target_dev_id);
- len += resp_sas_sha_m_spg(ap + len, pcontrol);
- }
- len += resp_iec_m_pg(ap + len, pcontrol, target);
- offset += len;
- } else {
- mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
- return check_condition_result;
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
+ len = resp_err_recov_pg(ap, pcontrol, target);
+ len += resp_disconnect_pg(ap + len, pcontrol, target);
+ if (is_disk) {
+ len += resp_format_pg(ap + len, pcontrol, target);
+ len += resp_caching_pg(ap + len, pcontrol, target);
+ } else if (is_zbc) {
+ len += resp_caching_pg(ap + len, pcontrol, target);
+ }
+ len += resp_ctrl_m_pg(ap + len, pcontrol, target);
+ len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
+ if (0xff == subpcode) {
+ len += resp_sas_pcd_m_spg(ap + len, pcontrol, target,
+ target_dev_id);
+ len += resp_sas_sha_m_spg(ap + len, pcontrol);
}
+ len += resp_iec_m_pg(ap + len, pcontrol, target);
+ offset += len;
break;
default:
goto bad_pcode;
@@ -2802,6 +2800,10 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
bad_pcode:
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, 5);
return check_condition_result;
+
+bad_subpcode:
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
+ return check_condition_result;
}
#define SDEBUG_MAX_MSELECT_SZ 512
next prev parent reply other threads:[~2023-12-14 20:42 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-14 20:40 [PATCH v6 00/20] Pass data lifetime information to SCSI disk devices Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 01/20] fs: Fix rw_hint validation Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 02/20] fs: Verify write lifetime constants at compile time Bart Van Assche
2023-12-15 7:21 ` Christoph Hellwig
2023-12-15 14:13 ` Johannes Thumshirn
2023-12-14 20:40 ` [PATCH v6 03/20] fs: Split fcntl_rw_hint() Bart Van Assche
2023-12-15 7:21 ` Christoph Hellwig
2023-12-14 20:40 ` [PATCH v6 04/20] fs: Move enum rw_hint into a new header file Bart Van Assche
2023-12-15 7:22 ` Christoph Hellwig
2023-12-14 20:40 ` [PATCH v6 05/20] fs: Restore F_[GS]ET_FILE_RW_HINT support Bart Van Assche
2023-12-15 7:22 ` Christoph Hellwig
2023-12-15 10:19 ` Christian Brauner
2023-12-14 20:40 ` [PATCH v6 06/20] block, fs: Restore the per-bio/request data lifetime fields Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 07/20] block, fs: Propagate write hints to the block device inode Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 08/20] fs/f2fs: Restore the whint_mode mount option Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 09/20] fs/f2fs: Restore support for tracing data lifetimes Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 10/20] scsi: core: Query the Block Limits Extension VPD page Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 11/20] scsi: scsi_proto: Add structures and constants related to I/O groups and streams Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 12/20] scsi: sd: Translate data lifetime information Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 13/20] scsi: scsi_debug: Reduce code duplication Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 14/20] scsi: scsi_debug: Support the block limits extension VPD page Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 15/20] scsi: scsi_debug: Rework page code error handling Bart Van Assche
2023-12-14 20:40 ` Bart Van Assche [this message]
2023-12-14 20:40 ` [PATCH v6 17/20] scsi: scsi_debug: Allocate the MODE SENSE response from the heap Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 18/20] scsi: scsi_debug: Implement the IO Advice Hints Grouping mode page Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 19/20] scsi: scsi_debug: Implement GET STREAM STATUS Bart Van Assche
2023-12-14 20:40 ` [PATCH v6 20/20] scsi: scsi_debug: Maintain write statistics per group number Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231214204119.3670625-17-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=axboe@kernel.dk \
--cc=daejun7.park@samsung.com \
--cc=dgilbert@interlog.com \
--cc=hch@lst.de \
--cc=jejb@linux.ibm.com \
--cc=joshi.k@samsung.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).