From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, linux-block@vger.kernel.org,
linux-fsdevel@vger.kernel.org, Jens Axboe <axboe@kernel.dk>,
Christoph Hellwig <hch@lst.de>,
Daejun Park <daejun7.park@samsung.com>,
Kanchan Joshi <joshi.k@samsung.com>,
Bart Van Assche <bvanassche@acm.org>,
Douglas Gilbert <dgilbert@interlog.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH v9 17/19] scsi: scsi_debug: Implement the IO Advice Hints Grouping mode page
Date: Tue, 30 Jan 2024 13:48:43 -0800 [thread overview]
Message-ID: <20240130214911.1863909-18-bvanassche@acm.org> (raw)
In-Reply-To: <20240130214911.1863909-1-bvanassche@acm.org>
Implement an IO Advice Hints Grouping mode page with three permanent
streams. A permanent stream is a stream for which the device server does
not allow closing or otherwise modifying the configuration of that
stream. The stream identifier enable (ST_ENBLE) bit specifies whether
the stream identifier may be used in the GROUP NUMBER field of SCSI
WRITE commands.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/scsi/scsi_debug.c | 61 +++++++++++++++++++++++++++++++++++++--
1 file changed, 58 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index b544498324f6..ccf59b3e7602 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -1969,7 +1969,11 @@ static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
arr[4] = 0x5; /* SPT: GRD_CHK:1, REF_CHK:1 */
else
arr[4] = 0x0; /* no protection stuff */
- arr[5] = 0x7; /* head of q, ordered + simple q's */
+ /*
+ * GROUP_SUP=1; HEADSUP=1 (HEAD OF QUEUE); ORDSUP=1
+ * (ORDERED queuing); SIMPSUP=1 (SIMPLE queuing).
+ */
+ arr[5] = 0x17;
} else if (0x87 == cmd[2]) { /* mode page policy */
arr[3] = 0x8; /* number of following entries */
arr[4] = 0x2; /* disconnect-reconnect mp */
@@ -2559,6 +2563,40 @@ static int resp_ctrl_m_pg(unsigned char *p, int pcontrol, int target)
return sizeof(ctrl_m_pg);
}
+/* IO Advice Hints Grouping mode page */
+static int resp_grouping_m_pg(unsigned char *p, int pcontrol, int target)
+{
+ /* IO Advice Hints Grouping mode page */
+ struct grouping_m_pg {
+ u8 page_code; /* OR 0x40 when subpage_code > 0 */
+ u8 subpage_code;
+ __be16 page_length;
+ u8 reserved[12];
+ struct scsi_io_group_descriptor descr[MAXIMUM_NUMBER_OF_STREAMS];
+ };
+ static const struct grouping_m_pg gr_m_pg = {
+ .page_code = 0xa | 0x40,
+ .subpage_code = 5,
+ .page_length = cpu_to_be16(sizeof(gr_m_pg) - 4),
+ .descr = {
+ { .st_enble = 1 },
+ { .st_enble = 1 },
+ { .st_enble = 1 },
+ { .st_enble = 1 },
+ { .st_enble = 1 },
+ { .st_enble = 0 },
+ }
+ };
+
+ BUILD_BUG_ON(sizeof(struct grouping_m_pg) !=
+ 16 + MAXIMUM_NUMBER_OF_STREAMS * 16);
+ memcpy(p, &gr_m_pg, sizeof(gr_m_pg));
+ if (1 == pcontrol) {
+ /* There are no changeable values so clear from byte 4 on. */
+ memset(p + 4, 0, sizeof(gr_m_pg) - 4);
+ }
+ return sizeof(gr_m_pg);
+}
static int resp_iec_m_pg(unsigned char *p, int pcontrol, int target)
{ /* Informational Exceptions control mode page for mode_sense */
@@ -2708,6 +2746,10 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
ap = arr + offset;
}
+ /*
+ * N.B. If len>0 before resp_*_pg() call, then form of that call should be:
+ * len += resp_*_pg(ap + len, pcontrol, target);
+ */
switch (pcode) {
case 0x1: /* Read-Write error recovery page, direct access */
if (subpcode > 0x0 && subpcode < 0xff)
@@ -2742,9 +2784,20 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
}
break;
case 0xa: /* Control Mode page, all devices */
- if (subpcode > 0x0 && subpcode < 0xff)
+ switch (subpcode) {
+ case 0:
+ len = resp_ctrl_m_pg(ap, pcontrol, target);
+ break;
+ case 0x05:
+ len = resp_grouping_m_pg(ap, pcontrol, target);
+ break;
+ case 0xff:
+ len = resp_ctrl_m_pg(ap, pcontrol, target);
+ len += resp_grouping_m_pg(ap + len, pcontrol, target);
