Linux filesystem development
 help / color / mirror / Atom feed
From: "Darrick J. Wong" <djwong@kernel.org>
To: Kanchan Joshi <joshi.k@samsung.com>
Cc: brauner@kernel.org, hch@lst.de, jack@suse.cz, cem@kernel.org,
	kbusch@kernel.org, axboe@kernel.dk, linux-xfs@vger.kernel.org,
	linux-fsdevel@vger.kernel.org, gost.dev@samsung.com
Subject: Re: [PATCH v2 3/5] xfs: implement write-stream management support
Date: Mon, 9 Mar 2026 09:38:39 -0700	[thread overview]
Message-ID: <20260309163839.GG6033@frogsfrogsfrogs> (raw)
In-Reply-To: <20260309052944.156054-4-joshi.k@samsung.com>

On Mon, Mar 09, 2026 at 10:59:42AM +0530, Kanchan Joshi wrote:
> Implement support for FS_IOC_WRITE_STREAM ioctl.
> 
> For FS_WRITE_STREAM_OP_GET_MAX, available write streams are reported
> based on the capability of the underlying block device.
> For FS_WRITE_STREAM_OP_{SET/GET}, add a new i_write_stream field in xfs
> inode. This value is propagated to the iomap during block mapping.
> 
> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
> ---
>  fs/xfs/xfs_icache.c |  1 +
>  fs/xfs/xfs_inode.c  | 46 +++++++++++++++++++++++++++++++++++++++++++++
>  fs/xfs/xfs_inode.h  |  6 ++++++
>  fs/xfs/xfs_ioctl.c  | 34 +++++++++++++++++++++++++++++++++
>  fs/xfs/xfs_iomap.c  |  1 +
>  5 files changed, 88 insertions(+)
> 
> diff --git a/fs/xfs/xfs_icache.c b/fs/xfs/xfs_icache.c
> index a7a09e7eec81..2ad8d02152f4 100644
> --- a/fs/xfs/xfs_icache.c
> +++ b/fs/xfs/xfs_icache.c
> @@ -130,6 +130,7 @@ xfs_inode_alloc(
>  	spin_lock_init(&ip->i_ioend_lock);
>  	ip->i_next_unlinked = NULLAGINO;
>  	ip->i_prev_unlinked = 0;
> +	ip->i_write_stream = 0;
>  
>  	return ip;
>  }
> diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
> index 50c0404f9064..9b88b2d1cf9a 100644
> --- a/fs/xfs/xfs_inode.c
> +++ b/fs/xfs/xfs_inode.c
> @@ -47,6 +47,52 @@
>  
>  struct kmem_cache *xfs_inode_cache;
>  
> +int
> +xfs_inode_max_write_streams(
> +	struct xfs_inode	*ip)
> +{
> +	struct xfs_mount	*mp = ip->i_mount;
> +	struct block_device	*bdev;
> +
> +	if (XFS_IS_REALTIME_INODE(ip))
> +		bdev = mp->m_rtdev_targp ? mp->m_rtdev_targp->bt_bdev : NULL;

Uhh if this is a realtime inode then there had better be an
m_rtdev_targp to dereference.

Also... this is xfs_inode_buftarg().

> +	else
> +		bdev = mp->m_ddev_targp->bt_bdev;
> +
> +	if (!bdev)
> +		return 0;
> +
> +	return bdev_max_write_streams(bdev);
> +}
> +
> +uint8_t
> +xfs_inode_get_write_stream(
> +	struct xfs_inode	*ip)
> +{
> +	uint8_t		stream_id;
> +
> +	xfs_ilock(ip, XFS_ILOCK_SHARED);
> +	stream_id = ip->i_write_stream;
> +	xfs_iunlock(ip, XFS_ILOCK_SHARED);
> +
> +	return stream_id;
> +}
> +
> +int
> +xfs_inode_set_write_stream(
> +	struct xfs_inode	*ip,
> +	uint8_t			stream_id)
> +{
> +	if (stream_id > xfs_inode_max_write_streams(ip))

Inodes can change devices, so this needs to go under the ILOCK.

> +		return -EINVAL;
> +
> +	xfs_ilock(ip, XFS_ILOCK_EXCL);
> +	ip->i_write_stream =  stream_id;
> +	xfs_iunlock(ip, XFS_ILOCK_EXCL);
> +
> +	return 0;
> +}
> +
>  /*
>   * These two are wrapper routines around the xfs_ilock() routine used to
>   * centralize some grungy code.  They are used in places that wish to lock the
> diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
> index bd6d33557194..9f6cab729924 100644
> --- a/fs/xfs/xfs_inode.h
> +++ b/fs/xfs/xfs_inode.h
> @@ -38,6 +38,9 @@ typedef struct xfs_inode {
>  	struct xfs_ifork	i_df;		/* data fork */
>  	struct xfs_ifork	i_af;		/* attribute fork */
>  
> +	/* Write stream information */
> +	uint8_t			i_write_stream;

I'm confused, bdev_max_write_streams returns an unsigned short, but this
is a uint8_t field.  How are we supposed to deal with truncation issues?

