From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, linux-block@vger.kernel.org,
linux-fsdevel@vger.kernel.org, Jens Axboe <axboe@kernel.dk>,
Christoph Hellwig <hch@lst.de>,
Daejun Park <daejun7.park@samsung.com>,
Kanchan Joshi <joshi.k@samsung.com>,
Bart Van Assche <bvanassche@acm.org>,
Douglas Gilbert <dgilbert@interlog.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH v9 15/19] scsi: scsi_debug: Rework subpage code error handling
Date: Tue, 30 Jan 2024 13:48:41 -0800 [thread overview]
Message-ID: <20240130214911.1863909-16-bvanassche@acm.org> (raw)
In-Reply-To: <20240130214911.1863909-1-bvanassche@acm.org>
Move the subpage code checks into the switch statement to make it easier
to add support for new page code / subpage code combinations.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/scsi/scsi_debug.c | 70 ++++++++++++++++++++-------------------
1 file changed, 36 insertions(+), 34 deletions(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index ba0a29e6a86d..67a8e6243e5e 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2703,22 +2703,22 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
ap = arr + offset;
}
- if ((subpcode > 0x0) && (subpcode < 0xff) && (0x19 != pcode)) {
- /* TODO: Control Extension page */
- mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
- return check_condition_result;
- }
-
switch (pcode) {
case 0x1: /* Read-Write error recovery page, direct access */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
len = resp_err_recov_pg(ap, pcontrol, target);
offset += len;
break;
case 0x2: /* Disconnect-Reconnect page, all devices */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
len = resp_disconnect_pg(ap, pcontrol, target);
offset += len;
break;
case 0x3: /* Format device page, direct access */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
if (is_disk) {
len = resp_format_pg(ap, pcontrol, target);
offset += len;
@@ -2727,6 +2727,8 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
}
break;
case 0x8: /* Caching page, direct access */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
if (is_disk || is_zbc) {
len = resp_caching_pg(ap, pcontrol, target);
offset += len;
@@ -2735,14 +2737,14 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
}
break;
case 0xa: /* Control Mode page, all devices */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
len = resp_ctrl_m_pg(ap, pcontrol, target);
offset += len;
break;
case 0x19: /* if spc==1 then sas phy, control+discover */
- if ((subpcode > 0x2) && (subpcode < 0xff)) {
- mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
- return check_condition_result;
- }
+ if (subpcode > 0x2 && subpcode < 0xff)
+ goto bad_subpcode;
len = 0;
if ((0x0 == subpcode) || (0xff == subpcode))
len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
@@ -2754,35 +2756,31 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
offset += len;
break;
case 0x1c: /* Informational Exceptions Mode page, all devices */
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
len = resp_iec_m_pg(ap, pcontrol, target);
offset += len;
break;
case 0x3f: /* Read all Mode pages */
- if ((0 == subpcode) || (0xff == subpcode)) {
- len = resp_err_recov_pg(ap, pcontrol, target);
- len += resp_disconnect_pg(ap + len, pcontrol, target);
- if (is_disk) {
- len += resp_format_pg(ap + len, pcontrol,
- target);
- len += resp_caching_pg(ap + len, pcontrol,
- target);
- } else if (is_zbc) {
- len += resp_caching_pg(ap + len, pcontrol,
- target);
- }
- len += resp_ctrl_m_pg(ap + len, pcontrol, target);
- len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
- if (0xff == subpcode) {
- len += resp_sas_pcd_m_spg(ap + len, pcontrol,
- target, target_dev_id);
- len += resp_sas_sha_m_spg(ap + len, pcontrol);
- }
- len += resp_iec_m_pg(ap + len, pcontrol, target);
- offset += len;
- } else {
- mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
- return check_condition_result;
+ if (subpcode > 0x0 && subpcode < 0xff)
+ goto bad_subpcode;
+ len = resp_err_recov_pg(ap, pcontrol, target);
+ len += resp_disconnect_pg(ap + len, pcontrol, target);
+ if (is_disk) {
