linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrey Albershteyn <aalbersh@redhat.com>
To: aalbersh@kernel.org, linux-fsdevel@vger.kernel.org,
	 linux-xfs@vger.kernel.org
Cc: Andrey Albershteyn <aalbersh@redhat.com>
Subject: [PATCH 2/4] xfs_quota: utilize file_setattr to set prjid on special files
Date: Fri, 08 Aug 2025 21:30:17 +0200	[thread overview]
Message-ID: <20250808-xattrat-syscall-v1-2-48567c29e45c@kernel.org> (raw)
In-Reply-To: <20250808-xattrat-syscall-v1-0-48567c29e45c@kernel.org>

From: Andrey Albershteyn <aalbersh@redhat.com>

Utilize new file_getattr/file_setattr syscalls to set project ID on
special files. Previously, special files were skipped due to lack of the
way to call FS_IOC_SETFSXATTR ioctl on them. The quota accounting was
therefore missing these inodes (special files created before project
setup). The ones created after porject initialization did inherit the
projid flag from the parent.

Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
---
 quota/project.c | 144 +++++++++++++++++++++++++++++---------------------------
 1 file changed, 74 insertions(+), 70 deletions(-)

diff --git a/quota/project.c b/quota/project.c
index adb26945fa57..93d7ace0e11b 100644
--- a/quota/project.c
+++ b/quota/project.c
@@ -4,14 +4,17 @@
  * All Rights Reserved.
  */
 
+#include <unistd.h>
 #include "command.h"
 #include "input.h"
 #include "init.h"
+#include "libfrog/file_attr.h"
 #include "quota.h"
 
 static cmdinfo_t project_cmd;
 static prid_t prid;
 static int recurse_depth = -1;
+static int dfd;
 
 enum {
 	CHECK_PROJECT	= 0x1,
@@ -19,13 +22,6 @@ enum {
 	CLEAR_PROJECT	= 0x4,
 };
 
-#define EXCLUDED_FILE_TYPES(x) \
-	   (S_ISCHR((x)) \
-	|| S_ISBLK((x)) \
-	|| S_ISFIFO((x)) \
-	|| S_ISLNK((x)) \
-	|| S_ISSOCK((x)))
-
 static void
 project_help(void)
 {
@@ -85,8 +81,8 @@ check_project(
 	int			flag,
 	struct FTW		*data)
 {
-	struct fsxattr		fsx;
-	int			fd;
+	int			error;
+	struct file_attr	fa = { 0 };
 
 	if (recurse_depth >= 0 && data->level > recurse_depth)
 		return 0;
@@ -96,30 +92,30 @@ check_project(
 		fprintf(stderr, _("%s: cannot stat file %s\n"), progname, path);
 		return 0;
 	}
-	if (EXCLUDED_FILE_TYPES(stat->st_mode)) {
-		fprintf(stderr, _("%s: skipping special file %s\n"), progname, path);
-		return 0;
-	}
 
-	if ((fd = open(path, O_RDONLY|O_NOCTTY)) == -1) {
-		exitcode = 1;
-		fprintf(stderr, _("%s: cannot open %s: %s\n"),
-			progname, path, strerror(errno));
-	} else if ((xfsctl(path, fd, FS_IOC_FSGETXATTR, &fsx)) < 0) {
-		exitcode = 1;
+	error = file_getattr(dfd, path, stat, &fa, AT_SYMLINK_NOFOLLOW);
+	if (error) {
+#ifndef HAVE_FILE_ATTR
+		if (SPECIAL_FILE(stat->st_mode)) {
+			fprintf(stderr, _("%s: skipping special file %s\n"),
+					progname, path);
+			return 0;
+		}
+#endif
 		fprintf(stderr, _("%s: cannot get flags on %s: %s\n"),
-			progname, path, strerror(errno));
-	} else {
-		if (fsx.fsx_projid != prid)
-			printf(_("%s - project identifier is not set"
-				 " (inode=%u, tree=%u)\n"),
-				path, fsx.fsx_projid, (unsigned int)prid);
-		if (!(fsx.fsx_xflags & FS_XFLAG_PROJINHERIT) && S_ISDIR(stat->st_mode))
-			printf(_("%s - project inheritance flag is not set\n"),
-				path);
+				progname, path, strerror(errno));
+		exitcode = 1;
+		return 0;
 	}
-	if (fd != -1)
-		close(fd);
+
+	if (fa.fa_projid != prid)
+		printf(_("%s - project identifier is not set"
+				" (inode=%u, tree=%u)\n"),
+			path, fa.fa_projid, (unsigned int)prid);
+	if (!(fa.fa_xflags & FS_XFLAG_PROJINHERIT) && S_ISDIR(stat->st_mode))
+		printf(_("%s - project inheritance flag is not set\n"),
+			path);
+
 	return 0;
 }
 