--D

> +
>  	/* Transaction and locking information. */
>  	struct xfs_inode_log_item *i_itemp;	/* logging information */
>  	struct rw_semaphore	i_lock;		/* inode lock */
> @@ -676,4 +679,7 @@ int xfs_icreate_dqalloc(const struct xfs_icreate_args *args,
>  		struct xfs_dquot **udqpp, struct xfs_dquot **gdqpp,
>  		struct xfs_dquot **pdqpp);
>  
> +int xfs_inode_max_write_streams(struct xfs_inode *ip);
> +uint8_t xfs_inode_get_write_stream(struct xfs_inode *ip);
> +int xfs_inode_set_write_stream(struct xfs_inode *ip, uint8_t stream_id);
>  #endif	/* __XFS_INODE_H__ */
> diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c
> index facffdc8dca8..091d6a8b5f57 100644
> --- a/fs/xfs/xfs_ioctl.c
> +++ b/fs/xfs/xfs_ioctl.c
> @@ -1160,6 +1160,38 @@ xfs_ioctl_fs_counts(
>  	return 0;
>  }
>  
> +static int
> +xfs_ioc_write_stream(
> +	struct file		*filp,
> +	void __user		*arg)
> +{
> +	struct inode		*inode = file_inode(filp);
> +	struct xfs_inode	*ip = XFS_I(inode);
> +	struct fs_write_stream	ws = { };
> +
> +	if (copy_from_user(&ws, arg, sizeof(ws)))
> +		return -EFAULT;
> +
> +	switch (ws.op_flags) {
> +	case FS_WRITE_STREAM_OP_GET_MAX:
> +		ws.max_streams = xfs_inode_max_write_streams(ip);
> +		goto copy_out;
> +	case FS_WRITE_STREAM_OP_GET:
> +		ws.stream_id = xfs_inode_get_write_stream(ip);
> +		goto copy_out;
> +	case FS_WRITE_STREAM_OP_SET:
> +		return xfs_inode_set_write_stream(ip, ws.stream_id);
> +	default:
> +		return -EINVAL;
> +	}
> +	return 0;
> +
> +copy_out:
> +	if (copy_to_user(arg, &ws, sizeof(ws)))
> +		return -EFAULT;
> +	return 0;
> +}
> +
>  /*
>   * These long-unused ioctls were removed from the official ioctl API in 5.17,
>   * but retain these definitions so that we can log warnings about them.
> @@ -1425,6 +1457,8 @@ xfs_file_ioctl(
>  		return xfs_ioc_health_monitor(filp, arg);
>  	case XFS_IOC_VERIFY_MEDIA:
>  		return xfs_ioc_verify_media(filp, arg);
> +	case FS_IOC_WRITE_STREAM:
> +		return xfs_ioc_write_stream(filp, arg);
>  
>  	default:
>  		return -ENOTTY;
> diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
> index be86d43044df..7988c9e16635 100644
> --- a/fs/xfs/xfs_iomap.c
> +++ b/fs/xfs/xfs_iomap.c
> @@ -148,6 +148,7 @@ xfs_bmbt_to_iomap(
>  	else
>  		iomap->bdev = target->bt_bdev;
>  	iomap->flags = iomap_flags;
> +	iomap->write_stream = ip->i_write_stream;
>  
>  	/*
>  	 * If the inode is dirty for datasync purposes, let iomap know so it
> -- 
> 2.25.1
> 
> 

  reply	other threads:[~2026-03-09 16:38 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20260309053425epcas5p32886580a4fbe646ceee66f2864970e9f@epcas5p3.samsung.com>
2026-03-09  5:29 ` [PATCH v2 0/5] write streams and xfs spatial isolation Kanchan Joshi
2026-03-09  5:29   ` [PATCH v2 1/5] fs: add generic write-stream management ioctl Kanchan Joshi
2026-03-09 16:33     ` Darrick J. Wong
2026-03-10 17:55       ` Kanchan Joshi
2026-03-10 20:44         ` Darrick J. Wong
2026-03-09  5:29   ` [PATCH v2 2/5] iomap: introduce and propagate write_stream Kanchan Joshi
2026-03-09 16:34     ` Darrick J. Wong
2026-03-10 17:58       ` Kanchan Joshi
2026-03-09  5:29   ` [PATCH v2 3/5] xfs: implement write-stream management support Kanchan Joshi
2026-03-09 16:38     ` Darrick J. Wong [this message]
2026-03-10 18:07       ` Kanchan Joshi
2026-03-09  5:29   ` [PATCH v2 4/5] xfs: steer allocation using write stream Kanchan Joshi
2026-03-09 12:45     ` kernel test robot
2026-03-09 20:01     ` kernel test robot
2026-03-10  5:47     ` Dave Chinner
2026-03-10 19:03       ` Kanchan Joshi
2026-03-10 22:44         ` Dave Chinner
2026-03-11  9:59           ` Kanchan Joshi
2026-03-09  5:29   ` [PATCH v2 5/5] xfs: introduce software write streams Kanchan Joshi
2026-03-10  6:01     ` Dave Chinner
2026-03-09 15:40   ` [PATCH v2 0/5] write streams and xfs spatial isolation Christoph Hellwig
2026-03-10 21:19     ` Kanchan Joshi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260309163839.GG6033@frogsfrogsfrogs \
    --to=djwong@kernel.org \
    --cc=axboe@kernel.dk \
    --cc=brauner@kernel.org \
    --cc=cem@kernel.org \
    --cc=gost.dev@samsung.com \
    --cc=hch@lst.de \
    --cc=jack@suse.cz \
    --cc=joshi.k@samsung.com \
    --cc=kbusch@kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox