From: Zhang Yi <yi.zhang@huaweicloud.com>
To: linux-ext4@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
tytso@mit.edu, adilger.kernel@dilger.ca, jack@suse.cz,
leah.rumancik@gmail.com, yi.zhang@huawei.com,
yi.zhang@huaweicloud.com, libaokun1@huawei.com,
chengzhihao1@huawei.com, yukuai3@huawei.com,
yangerkun@huawei.com
Subject: [PATCH] jbd2: fix off-by-one while erasing journal
Date: Mon, 17 Feb 2025 14:59:55 +0800 [thread overview]
Message-ID: <20250217065955.3829229-1-yi.zhang@huaweicloud.com> (raw)
From: Zhang Yi <yi.zhang@huawei.com>
In __jbd2_journal_erase(), the block_stop parameter includes the last
block of a contiguous region; however, the calculation of byte_stop is
incorrect, as it does not account for the bytes in that last block.
Consequently, the page cache is not cleared properly, which occasionally
causes the ext4/050 test to fail.
Since block_stop operates on inclusion semantics, it involves repeated
increments and decrements by 1, significantly increasing the complexity
of the calculations. Optimize the calculation and fix the incorrect
byte_stop by make both block_stop and byte_stop to use exclusion
semantics.
This fixes a failure in fstests ext4/050.
Fixes: 01d5d96542fd ("ext4: add discard/zeroout flags to journal flush")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
---
fs/jbd2/journal.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index d8084b31b361..49a9e99cbc03 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -1965,17 +1965,15 @@ static int __jbd2_journal_erase(journal_t *journal, unsigned int flags)
return err;
}
- if (block_start == ~0ULL) {
- block_start = phys_block;
- block_stop = block_start - 1;
- }
+ if (block_start == ~0ULL)
+ block_stop = block_start = phys_block;
/*
* last block not contiguous with current block,
* process last contiguous region and return to this block on
* next loop
*/
- if (phys_block != block_stop + 1) {
+ if (phys_block != block_stop) {
block--;
} else {
block_stop++;
@@ -1994,11 +1992,10 @@ static int __jbd2_journal_erase(journal_t *journal, unsigned int flags)
*/
byte_start = block_start * journal->j_blocksize;
byte_stop = block_stop * journal->j_blocksize;
- byte_count = (block_stop - block_start + 1) *
- journal->j_blocksize;
+ byte_count = (block_stop - block_start) * journal->j_blocksize;
truncate_inode_pages_range(journal->j_dev->bd_mapping,
- byte_start, byte_stop);
+ byte_start, byte_stop - 1);
if (flags & JBD2_JOURNAL_FLUSH_DISCARD) {
err = blkdev_issue_discard(journal->j_dev,
@@ -2013,7 +2010,7 @@ static int __jbd2_journal_erase(journal_t *journal, unsigned int flags)
}
if (unlikely(err != 0)) {
- pr_err("JBD2: (error %d) unable to wipe journal at physical blocks %llu - %llu",
+ pr_err("JBD2: (error %d) unable to wipe journal at physical blocks [%llu, %llu)",
err, block_start, block_stop);
return err;
}
--
2.46.1
next reply other threads:[~2025-02-17 7:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-17 6:59 Zhang Yi [this message]
2025-02-18 19:45 ` [PATCH] jbd2: fix off-by-one while erasing journal Jan Kara
2025-02-19 12:29 ` Baokun Li
2025-03-18 3:41 ` Theodore Ts'o
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250217065955.3829229-1-yi.zhang@huaweicloud.com \
--to=yi.zhang@huaweicloud.com \
--cc=adilger.kernel@dilger.ca \
--cc=chengzhihao1@huawei.com \
--cc=jack@suse.cz \
--cc=leah.rumancik@gmail.com \
--cc=libaokun1@huawei.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tytso@mit.edu \
--cc=yangerkun@huawei.com \
--cc=yi.zhang@huawei.com \
--cc=yukuai3@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).