+ break;
+ default:
goto bad_subpcode;
- len = resp_ctrl_m_pg(ap, pcontrol, target);
+ }
offset += len;
break;
case 0x19: /* if spc==1 then sas phy, control+discover */
@@ -2778,6 +2831,8 @@ static int resp_mode_sense(struct scsi_cmnd *scp,
len += resp_caching_pg(ap + len, pcontrol, target);
}
len += resp_ctrl_m_pg(ap + len, pcontrol, target);
+ if (0xff == subpcode)
+ len += resp_grouping_m_pg(ap + len, pcontrol, target);
len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
if (0xff == subpcode) {
len += resp_sas_pcd_m_spg(ap + len, pcontrol, target,
next prev parent reply other threads:[~2024-01-30 21:50 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-30 21:48 [PATCH v9 00/19] Pass data lifetime information to SCSI disk devices Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 01/19] fs: Fix rw_hint validation Bart Van Assche
2024-01-31 13:56 ` Christian Brauner
2024-01-31 21:07 ` Bart Van Assche
2024-02-22 2:46 ` Bart Van Assche
2024-02-22 8:51 ` Christian Brauner
2024-01-31 14:51 ` Kanchan Joshi
2024-01-30 21:48 ` [PATCH v9 02/19] fs: Verify write lifetime constants at compile time Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 03/19] fs: Split fcntl_rw_hint() Bart Van Assche
2024-01-31 14:52 ` Kanchan Joshi
2024-01-30 21:48 ` [PATCH v9 04/19] fs: Move enum rw_hint into a new header file Bart Van Assche
2024-01-31 7:48 ` Chao Yu
2024-01-30 21:48 ` [PATCH v9 05/19] fs: Propagate write hints to the struct block_device inode Bart Van Assche
2024-01-31 14:55 ` Kanchan Joshi
2024-01-30 21:48 ` [PATCH v9 06/19] block, fs: Restore the per-bio/request data lifetime fields Bart Van Assche
2024-01-31 14:55 ` Kanchan Joshi
2024-01-30 21:48 ` [PATCH v9 07/19] fs/f2fs: Restore the whint_mode mount option Bart Van Assche
2024-02-01 10:27 ` Chao Yu
2024-01-30 21:48 ` [PATCH v9 08/19] fs/f2fs: Restore support for tracing data lifetimes Bart Van Assche
2024-02-01 10:27 ` Chao Yu
2024-01-30 21:48 ` [PATCH v9 09/19] scsi: core: Query the Block Limits Extension VPD page Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 10/19] scsi: scsi_proto: Add structures and constants related to I/O groups and streams Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 11/19] scsi: sd: Translate data lifetime information Bart Van Assche
2024-02-15 21:33 ` Martin K. Petersen
2024-02-15 21:51 ` Bart Van Assche
2024-02-15 22:00 ` Martin K. Petersen
2024-02-16 0:22 ` Bart Van Assche
2024-02-16 0:32 ` Martin K. Petersen
2024-06-11 20:57 ` Andy Shevchenko
2024-06-11 21:21 ` Christian Heusel
2024-06-11 23:08 ` Bart Van Assche
2024-06-12 1:48 ` Martin K. Petersen
2024-06-12 5:35 ` Andy Shevchenko
2024-06-12 5:42 ` Andy Shevchenko
2024-01-30 21:48 ` [PATCH v9 12/19] scsi: scsi_debug: Reduce code duplication Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 13/19] scsi: scsi_debug: Support the block limits extension VPD page Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 14/19] scsi: scsi_debug: Rework page code error handling Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 15/19] scsi: scsi_debug: Rework subpage " Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 16/19] scsi: scsi_debug: Allocate the MODE SENSE response from the heap Bart Van Assche
2024-01-30 21:48 ` Bart Van Assche [this message]
2024-01-30 21:48 ` [PATCH v9 18/19] scsi: scsi_debug: Implement GET STREAM STATUS Bart Van Assche
2024-01-30 21:48 ` [PATCH v9 19/19] scsi: scsi_debug: Maintain write statistics per group number Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240130214911.1863909-18-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=axboe@kernel.dk \
--cc=daejun7.park@samsung.com \
--cc=dgilbert@interlog.com \
--cc=hch@lst.de \
--cc=jejb@linux.ibm.com \
--cc=joshi.k@samsung.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).