@@ -130,8 +126,8 @@ clear_project(
 	int			flag,
 	struct FTW		*data)
 {
-	struct fsxattr		fsx;
-	int			fd;
+	int			error;
+	struct file_attr	fa;
 
 	if (recurse_depth >= 0 && data->level > recurse_depth)
 		return 0;
@@ -141,32 +137,31 @@ clear_project(
 		fprintf(stderr, _("%s: cannot stat file %s\n"), progname, path);
 		return 0;
 	}
-	if (EXCLUDED_FILE_TYPES(stat->st_mode)) {
-		fprintf(stderr, _("%s: skipping special file %s\n"), progname, path);
-		return 0;
-	}
 
-	if ((fd = open(path, O_RDONLY|O_NOCTTY)) == -1) {
-		exitcode = 1;
-		fprintf(stderr, _("%s: cannot open %s: %s\n"),
-			progname, path, strerror(errno));
-		return 0;
-	} else if (xfsctl(path, fd, FS_IOC_FSGETXATTR, &fsx) < 0) {
-		exitcode = 1;
+	error = file_getattr(dfd, path, stat, &fa, AT_SYMLINK_NOFOLLOW);
+	if (error) {
+#ifndef HAVE_FILE_ATTR
+		if (SPECIAL_FILE(stat->st_mode)) {
+			fprintf(stderr, _("%s: skipping special file %s\n"),
+					progname, path);
+			return 0;
+		}
+#endif
 		fprintf(stderr, _("%s: cannot get flags on %s: %s\n"),
-			progname, path, strerror(errno));
-		close(fd);
+				progname, path, strerror(errno));
+		exitcode = 1;
 		return 0;
 	}
 
-	fsx.fsx_projid = 0;
-	fsx.fsx_xflags &= ~FS_XFLAG_PROJINHERIT;
-	if (xfsctl(path, fd, FS_IOC_FSSETXATTR, &fsx) < 0) {
-		exitcode = 1;
+	fa.fa_projid = 0;
+	fa.fa_xflags &= ~FS_XFLAG_PROJINHERIT;
+
+	error = file_setattr(dfd, path, stat, &fa, AT_SYMLINK_NOFOLLOW);
+	if (error) {
 		fprintf(stderr, _("%s: cannot clear project on %s: %s\n"),
 			progname, path, strerror(errno));
+		exitcode = 1;
 	}
-	close(fd);
 	return 0;
 }
 
@@ -177,8 +172,8 @@ setup_project(
 	int			flag,
 	struct FTW		*data)
 {
-	struct fsxattr		fsx;
-	int			fd;
+	struct file_attr	fa;
+	int			error;
 
 	if (recurse_depth >= 0 && data->level > recurse_depth)
 		return 0;
@@ -188,32 +183,32 @@ setup_project(
 		fprintf(stderr, _("%s: cannot stat file %s\n"), progname, path);
 		return 0;
 	}
-	if (EXCLUDED_FILE_TYPES(stat->st_mode)) {
-		fprintf(stderr, _("%s: skipping special file %s\n"), progname, path);
-		return 0;
-	}
 
-	if ((fd = open(path, O_RDONLY|O_NOCTTY)) == -1) {
-		exitcode = 1;
-		fprintf(stderr, _("%s: cannot open %s: %s\n"),
-			progname, path, strerror(errno));
-		return 0;
-	} else if (xfsctl(path, fd, FS_IOC_FSGETXATTR, &fsx) < 0) {
-		exitcode = 1;
+	error = file_getattr(dfd, path, stat, &fa, AT_SYMLINK_NOFOLLOW);
+	if (error) {
+#ifndef HAVE_FILE_ATTR
+		if (SPECIAL_FILE(stat->st_mode)) {
+			fprintf(stderr, _("%s: skipping special file %s\n"),
+					progname, path);
+			return 0;
+		}
+#endif
 		fprintf(stderr, _("%s: cannot get flags on %s: %s\n"),
-			progname, path, strerror(errno));
-		close(fd);
+				progname, path, strerror(errno));
+		exitcode = 1;
 		return 0;
 	}
 
