From: Zhang Yi <yi.zhang@huaweicloud.com>
To: linux-ext4@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
tytso@mit.edu, adilger.kernel@dilger.ca, jack@suse.cz,
ritesh.list@gmail.com, yi.zhang@huawei.com,
yi.zhang@huaweicloud.com, chengzhihao1@huawei.com,
yukuai3@huawei.com
Subject: [PATCH v3 02/12] ext4: optimize the EXT4_GET_BLOCKS_DELALLOC_RESERVE flag set
Date: Tue, 13 Aug 2024 20:34:42 +0800 [thread overview]
Message-ID: <20240813123452.2824659-3-yi.zhang@huaweicloud.com> (raw)
In-Reply-To: <20240813123452.2824659-1-yi.zhang@huaweicloud.com>
From: Zhang Yi <yi.zhang@huawei.com>
When doing block allocation, magic EXT4_GET_BLOCKS_DELALLOC_RESERVE
means the allocating range covers a range of delayed allocated clusters,
the blocks and quotas have already been reserved in ext4_da_map_blocks(),
we should update the reserved space and don't need to claim them again.
At the moment, we only set this magic in mpage_map_one_extent() when
allocating a range of delayed allocated clusters in the write back path,
it makes things complicated since we have to notice and deal with the
case of allocating non-delayed allocated clusters separately in
ext4_ext_map_blocks(). For example, it we fallocate some blocks that
have been delayed allocated, free space would be claimed again in
ext4_mb_new_blocks() (this is wrong exactily), and we can't claim quota
space again, we have to release the quota reservations made for that
previously delayed allocated clusters.
Move the position thats set the EXT4_GET_BLOCKS_DELALLOC_RESERVE to
where we actually do block allocation, it could simplify above handling
a lot, it means that we always set this magic once the allocation range
covers delalloc blocks, no need to take care of the allocation path.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
---
fs/ext4/inode.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 112aec171ee9..91b2610a6dc5 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -489,6 +489,14 @@ static int ext4_map_create_blocks(handle_t *handle, struct inode *inode,
unsigned int status;
int err, retval = 0;
+ /*
+ * We pass in the magic EXT4_GET_BLOCKS_DELALLOC_RESERVE
+ * indicates that the blocks and quotas has already been
+ * checked when the data was copied into the page cache.
+ */
+ if (map->m_flags & EXT4_MAP_DELAYED)
+ flags |= EXT4_GET_BLOCKS_DELALLOC_RESERVE;
+
/*
* Here we clear m_flags because after allocating an new extent,
* it will be set again.
@@ -2224,11 +2232,6 @@ static int mpage_map_one_extent(handle_t *handle, struct mpage_da_data *mpd)
* writeback and there is nothing we can do about it so it might result
* in data loss. So use reserved blocks to allocate metadata if
* possible.
- *
- * We pass in the magic EXT4_GET_BLOCKS_DELALLOC_RESERVE if
- * the blocks in question are delalloc blocks. This indicates
- * that the blocks and quotas has already been checked when
- * the data was copied into the page cache.
*/
get_blocks_flags = EXT4_GET_BLOCKS_CREATE |
EXT4_GET_BLOCKS_METADATA_NOFAIL |
@@ -2236,8 +2239,6 @@ static int mpage_map_one_extent(handle_t *handle, struct mpage_da_data *mpd)
dioread_nolock = ext4_should_dioread_nolock(inode);
if (dioread_nolock)
get_blocks_flags |= EXT4_GET_BLOCKS_IO_CREATE_EXT;
- if (map->m_flags & BIT(BH_Delay))
- get_blocks_flags |= EXT4_GET_BLOCKS_DELALLOC_RESERVE;
err = ext4_map_blocks(handle, inode, map, get_blocks_flags);
if (err < 0)
--
2.39.2
next prev parent reply other threads:[~2024-08-13 12:39 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-13 12:34 [PATCH v3 00/12] ext4: simplify the counting and management of delalloc reserved blocks Zhang Yi
2024-08-13 12:34 ` [PATCH v3 01/12] ext4: factor out ext4_map_create_blocks() to allocate new blocks Zhang Yi
2024-08-13 12:34 ` Zhang Yi [this message]
2024-08-13 12:34 ` [PATCH v3 03/12] ext4: don't set EXTENT_STATUS_DELAYED on allocated blocks Zhang Yi
2024-08-13 12:34 ` [PATCH v3 04/12] ext4: let __revise_pending() return newly inserted pendings Zhang Yi
2024-09-04 10:15 ` Jan Kara
2024-09-04 10:23 ` Jan Kara
2024-08-13 12:34 ` [PATCH v3 05/12] ext4: passing block allocation information to ext4_es_insert_extent() Zhang Yi
2024-09-04 10:21 ` Jan Kara
2024-09-04 11:43 ` Zhang Yi
2024-08-13 12:34 ` [PATCH v3 06/12] ext4: update delalloc data reserve spcae in ext4_es_insert_extent() Zhang Yi
2024-09-04 10:22 ` Jan Kara
2024-08-13 12:34 ` [PATCH v3 07/12] ext4: drop ext4_es_delayed_clu() Zhang Yi
2024-09-04 10:25 ` Jan Kara
2024-08-13 12:34 ` [PATCH v3 08/12] ext4: use ext4_map_query_blocks() in ext4_map_blocks() Zhang Yi
2024-08-13 12:34 ` [PATCH v3 09/12] ext4: drop unused ext4_es_store_status() Zhang Yi
2024-09-04 10:25 ` Jan Kara
2024-08-13 12:34 ` [PATCH v3 10/12] ext4: make extent status types exclusive Zhang Yi
2024-09-04 10:28 ` Jan Kara
2024-08-13 12:34 ` [PATCH v3 11/12] ext4: drop ext4_es_is_delonly() Zhang Yi
2024-09-04 10:28 ` Jan Kara
2024-08-13 12:34 ` [PATCH v3 12/12] ext4: drop all delonly descriptions Zhang Yi
2024-09-04 10:31 ` Jan Kara
2024-09-05 14:53 ` [PATCH v3 00/12] ext4: simplify the counting and management of delalloc reserved blocks Theodore Ts'o
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240813123452.2824659-3-yi.zhang@huaweicloud.com \
--to=yi.zhang@huaweicloud.com \
--cc=adilger.kernel@dilger.ca \
--cc=chengzhihao1@huawei.com \
--cc=jack@suse.cz \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ritesh.list@gmail.com \
--cc=tytso@mit.edu \
--cc=yi.zhang@huawei.com \
--cc=yukuai3@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).