From: Joanne Koong <joannelkoong@gmail.com>
To: miklos@szeredi.hu, linux-fsdevel@vger.kernel.org
Cc: osandov@osandov.com, josef@toxicpanda.com,
laoji.jx@alibaba-inc.com, kernel-team@meta.com
Subject: [PATCH] fuse: Enable dynamic configuration of FUSE_MAX_MAX_PAGES
Date: Thu, 27 Jun 2024 17:13:55 -0700 [thread overview]
Message-ID: <20240628001355.243805-1-joannelkoong@gmail.com> (raw)
Introduce the capability to dynamically configure the FUSE_MAX_MAX_PAGES
limit through a sysctl. This enhancement allows system administrators to
adjust the value based on system-specific requirements.
This removes the previous static limit of 256 max pages, which limits
the max write size of a request to 1 MiB (on 4096 pagesize systems).
Having the ability to up the max write size beyond 1 MiB allows for the
perf improvements detailed in this thread [1].
$ sysctl -a | grep fuse_max_max_pages
fs.fuse.fuse_max_max_pages = 256
$ sysctl -n fs.fuse.fuse_max_max_pages
256
$ echo 1024 | sudo tee /proc/sys/fs/fuse/fuse_max_max_pages
1024
$ sysctl -n fs.fuse.fuse_max_max_pages
1024
[1] https://lore.kernel.org/linux-fsdevel/20240124070512.52207-1-jefflexu@linux.alibaba.com/T/#u
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
---
Documentation/admin-guide/sysctl/fs.rst | 10 +++++++
fs/fuse/Makefile | 2 +-
fs/fuse/fuse_i.h | 14 +++++++---
fs/fuse/inode.c | 11 +++++++-
fs/fuse/ioctl.c | 4 ++-
fs/fuse/sysctl.c | 35 +++++++++++++++++++++++++
6 files changed, 70 insertions(+), 6 deletions(-)
create mode 100644 fs/fuse/sysctl.c
diff --git a/Documentation/admin-guide/sysctl/fs.rst b/Documentation/admin-guide/sysctl/fs.rst
index 47499a1742bd..3f96e2f47b01 100644
--- a/Documentation/admin-guide/sysctl/fs.rst
+++ b/Documentation/admin-guide/sysctl/fs.rst
@@ -332,3 +332,13 @@ Each "watch" costs roughly 90 bytes on a 32-bit kernel, and roughly 160 bytes
on a 64-bit one.
The current default value for ``max_user_watches`` is 4% of the
available low memory, divided by the "watch" cost in bytes.
+
+5. /proc/sys/fs/fuse - Configuration options for FUSE filesystems
+=====================================================================
+
+This directory contains the following configuration options for FUSE
+filesystems:
+
+``/proc/sys/fs/fuse/fuse_max_max_pages`` is a read/write file for
+setting/getting the maximum number of pages that can be used for servicing
+requests in FUSE.
diff --git a/fs/fuse/Makefile b/fs/fuse/Makefile
index 6e0228c6d0cb..cd4ef3e08ebf 100644
--- a/fs/fuse/Makefile
+++ b/fs/fuse/Makefile
@@ -7,7 +7,7 @@ obj-$(CONFIG_FUSE_FS) += fuse.o
obj-$(CONFIG_CUSE) += cuse.o
obj-$(CONFIG_VIRTIO_FS) += virtiofs.o
-fuse-y := dev.o dir.o file.o inode.o control.o xattr.o acl.o readdir.o ioctl.o
+fuse-y := dev.o dir.o file.o inode.o control.o xattr.o acl.o readdir.o ioctl.o sysctl.o
fuse-y += iomode.o
fuse-$(CONFIG_FUSE_DAX) += dax.o
fuse-$(CONFIG_FUSE_PASSTHROUGH) += passthrough.o
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index f23919610313..0c9aaf626341 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -35,9 +35,6 @@
/** Default max number of pages that can be used in a single read request */
#define FUSE_DEFAULT_MAX_PAGES_PER_REQ 32
-/** Maximum of max_pages received in init_out */
-#define FUSE_MAX_MAX_PAGES 256
-
/** Bias for fi->writectr, meaning new writepages must not be sent */
#define FUSE_NOWRITE INT_MIN
@@ -47,6 +44,9 @@
/** Number of dentries for each connection in the control filesystem */
#define FUSE_CTL_NUM_DENTRIES 5
+/** Maximum of max_pages received in init_out */
+extern unsigned int fuse_max_max_pages;
+
/** List of active connections */
extern struct list_head fuse_conn_list;
@@ -1472,4 +1472,12 @@ ssize_t fuse_passthrough_splice_write(struct pipe_inode_info *pipe,
size_t len, unsigned int flags);
ssize_t fuse_passthrough_mmap(struct file *file, struct vm_area_struct *vma);