+ len += resp_format_pg(ap + len, pcontrol, target);
+ len += resp_caching_pg(ap + len, pcontrol, target);
+ } else if (is_zbc) {
+ len += resp_caching_pg(ap + len, pcontrol, target);
+ }
+ len += resp_ctrl_m_pg(ap + len, pcontrol, target);
+ len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
+ if (0xff == subpcode) {
+ len += resp_sas_pcd_m_spg(ap + len, pcontrol, target,
+ target_dev_id);
+ len += resp_sas_sha_m_spg(ap + len, pcontrol);
}
+ len += resp_iec_m_pg(ap + len, pcontrol, target);
+ offset += len;
break;
default:
goto bad_pcode;
@@ -2796,6 +2794,10 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
bad_pcode:
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, 5);
return check_condition_result;
+
+bad_subpcode:
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
+ return check_condition_result;
}
#define SDEBUG_MAX_MSELECT_SZ 512
next prev parent reply other threads:[~2024-01-30 21:50 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-30 21:48 [PATCH v9 00/19] Pass data lifetime information to SCSI disk devices Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 01/19] fs: Fix rw_hint validation Bart Van Assche
2024-01-31 13:56 ` Christian Brauner
2024-01-31 21:07 ` Bart Van Assche
2024-02-22 2:46 ` Bart Van Assche
2024-02-22 8:51 ` Christian Brauner
2024-01-31 14:51 ` Kanchan Joshi
2024-01-30 21:48 ` [PATCH v9 02/19] fs: Verify write lifetime constants at compile time Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 03/19] fs: Split fcntl_rw_hint() Bart Van Assche
2024-01-31 14:52 ` Kanchan Joshi
2024-01-30 21:48 ` [PATCH v9 04/19] fs: Move enum rw_hint into a new header file Bart Van Assche
2024-01-31 7:48 ` Chao Yu
2024-01-30 21:48 ` [PATCH v9 05/19] fs: Propagate write hints to the struct block_device inode Bart Van Assche
2024-01-31 14:55 ` Kanchan Joshi
2024-01-30 21:48 ` [PATCH v9 06/19] block, fs: Restore the per-bio/request data lifetime fields Bart Van Assche
2024-01-31 14:55 ` Kanchan Joshi
2024-01-30 21:48 ` [PATCH v9 07/19] fs/f2fs: Restore the whint_mode mount option Bart Van Assche
2024-02-01 10:27 ` Chao Yu
2024-01-30 21:48 ` [PATCH v9 08/19] fs/f2fs: Restore support for tracing data lifetimes Bart Van Assche
2024-02-01 10:27 ` Chao Yu
2024-01-30 21:48 ` [PATCH v9 09/19] scsi: core: Query the Block Limits Extension VPD page Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 10/19] scsi: scsi_proto: Add structures and constants related to I/O groups and streams Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 11/19] scsi: sd: Translate data lifetime information Bart Van Assche
2024-02-15 21:33 ` Martin K. Petersen
2024-02-15 21:51 ` Bart Van Assche
2024-02-15 22:00 ` Martin K. Petersen
2024-02-16 0:22 ` Bart Van Assche
2024-02-16 0:32 ` Martin K. Petersen
2024-06-11 20:57 ` Andy Shevchenko
2024-06-11 21:21 ` Christian Heusel
2024-06-11 23:08 ` Bart Van Assche
2024-06-12 1:48 ` Martin K. Petersen
2024-06-12 5:35 ` Andy Shevchenko
2024-06-12 5:42 ` Andy Shevchenko
2024-01-30 21:48 ` [PATCH v9 12/19] scsi: scsi_debug: Reduce code duplication Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 13/19] scsi: scsi_debug: Support the block limits extension VPD page Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 14/19] scsi: scsi_debug: Rework page code error handling Bart Van Assche
2024-01-30 21:48 ` Bart Van Assche [this message]
2024-01-30 21:48 ` [PATCH v9 16/19] scsi: scsi_debug: Allocate the MODE SENSE response from the heap Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 17/19] scsi: scsi_debug: Implement the IO Advice Hints Grouping mode page Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 18/19] scsi: scsi_debug: Implement GET STREAM STATUS Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 19/19] scsi: scsi_debug: Maintain write statistics per group number Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240130214911.1863909-16-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=axboe@kernel.dk \
--cc=daejun7.park@samsung.com \
--cc=dgilbert@interlog.com \
--cc=hch@lst.de \
--cc=jejb@linux.ibm.com \
--cc=joshi.k@samsung.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).