[PATCH v6 2/9] coredump: massage do_coredump()

[Christian Brauner <brauner@kernel.org>]

We're going to extend the coredump code in follow-up patches.
Clean it up so we can do this more easily.

Signed-off-by: Christian Brauner <brauner@kernel.org>
---
 fs/coredump.c | 122 +++++++++++++++++++++++++++++++---------------------------
 1 file changed, 65 insertions(+), 57 deletions(-)

diff --git a/fs/coredump.c b/fs/coredump.c
index 368751d98781..0e97c21b35e3 100644
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -646,63 +646,8 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 		goto fail_unlock;
 	}
 
-	if (cn.core_type == COREDUMP_PIPE) {
-		int argi;
-		int dump_count;
-		char **helper_argv;
-		struct subprocess_info *sub_info;
-
-		if (cprm.limit == 1) {
-			/* See umh_coredump_setup() which sets RLIMIT_CORE = 1.
-			 *
-			 * Normally core limits are irrelevant to pipes, since
-			 * we're not writing to the file system, but we use
-			 * cprm.limit of 1 here as a special value, this is a
-			 * consistent way to catch recursive crashes.
-			 * We can still crash if the core_pattern binary sets
-			 * RLIM_CORE = !1, but it runs as root, and can do
-			 * lots of stupid things.
-			 *
-			 * Note that we use task_tgid_vnr here to grab the pid
-			 * of the process group leader.  That way we get the
-			 * right pid if a thread in a multi-threaded
-			 * core_pattern process dies.
-			 */
-			coredump_report_failure("RLIMIT_CORE is set to 1, aborting core");
-			goto fail_unlock;
-		}
-		cprm.limit = RLIM_INFINITY;
-
-		dump_count = atomic_inc_return(&core_dump_count);
-		if (core_pipe_limit && (core_pipe_limit < dump_count)) {
-			coredump_report_failure("over core_pipe_limit, skipping core dump");
-			goto fail_dropcount;
-		}
-
-		helper_argv = kmalloc_array(argc + 1, sizeof(*helper_argv),
-					    GFP_KERNEL);
-		if (!helper_argv) {
-			coredump_report_failure("%s failed to allocate memory", __func__);
-			goto fail_dropcount;
-		}
-		for (argi = 0; argi < argc; argi++)
-			helper_argv[argi] = cn.corename + argv[argi];
-		helper_argv[argi] = NULL;
-
-		retval = -ENOMEM;
-		sub_info = call_usermodehelper_setup(helper_argv[0],
-						helper_argv, NULL, GFP_KERNEL,
-						umh_coredump_setup, NULL, &cprm);
-		if (sub_info)
-			retval = call_usermodehelper_exec(sub_info,
-							  UMH_WAIT_EXEC);
-
-		kfree(helper_argv);
-		if (retval) {
-			coredump_report_failure("|%s pipe failed", cn.corename);
-			goto close_fail;
-		}
-	} else if (cn.core_type == COREDUMP_FILE) {
+	switch (cn.core_type) {
+	case COREDUMP_FILE: {
 		struct mnt_idmap *idmap;
 		struct inode *inode;
 		int open_flags = O_CREAT | O_WRONLY | O_NOFOLLOW |
@@ -796,6 +741,69 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 		if (do_truncate(idmap, cprm.file->f_path.dentry,
 				0, 0, cprm.file))
 			goto close_fail;
+		break;
+	}
+	case COREDUMP_PIPE: {
+		int argi;
+		int dump_count;
+		char **helper_argv;
+		struct subprocess_info *sub_info;
+
+		if (cprm.limit == 1) {
+			/* See umh_coredump_setup() which sets RLIMIT_CORE = 1.
+			 *
+			 * Normally core limits are irrelevant to pipes, since
+			 * we're not writing to the file system, but we use
+			 * cprm.limit of 1 here as a special value, this is a
+			 * consistent way to catch recursive crashes.
+			 * We can still crash if the core_pattern binary sets
+			 * RLIM_CORE = !1, but it runs as root, and can do
+			 * lots of stupid things.
+			 *
+			 * Note that we use task_tgid_vnr here to grab the pid
+			 * of the process group leader.  That way we get the
+			 * right pid if a thread in a multi-threaded
+			 * core_pattern process dies.
+			 */
+			coredump_report_failure("RLIMIT_CORE is set to 1, aborting core");
+			goto fail_unlock;
+		}
+		cprm.limit = RLIM_INFINITY;
+
+		dump_count = atomic_inc_return(&core_dump_count);
+		if (core_pipe_limit && (core_pipe_limit < dump_count)) {
+			coredump_report_failure("over core_pipe_limit, skipping core dump");
+			goto fail_dropcount;
+		}
+
+		helper_argv = kmalloc_array(argc + 1, sizeof(*helper_argv),
+					    GFP_KERNEL);
+		if (!helper_argv) {
+			coredump_report_failure("%s failed to allocate memory", __func__);
+			goto fail_dropcount;
+		}
+		for (argi = 0; argi < argc; argi++)
+			helper_argv[argi] = cn.corename + argv[argi];
+		helper_argv[argi] = NULL;
+
+		retval = -ENOMEM;
+		sub_info = call_usermodehelper_setup(helper_argv[0],
+						helper_argv, NULL, GFP_KERNEL,
+						umh_coredump_setup, NULL, &cprm);
+		if (sub_info)
+			retval = call_usermodehelper_exec(sub_info,
+							  UMH_WAIT_EXEC);
+
+		kfree(helper_argv);
+		if (retval) {
+			coredump_report_failure("|%s pipe failed", cn.corename);
+			goto close_fail;
+		}
+		break;
+	}
+	default:
+		WARN_ON_ONCE(true);
+		goto close_fail;
 	}
 
 	/* get us an unshared descriptor table; almost always a no-op */

-- 
2.47.2