+#ifdef CONFIG_SYSCTL
+extern int fuse_sysctl_register(void);
+extern void fuse_sysctl_unregister(void);
+#else
+#define fuse_sysctl_register() (0)
+#define fuse_sysctl_unregister() do { } while (0)
+#endif /* CONFIG_SYSCTL */
+
#endif /* _FS_FUSE_I_H */
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 99e44ea7d875..5d29a92389e6 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -35,6 +35,8 @@ DEFINE_MUTEX(fuse_mutex);
static int set_global_limit(const char *val, const struct kernel_param *kp);
+unsigned int fuse_max_max_pages = 256;
+
unsigned max_user_bgreq;
module_param_call(max_user_bgreq, set_global_limit, param_get_uint,
&max_user_bgreq, 0644);
@@ -932,7 +934,7 @@ void fuse_conn_init(struct fuse_conn *fc, struct fuse_mount *fm,
fc->pid_ns = get_pid_ns(task_active_pid_ns(current));
fc->user_ns = get_user_ns(user_ns);
fc->max_pages = FUSE_DEFAULT_MAX_PAGES_PER_REQ;
- fc->max_pages_limit = FUSE_MAX_MAX_PAGES;
+ fc->max_pages_limit = fuse_max_max_pages;
if (IS_ENABLED(CONFIG_FUSE_PASSTHROUGH))
fuse_backing_files_init(fc);
@@ -2039,8 +2041,14 @@ static int __init fuse_fs_init(void)
if (err)
goto out3;
+ err = fuse_sysctl_register();
+ if (err)
+ goto out4;
+
return 0;
+ out4:
+ unregister_filesystem(&fuse_fs_type);
out3:
unregister_fuseblk();
out2:
@@ -2053,6 +2061,7 @@ static void fuse_fs_cleanup(void)
{
unregister_filesystem(&fuse_fs_type);
unregister_fuseblk();
+ fuse_sysctl_unregister();
/*
* Make sure all delayed rcu free inodes are flushed before we
diff --git a/fs/fuse/ioctl.c b/fs/fuse/ioctl.c
index 572ce8a82ceb..a6c8ee551635 100644
--- a/fs/fuse/ioctl.c
+++ b/fs/fuse/ioctl.c
@@ -10,6 +10,8 @@
#include <linux/fileattr.h>
#include <linux/fsverity.h>
+#define FUSE_VERITY_ENABLE_ARG_MAX_PAGES 256
+
static ssize_t fuse_send_ioctl(struct fuse_mount *fm, struct fuse_args *args,
struct fuse_ioctl_out *outarg)
{
@@ -140,7 +142,7 @@ static int fuse_setup_enable_verity(unsigned long arg, struct iovec *iov,
{
struct fsverity_enable_arg enable;
struct fsverity_enable_arg __user *uarg = (void __user *)arg;
- const __u32 max_buffer_len = FUSE_MAX_MAX_PAGES * PAGE_SIZE;
+ const __u32 max_buffer_len = FUSE_VERITY_ENABLE_ARG_MAX_PAGES * PAGE_SIZE;
if (copy_from_user(&enable, uarg, sizeof(enable)))
return -EFAULT;
diff --git a/fs/fuse/sysctl.c b/fs/fuse/sysctl.c
new file mode 100644
index 000000000000..0dbcb9688f73
--- /dev/null
+++ b/fs/fuse/sysctl.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/fs/fuse/fuse_sysctl.c
+ *
+ * Sysctl interface to fuse parameters
+ */
+#include <linux/sysctl.h>
+
+#include "fuse_i.h"
+
+static struct ctl_table_header *fuse_table_header;
+
+static struct ctl_table fuse_sysctl_table[] = {
+ {
+ .procname = "fuse_max_max_pages",
+ .data = &fuse_max_max_pages,
+ .maxlen = sizeof(fuse_max_max_pages),
+ .mode = 0644,
+ .proc_handler = proc_douintvec,
+ },
+};
+
+int fuse_sysctl_register(void)
+{
+ fuse_table_header = register_sysctl("fs/fuse", fuse_sysctl_table);
+ if (!fuse_table_header)
+ return -ENOMEM;
+ return 0;
+}
+
+void fuse_sysctl_unregister(void)
+{
+ unregister_sysctl_table(fuse_table_header);
+ fuse_table_header = NULL;
+}
--
2.43.0
next reply other threads:[~2024-06-28 0:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-28 0:13 Joanne Koong [this message]
2024-06-28 18:03 ` [PATCH] fuse: Enable dynamic configuration of FUSE_MAX_MAX_PAGES Josef Bacik
2024-07-01 16:48 ` Joanne Koong
2024-07-01 19:15 ` Sweet Tea Dorminy
2024-07-01 23:28 ` Joanne Koong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240628001355.243805-1-joannelkoong@gmail.com \
--to=joannelkoong@gmail.com \
--cc=josef@toxicpanda.com \
--cc=kernel-team@meta.com \
--cc=laoji.jx@alibaba-inc.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=miklos@szeredi.hu \
--cc=osandov@osandov.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).