-	fsx.fsx_projid = prid;
-	fsx.fsx_xflags |= FS_XFLAG_PROJINHERIT;
-	if (xfsctl(path, fd, FS_IOC_FSSETXATTR, &fsx) < 0) {
-		exitcode = 1;
+	fa.fa_projid = prid;
+	if (S_ISDIR(stat->st_mode))
+		fa.fa_xflags |= FS_XFLAG_PROJINHERIT;
+
+	error = file_setattr(dfd, path, stat, &fa, AT_SYMLINK_NOFOLLOW);
+	if (error) {
 		fprintf(stderr, _("%s: cannot set project on %s: %s\n"),
 			progname, path, strerror(errno));
+		exitcode = 1;
 	}
-	close(fd);
 	return 0;
 }
 
@@ -223,6 +218,13 @@ project_operations(
 	char		*dir,
 	int		type)
 {
+	dfd = open(dir, O_RDONLY|O_NOCTTY);
+	if (dfd < -1) {
+		printf(_("Error opening dir %s for project %s...\n"), dir,
+				project);
+		return;
+	}
+
 	switch (type) {
 	case CHECK_PROJECT:
 		printf(_("Checking project %s (path %s)...\n"), project, dir);
@@ -237,6 +239,8 @@ project_operations(
 		nftw(dir, clear_project, 100, FTW_PHYS|FTW_MOUNT);
 		break;
 	}
+
+	close(dfd);
 }
 
 static void

-- 
2.49.0


  parent reply	other threads:[~2025-08-08 19:30 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-08 19:28 Tests for file_getattr()/file_setattr() and xfsprogs update Andrey Albershteyn
2025-08-08 19:30 ` [PATCH 0/4] xfsprogs: utilize file_getattr() and file_setattr() Andrey Albershteyn
2025-08-08 19:30   ` [PATCH 1/4] libfrog: add wrappers for file_getattr/file_setattr syscalls Andrey Albershteyn
2025-08-11 15:02     ` Darrick J. Wong
2025-08-11 17:44       ` Andrey Albershteyn
2025-08-12 14:53         ` Darrick J. Wong
2025-08-08 19:30   ` Andrey Albershteyn [this message]
2025-08-11 15:07     ` [PATCH 2/4] xfs_quota: utilize file_setattr to set prjid on special files Darrick J. Wong
2025-08-11 17:51       ` Andrey Albershteyn
2025-08-08 19:30   ` [PATCH 3/4] xfs_io: make ls/chattr work with " Andrey Albershteyn
2025-08-11 15:12     ` Darrick J. Wong
2025-08-11 17:57       ` Andrey Albershteyn
2025-08-12 17:28         ` Darrick J. Wong
2025-08-08 19:30   ` [PATCH 4/4] xfs_db: use file_setattr to copy attributes on special files with rdump Andrey Albershteyn
2025-08-11 15:14     ` Darrick J. Wong
2025-08-11 17:59       ` Andrey Albershteyn
2025-08-08 19:31 ` [PATCH 0/3] Test file_getattr and file_setattr syscalls Andrey Albershteyn
2025-08-08 19:31   ` [PATCH 1/3] file_attr: introduce program to set/get fsxattr Andrey Albershteyn
2025-08-11 15:23     ` Darrick J. Wong
2025-08-11 18:06       ` Andrey Albershteyn
2025-08-11 17:51     ` Zorro Lang
2025-08-11 18:12       ` Andrey Albershteyn
2025-08-08 19:31   ` [PATCH 2/3] generic: introduce test to test file_getattr/file_setattr syscalls Andrey Albershteyn
2025-08-11 15:17     ` Darrick J. Wong
2025-08-11 18:13       ` Andrey Albershteyn
2025-08-11 17:55     ` Zorro Lang
2025-08-11 18:18       ` Andrey Albershteyn
2025-08-11 18:43         ` Zorro Lang
2025-08-08 19:31   ` [PATCH 3/3] xfs: test quota's project ID on special files Andrey Albershteyn
2025-08-11 15:21     ` Darrick J. Wong
2025-08-11 18:21       ` Andrey Albershteyn
2025-08-11 17:46     ` Zorro Lang
2025-08-11 18:20       ` Andrey Albershteyn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250808-xattrat-syscall-v1-2-48567c29e45c@kernel.org \
    --to=aalbersh@redhat.com \
    --cc=aalbersh@kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).